Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)
Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
【 New Item 】
Fully Cowled Mini 4WD Series No.32
Sonic Saber Premium (Super-II Chassis)
Item No：19432
★Retsu Seiba was the lead character of Japanese comic magazine “Bakuso Kyodai Let's & Go” and his Sonic Saber now comes reproduced on Super-II chassis. ★Chassis is made with black polycarbonate ABS resin. Battery holder and rear stay are made with metallic green ABS resin. ★Black low profile tires are mounted on yellow 5-spoke wheels. ★Newly designed metallic-like stickers included. ★Requires two R6/AA/UM3 batteries (sold separately).
Information and specifications coming soon.
【 New Item 】
Craft Tool Series No.93
Modeler's Side Cutter α (Gray)
Item No：74093
★This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. ★Cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time.
Information and specifications coming soon.
Mini 4WD Aluminum Hex Mount Set (Red 10mm,15mm)
Wednesday, 26 January 2011 11:56 Published in Tamiya
【 New Item 】
Limited Edition Mini 4WD Product
Mini 4WD Aluminum Hex Mount Set (Red 10mm,15mm)
Item No：94790
These red-anodized aluminum hex mounts allow you to mount your rollers in a higher position or install two sets of FRP plates. Each mount has threaded ends to enable easy parts attachment/detachment.
Information and specifications coming soon.
Mini 4WD Aluminum Hex Mount Set (Blue 10mm,15mm)
Wednesday, 26 January 2011 11:48 Published in Tamiya【 New Item 】
Limited Edition Mini 4WD Product
Mini 4WD Aluminum Hex Mount Set (Blue 10mm,15mm)
Item No：94791
These blue-anodized aluminum hex mounts allow you to mount your rollers in a higher position or install two sets of FRP plates. Each mount has threaded ends to enable easy parts attachment/detachment.
Information and specifications coming soon.
【 New Item 】
Tamiya R/C System Series No.50
EXPEC GT-II 2.4G Radio Control System
Item No：45050
★This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Set includes a transmitter, a receiver, a receiver battery case, and two servos, making it ideal for use with glow engine cars. ★Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form. ★Requires four R6/AA/UM3 batteries for transmitter operation (sold separately).
Information and specifications coming soon.
【 New Item 】
1/10 Electric R/C Car Series No.482
Stadium Blitzer (2010)
Item No：58482
★This is a re-release 1/10 R/C assembly kit version of the Stadium Blitzer which was inspired by the exciting off-road racing truck designs seen in the United States. ★Tough and lightweight ABS bathtub chassis features a rear-mounted motor, rear wheel-drive layout. 4-wheel double wishbone suspension is equipped with C.V.A. shock units. ★2-channel R/C unit, battery pack & charger, and batteries for transmitter sold separately.
Information and specifications coming soon.
【 New Item 】
1/10 Electric R/C Car Series No.478
Nissan 370Z (TT-01 Type-E)
Item No：58478
★This is a 1/10 scale R/C assembly kit model of the 6th generation Z, the Nissan 370Z. ★The massive form of the car has been realistically reproduced with polycarbonate. Separately molded boomerang-shaped light cases are included. LEDs are also included to depict head (white) and tail (red) lights. ★2-channel R/C unit, battery pack & charger, and batteries for transmitter sold separately.
Information and specifications coming soon.
【 New Item 】
1/10 Electric R/C Car Series No.483
MINI Cooper '94 Monte Carlo (M-05)
Item No：58483
★This is a 1/10 scale R/C assembly kit model of the MINI Cooper which raced 1994 Monte Carlo rally. ★The distinctive MINI body has been molded with durable polycarbonate and features auxiliary lights and metal-plated bumpers to enhance scale realism. ★Radial tires are mounted onto 8-spoke wheels. ★2-channel R/C unit, battery pack & charger, and batteries for transmitter sold separately.
Information and specifications coming soon.
【 New Item 】
1/10 Electric R/C Car Series No.481
Ford SVT F-150 Lightning (TT-01 Type-E)
Item No：58481
★This is a 1/10 scale R/C assembly kit model of the Ford SVT F-150 Lightning pick-up truck. ★The dynamic truck body, including front bumper/spoiler and wide fenders, has been realistically reproduced with polycarbonate. ★A wide variety of Option Parts is available to further customize your machine. ★2-channel R/C unit, battery pack & charger, and batteries for transmitter sold separately.
Information and specifications coming soon.
LRP have announced that the 14th running of the LRP Touring Car masters will take place from the 25th to the 27th of March in Eppelheim, close to Heidelberg, Germany. Open to both modified and open stock classes, as well as the usual round of the LRP-HPI-Challenge, the event attracts big name drivers who will all be looking to prevent last year’s winner Ronald Volker from doing the double. Registration is already open and if you wish to enter you can do so by visiting the official event site
Our Products
Social sharing
Who's Online
We have 304 guests online
Powered by ©Tukang-web.com. All rights reserved.