Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Electric R/C Car Series No.661
1/14 R/C Buggyra Fat Fox (TT-01 Type-E)
Item No: 58661
★Here comes a new R/C racing truck - this model recreates the 2018 truck fielded by Buggyra Racing, champion of the 2017 season. ★A realistic polycarbonate body captures the sporty form of the truck, with stickers included to recreate the multitude of sponsor logos. ★The model is based upon the proven shaft-driven 4WD TT-01 Type-E chassis.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Electric R/C Car Series No.663
1/10 R/C Toyota Hilux Extra Cab (CC-01)
Item No: 58663
★This model recreates Toyota (GB) PLC's one-off tribute to Tamiya's legendary Bruiser! ★A polycarbonate body realistically depicts the 2-door extra cab form. ★The model is based upon the versatile CC-01 chassis, which provides powerful 4WD.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Electric R/C Car Series No.665
1/10 R/C TOYOTA GAZOO Racing TS050 Hybrid (F103GT)
Item No: 58665
This is an R/C model assembly kit recreating the 2018 iteration of the TS050 Hybrid, a car developed for racing by TOYOTA GAZOO Racing. A lightweight and durable polycarbonate body captures the aerodynamically honed form in style, with separate parts included to recreate nose, headlight cases, canards, rear wing and shark fin. Stickers are included in the kit to depict not only the numerous sponsor logos, but also parts of the livery’s red and black sections, and the model can be completed as car No.7 or No.8. The F103GT chassis gives a crisp drive and fuss free assembly.
★Length: 418mm, width: 188mm, height: 115mm. ★The F103GT chassis uses a direct drive 2WD setup transmitting power from the rear-mounted motor to the rear wheels. ★1.5mm upper and 2.5mm lower FRP decks make up the double-deck frame. ★Utilizes kingpin coil-sprung independent L/R front suspension. ★Front uprights feature 850 ball bearings and provide a caster angle of 3 degrees. ★Rear rigid suspension employs T-bar and friction damper. ★Motor mount allows adjustment of ground clearance setting. ★Comes with ball differential and grippy tires.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Special Edition R/C Product
1/10 R/C Super Astute (2018)
Item No: 47381
★This is a re-released and updated version of the 1991 release Super Astute. ★2.5mm FRP lower deck has been updated. ★Features a tweaked version of the Tamiya Traction Control (TTC) system which protects gears from impacts and give stable drive. ★4-wheel double wishbone suspension setup utilizes CVA oil dampers.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1486
TB-05 Carbon Front Damper Stay (for TRF Super Short Big Bore Dampers)
★This is a lightweight and rigid 3mm carbon fiber damper stay for use with TRF Super Short Big Bore Dampers. ★Features 6 different damper attachment holes for a finer array of setup options. ★Screws and ball connector nuts for attachment are included.
Compatible Chassis
TB-05 PRO Chassis
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1847
TB-05 Carbon Rear Damper Stay (for TRF Super Short Big Bore Dampers)
Item No: 54847
★This is a lightweight and rigid 3mm carbon fiber damper stay for use with TRF Super Short Big Bore Dampers. ★Features 7 different damper attachment holes for a finer array of setup options. ★Screws and ball connector nuts for attachment are included.
Compatible Chassis
TB-05 PRO Chassis
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1848
Aluminum Wing Washers (Black)
Item No: 54848
★Handy washers perfect for securing R/C touring car polycarbonate body wings. ★14mm diameter components also help lessen the risk of wing breakage in crashes. ★Comes with 3x8mm titanium screws.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1849
Aluminum Wing Washers (Blue)
Item No: 54849
★Handy washers perfect for securing R/C touring car polycarbonate body wings. ★14mm diameter components also help lessen the risk of wing breakage in crashes. ★Comes with 3x8mm titanium screws.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
TRF Series no.327
3x6mm Hi-Grade Aluminum Hex Head Screws (Blue, 5pcs.)
Item No: 42327
★Precision machined aluminum hex head screws help enable a smoother, highly secure build. ★Great for tasks such as attaching aluminum components to carbon fiber plate. ★Screws have a stylish blue anodized finish.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
TRF Series no.328
3x6mm Hi-Grade Aluminum Countersunk Hex Head Screws (Blue, 5pcs.)
Item No: 42328
★Precision machined aluminum countersunk hex head screws help enable a smoother, highly secure build. ★Great for tasks such as attaching aluminum components to carbon fiber plate. ★Screws have a stylish blue anodized finish.
Information is correct as of December 5, 2018. Specifications are subject to change without notice.
We have 626 guests online