TQ R/C & Hobbies

Limited Edition R/C Item

1/10 R/C Avante (2011) Black Special

Item No：84270

【 Mini 4WD Special Enlarged 】 This re-released version of Tamiya's legendary 1988 Avante buggy features the cool color scheme of the Mini 4WD Avante Black Special. It comes equipped with hybrid spike tires mounted on vivid fluorescent pink lightweight wheels to add to its eye-catching appearance.

【 Select Options Included 】 The shaft-driven 4WD chassis features carbon fiber upper/lower decks (2mm) and rear damper stay (3.5mm) which ensure superb strength. Front/rear ball differentials and center torque splitter help provide sure-footed traction. Racing steering set with 2mm thick carbon fiber plate offers linear steering response. 4-wheel double wishbone suspension with metal shafts allows a high degree of setting customization. Aluminum front knuckles feature the same shape as those on the original Avante and radius arm protector absorbs shocks to prevent damage to suspension arms. A total of 26 ball bearings contribute to a reduction in friction loss.

【 Specifications 】 ●Length: 420mm, Width: 240mm, Height: 140mm　●Wheelbase: 260mm　●Tread (F/R): 200mm　●Tire Width/Diameter: 32/88mm (Front), 40/88mm (Rear)　●2mm thick Carbon Fiber Double Deck Frame　●Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD　●(F/R) Ball Differentials & Center Torque Splitter　●3-Piece Steering Tie-Rod with 2mm thick Carbon Fiber Steering Plate　●4-Wheel Double Wishbone Suspension　●Oil dampers with metal cylinders　●Gear Ratio＝8.33:1　●25T Motor included　●Requires an Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●Expec GT-I 2.4G Radio Control System (Basic Set + ESC) ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 1, 2012.

Electric R/C Car Series No.4

XR311 Combat Support Vehicle

Item No：58004

【 Tamiya's First R/C Buggy 】 This is a re-release version of the 1/12 scale R/C XR311, Tamiya's first R/C model with a suspension system, which was originally released in 1977. While maintaining the basic layout of the original, this re-release version incorporates modern improvements. The injection-molded body captures the vehicle's purposeful look. Interior parts and a driver figure are included for even greater realism.

【 Refined Chassis Details 】 The 2WD duralumin chassis frame features a rear-mounted motor rear-wheel drive layout. The battery is positioned down the center of the chassis with the receiver and ESC on either side for exceptional balance. 4-wheel double wishbone suspension features upper and lower H-arms and adjustable metal torsion bar springs. Fully-enclosed gearbox may be assembled with one of three different gear ratios.

【 Specifications 】 ●1/12 Scale　●Length: 400mm, Width: 168mm, Height: 139mm ●Wheelbase: 256mm ●Weight: 1,800g　●Type 540 Motor ●Rear-Wheel Drive ●Tire Width/Diameter: (F/R) 29/77mm　●Tread (F/R): 138mm ●Duralumin Frame Chassis　●3-Bevel Differential ●2-piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension with Metal Torsion Bar Springs ●Gear Ratio=9.3:1, 16:1, 21:1

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 1, 2012.

1/10 Electric R/C Car Series No.510

Ferrari 599XX (TT-01 Type-E)

Item No：58510

【 Built for the Track 】 This is a 1/10 scale R/C assembly kit of the Ferrari 599XX, an extreme circuit-only machine incorporating a number of technologies taken from Ferrari's racing experience. The stylish long-nose, short-deck form of the 599XX has been accurately reproduced by the polycarbonate body. The C-pillar winglets, rear wing, and canards are also reproduced with polycarbonate parts. This exceptional machine is mounted on the fun-to-drive TT-01 Type-E chassis.

【 Evolved Chassis 】 The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. In addition, slick tires are mounted on gun metal mesh wheels.

【 Specifications 】 ●Length: 448mm, Width: 190mm, Height: 124mm　●Wheelbase: 257mm　●Tire Width/Diameter (F/R): 27/67mm　●Bathtub Type Chassis　●Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD　●F/R 3-Bevel Differentials　●3-Piece Steering Tie-Rod　●1-Wheel Double Wishbone Suspension　●F/R Friction Dampers　●Gear Ratio＝8.35:1　●Type 540 Motor　●Requires an Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 1, 2012.

