TQ R/C & Hobbies

1/12 Big Scale Series No.32

1/12 Honda RA273 (w/Photo-Etched Parts)

Item No：12032

【 Honda's 3 Liter F1 Machine 】 In 1966, Formula 1 regulations were changed and indicated a move from cars with 1.5 liter engines to those with 3 liter ones. Having finally tasted success with the 1.5 liter RA272 the year before, the green Honda engineers unfortunately had to start from scratch again, and the RA273 was not ready until the Italian GP in the 1966. Featuring a lightweight monocoque frame with aluminum panels and powered by a 90 degree V-12 engine, the car was driven by Richie Ginther and John Surtees, with Ginther finishing the season in a respectable 4th place overall.

【 About the Model 】 ★Length: 333mm, Width: 143mm, Height: 70mm ★Meticulously detailed V-12 engine features fuel pipes and ignition cables. The 12 exhaust funnels are made from shaved aluminum. ★Fully-movable front and rear suspensions are equipped with metal coil springs for life-like operation. ★Moving the steering wheel actually turns the front wheels. ★Nose cowling can be attached and removed even after assembly to display radiator and water tank. ★Extensive set of photo-etched parts, including brake discs, oil cooler, and steering wheel spokes are included for the ultimate finish. ★Manufacturer emblems, mirror surfaces, and instrument panel depicted with metal transfers. ★Hollow rubber tires with accurate tread patterns add to the model's racing feel. ★1 driver figure included. ★3 types of markings included to depict cars driven by Richie Ginther and John Surtees.

The information on this page is current as of June 15, 2015. Specifications are subject to change without notice.

1/700 Limited Edition Scale Model

1/700 U.S. Navy Aircraft Carrier CV-3 Saratoga (w/Pontos Model Detail Up Parts)

Item No: 25179

★Tamiya's Water Line Series model of the death-defying USS Saratoga (which survived WWII against the odds) is given a limited edition release with a comprehensive detail-up parts set to take it to new heights. ★Includes a staggering 4 sheets of photo-etched parts to recreate - among others - anti-aircraft ordnance, bridge radar etc. Brass parts depict components such as 5-inch gun barrels and the mast with unerring precision, while the set also comes with a wooden effect deck sheet plus dry decals.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Mini 4WD PRO Series No.41

Shooting Proud Star (MA Chassis)

Item No:18641

★The latest addition to the Mini 4WD PRO line-up is this exciting machine which also currently appears in the cartoon "Hyper-Dash! Yonkuro" in popular Japanese comic CoroCoro Aniki. ★The stylish form of the car features a rapier-like long and thin canopy with complex rear end shaping, and takes inspiration from the classis Dash-3 Emperor model from the Mini 4WD back catalog. ★The model uses the midship layout, aerodynamically-efficient MA chassis with double shaft motor.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Mini 4WD Product

HG Lightweight 19mm Aluminum Ball-Race Rollers (Ringless/Pink)

Item No：95213

These lightweight 19mm rollers are made entirely from aluminum, finished in a vibrant pink. They feature 6 weight-saving holes (that comes to a 30% weight reduction), and each roller has a built-in 520 ball bearing for supremely smooth rotation. The set includes 2 rollers, plus screws and spacers for use when attaching.
★Compatible with: Mini 4WD, Mini 4WD PRO cars. Some bodies may require modification.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Brake Set (for AR Chassis) (Purple)

Item No：95214

★The brake set is a must-have item for racers who are aiming at the podium in official contests. The brake sponge comes pre-cut in 5mm widths, and 2 different frictions of sponge are included. ★The brake can be applied to the front or rear of the car, and is compatible with both small- and large-diameter wheels/tires.

★Compatible with: MA, AR and Super-II Chassis.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Low Friction Front Under Guard (Purple)

Item No：95215

★Stop your machine from flying over the fence after it lands from jumps, by installing this front under guard. ★Can be used with normal or wide roller settings, and small or large diameter tires. ★Finished in an attractive shade of purple.

★Compatible with: MA, MS, AR, VS, Super-II and Super XX Chassis.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Mini 4WD Carry Pit

Item No：95221

★This case has the storage volume to take everything you need for that important race event! Its interior is divided into 2 separate compartments, with space enough for Mini 4WD machines, parts cases, etc. ★The top lid of the carry pit doubles as a handy and space-efficient pit board.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Avante Mk.III Japan Cup 2015 Limited Edition

Item No：95087

The Symbol of Your Mini 4WD Summer
This assembly kit creates a limited edition version of the Avante Mk.III Mini 4WD racer, with a vivid and tough ABS body molded in the same magenta color chosen to represent the Japan Cup 2015. Newly-desgined metallic stickers have been included to decorate the body, which is mounted on the super-efficient MA chassis molded in a fetching shade of blue and with violet A parts. With yellow 5-spoke wheels and super hard low-profile tires (with white lettering) rounding off the car, this model will catch your attention just like the Japan Cup 2015!

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike

Specifications
★Length: 156mm ★Width: 97mm ★Height: 41mm ★Includes double-shaft motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of June 15, 2015. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Hyper-Dash 3 Motor J-Cup 2015 Special

Item No：95084

★This limited edition item is released to commemorate the 2015 Japan Cup. ★It features a specially-designed red metallic colored label, plus a matching red end bell. ★Utilizes silver carbon brushes.

★Compatible with: Mini 4WD cars and Dangun racers.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Hyper-Dash Motor PRO J-Cup 2015 Special

Item No：95085

★This limited edition version of the high-performance Hyper-Dash Motor PRO is released to commemorate the 2015 Japan Cup, and features that event's name on its label and packaging. ★Utilizes highly-efficient and durable silver carbon brushes.

★Compatible with: Mini 4WD cars and Dangun racers.

Information is correct as of June 5, 2015. Specifications are subject to change without notice.