TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Mini 4WD Shirokumakko (Finished Model)

Wednesday, 02 January 2019 15:40 Published in Tamiya

Mini 4WD Product

Mini 4WD Shirokumakko (Finished Model)

Item No:95227

★This finished Mini 4WD model comes with a 'Shirokumakko' (polar bear) driver figure. ★ The product comes with stickers applied to the body and pre-painted figure, and with the light blue and white chassis also pre-assembled.

The information on this page is current as of September 8, 2015. Specifications are subject to change without notice.

Black Plated Screw Set

Wednesday, 02 January 2019 15:38 Published in Tamiya

Mini 4WD Product

Black Plated Screw Set

Item No: 95233

★These screws have black metal plating and feature a stylish look. ★Set includes an assortment of lengths of 2mm screws as well as 2mm lock nuts and washers which are often used on Mini 4WD machines. ★Set also includes 1.5mm, 3mm, and 6mm aluminum spacers.

★Compatible with: Mini 4WD and Mini 4WD PRO cars.

Information is correct as of November 6, 2015. Specifications are subject to change without notice.

Needle Nose W/Cutter II

Wednesday, 02 January 2019 15:36 Published in Tamiya

Tamiya Craft Tools Series no.146

Needle Nose W/Cutter II

Item No: 74146

★Needle nose pliers for use on R/C, static model products and more, with long, slimline jaws providing superb grip. ★The pliers can be used as one would tweezers, and are also suitable for bending and cutting materials such as brass wire. ★Jaws are treated chromium-vanadium steel.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Fine Engraving Blade 0.4mm

Wednesday, 02 January 2019 15:34 Published in Tamiya

Tamiya Craft Tools Series no.147

Fine Engraving Blade 0.4mm

Item No: 74147

★This is a precision blade for engraving plastic models, offering an exacting finish and superb durability. ★Use it to engrave new details or emphasize existing ones. ★Includes one engraving blade of 0.4mm. ★The case can be used to store up to 10 blades. Cut out a section of the packaging for easy color-coded storage (corresponding color is marked on each blade).

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Tamiya Maintenance Tray (KTC)

Wednesday, 02 January 2019 15:31 Published in Tamiya

Original Goods

Tamiya Maintenance Tray (KTC)

Item No: 67416

★This is a collaboration between Tamiya and Japanese tool manufacturer KTC. ★The lightweight aluminum tray will make the perfect receptacle for screws and the like as you assemble or work on your R/C or other models. ★Features the Tamiya and KTC logos laser-engraved on the face. ★Matte finish gives a classy appearance. ★Dimensions (approx.): 210mm x 150mm x 30mm.

Information is correct as of December 5, 2018. Specifications are subject to change without notice.

Original Goods

Tamiya Multi-Purpose Furoshiki Cloth (MM 50th Anniversary, 90cm)

Item No: 67430

★The Japanese furoshiki is a versatile cloth that can be used in a multitude of everyday tasks depending upon how it is folded and tied. ★This is a special Tamiya design commemorating 50 years of the famous 1/35 Military Miniature Series: The cloth is royal blue, and dotted with silhouettes of famous members of the series in white. ★100% cotton. ★90cm x 90cm

Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Page 4 of 4

Social sharing

Who's Online

We have 217 guests online