1/12 Electric R/C Car Series No.512

Volkswagen Type 2 (T1) Wheelie

Item No：58512

【 This Bus Means Business 】 This R/C assembly kit depicts a 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Comical interpretation of the distinctive 23-window body style is reproduced with durable polycarbonate and an injection-molded driver figure is also included. Designed with a wheelie bar to enable fun, wheels in the air driving action.

【 Put Your Wheels in the Air! 】 WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.

【 Specifications 】 ●1/12 Scale　●Length: 345mm, Width: 270mm, Height: 270mm ●Wheelbase: 170mm ●Weight: 1,360g (not including R/C units and battery pack)　●Type 540 Motor ●Rear-Wheel Drive ●Tire Width/Diameter: (F/R) 113/70mm　●Tread: 265mm (Front), 270mm (Rear) ●Monocoque Frame Chassis　●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio=1:18.3

【 Separately Required Items 】 ●2-channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 1, 2012.

Limited Edition R/C Item

Nissan R91CP ('92 Daytona 24 Hours Winner)

Item No：84264

【 Daytona Samurai 】 The Nissan R91CP race car featured a sleek, aerodynamic form and was powered by a 3496cc twin-turbocharged V8 engine which produced an awesome 680hp. Driven by Japanese drivers Masahiro Hasemi, Kazuyoshi Hoshino, and Toshio Suzuki, it went on to win the 1992 24 Hours of Daytona race and in so doing also set a new race distance record of 4364.71km. Tamiya originally released a 1/10 scale R/C assembly kit of this famous machine in 1992 and it is making a comeback after two decades due to popular demand. The re-release version features the same chassis components as the 1992 original. The body is reproduced with durable polycarbonate while the side mirrors, windshield wiper, and induction pod are molded with separate parts. A driver figure is also included to enhance the model's presence.

【 3-Point Suspension 】 The ABS bathtub chassis incorporates resin space frames and a front FRP lower deck to give the chassis superb strength. Suspension features a front independent kingpin/coil spring and a rear 3-point setup with 1.5mm thick T-bar and CVA oil damper. Combined with high-grip sponge tires, it provides superb road-holding capability. In addition, ground clearance adjustment is possible for both the front and rear. A Direct-Drive 2WD system offers sharp throttle response and features a ball differential.

【 Specifications 】 ●Length: 480mm, Width: 204mm, Height: 109mm　●Wheelbase: 280mm　●Tread: 168mm (Front), 157mm (Rear)　●Tire Width/Diameter: 28/64mm (Front), 45/68mm (Rear)　●Bathtub Chassis with Front FRP Lower Deck　●Horizontally-Mounted Motor, Rear Direct-Drive 2WD　●Ball Differential　●2-Piece Steering Tie-Rod　●3-Point Suspension with Rear CVA Oil Damper　●Gear Ratio＝5.00:1　●Type 540 Motor　●Requires an Electronic Speed Controller (sold separately)

【 Separately Required Items 】 ●2-channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of Feburuary 1, 2012.

Tamiya Italeri Series No.11

1/48 Hawker Hurricane Mk.I w/3 Figures

Item No：37011

【 An Unsung Hero 】 The Hawker Hurricane was developed during the 1930s as Britain's first low-wing monoplane fighter and is considered a representative RAF fighter of WWII together with the Supermarine Spitfire. Its characteristic fabric-covered rear fuselage was rugged and simple to produce, and the Mk.I variant entered service from late-1937. Although Hurricanes were outperformed by the Luftwaffe's Messerschmitt Bf109s, the RAF used successful tactics which saw Spitfires engage Bf109s while the Hurricanes went after the bombers. Besides the British, the Hurricane was also used by a number of other countries, including Finland. About 15,000 Hurricanes of all types were produced in total and they served with distinction until the end of the war.

【 About the Model 】 ★1/48 scale plastic assembly kit model of the Hurricane Mk.I. Length: 198mm, Wingspan: 254mm. ★The robust form with fabric-covered rear fuselage has been accurately reproduced. ★Photo-etched parts highlight cockpit details. ★Cowlings may be detached to reveal the Merlin engine even after assembly. ★2 kinds of spinners and propellers included. ★2 pilot and 1 commander figures plus 6 marking options included. ★Comes with a Photographic Reference Manual (A5-size, 36 pages). ※Aircraft parts are product of Italeri.

1/12 Motorcycle Series No.2

Yamaha RZ250

Item No：14002

【 Yamaha's 2-Stroke Masterpiece 】 The Yamaha RZ250 was released for sale in the summer of 1980 and quickly became a best-seller in the 250cc-class of motorcycles. Its exciting styling and performance, which were in line with Yamaha's TZ bikes, made them very popular. Also like the TZ, the RZ250's 250cc 2-stroke, 2-cylinder engine was water-cooled and the bike was also equipped with Yamaha's unique monocross rear suspension.

【 About the Model 】 ★1/12 scale plastic assembly kit of the Yamaha RZ250. Length: 174mm, Width: 73mm, Height: 100mm. ★Semi-pneumatic synthetic rubber tires feature realistic tread patterns. ★Overall form including engine and radiator have been accurately reproduced. ★Vinyl tubing included to depict brake and meter cables, etc. ★High-quality Cartograf decals included for both a black and a white bike.

The information on this page is current as of February 2, 2012.

1/12 Motorcycle Series No.4

Yamaha RZ350

Item No：14004

【 Taking On the 750 】 The RZ350 debuted at the 1979 Paris Motor Show as the RD350LC and became available in Japan in 1981. This bike incorporated features which were developed from Yamaha's racing bikes, including a 347cc liquid-cooled 2-cylinder 45hp engine, front double disc brakes, and monocross rear suspension. Due to its high performance, which allowed it to take on larger 750cc displacement bikes, the bike was given the Japanese nickname "750-killer."

【 About the Model 】 ★1/12 scale plastic assembly kit of the Yamaha RZ350. Length: 174mm, Width: 73mm, Height: 100mm. ★All aspects of the bike, including its compact 2-stroke 2-cylinder engine and frame, have been accurately reproduced. ★Vinyl tubing included to depict brake and meter cables, etc. ★Parts for under-cowl and half fairing are also included to provide additional assembly options. ★Synthetic rubber tires feature realistic tread patterns. ★High-quality Cartograf decals included for both a black and a white bike.

The information on this page is current as of February 2, 2012.

1/24 Sports Car Series No.32

Honda Prelude XX

Item No：24032

【 The 2nd-Generation Honda Prelude 】 The 2nd-generation Honda Prelude was released in 1982 and the XX was this front-wheel drive coupe's highest trim level. It was powered by a 1,829cc 4-cylinder SOHC 125hp engine with three valves per cylinder and dual carburetors. It also featured a front double wishbone and rear strut 4-wheel independent suspension setup and the first 4-wheel anti-lock braking system on a Japanese car. The car's low, wedge-shaped body was highlighted by retractable headlights and a sunroof to offer even greater driving pleasure.

【 About the Model 】 ★1/24 scale plastic assembly kit of the Honda Prelude XX. ★The low, wide form of the car has been faithfully rendered. ★Horizontally-mounted SOHC engine features details such as carburetor, air cleaner, and transmission. Radiator, battery, and master cylinders also accurately reproduced. ★Hood may be detached to showcase the engine even after assembly. ★Detailed interior may be highlighted with decals for either a digial or analog instrument panel. ★Synthetic rubber tires feature realistic tread pattern.

The information on this page is current as of February 2, 2012.

1/24 Sports Car Series No.69

Honda City GG

Item No：24069

【 City Commuter 】 The 1st-generation Honda City was a phenomenon due to its intriguing "Tall Boy" body styling. The completely redesigned 2nd-generation City released in October 1986 featured its low, wide body design notable for its longer hood, short front and rear overhangs, as well as a generally flush body shape. The compact and efficient 76hp 1,237cc SOHC engine with four valves per cylinder was equivalent in performance to similar DOHC engines at the time. Front struts and rear rigid torsion beam suspension setups ensured that the car was quick on its feet as well. With a responsive engine and crisp handling characteristics, the 2nd-generation Honda City enjoyed wide popularity in Japan as a commuter vehicle.

【 About the Model 】 ★1/24 scale plastic assembly kit of the Honda City GG. Length: 149mm, Width: 81mm.
★Snap-Loc assembly requires no cement for assembly. ★The low, wide form of the compact car has been accurately reproduced. ★Parts for seats and dashboard give the interior a realistic appearance. ★Chassis undersurface also features suspension and muffler details. ★Synthetic rubber tires with realistic read patterns included.

The information on this page is current as of February 2, 2012.