Electric R/C Car Series No.646
Konghead 6x6 (G6-01 Chassis)
Item No: 58646
★The Konghead 6x6 is a new 6-wheel drive model with great off-road skills. ★It runs on the G6-01 chassis, which employs an efficient gear-driven drivetrain housed in a durable slimline monocoque. ★A realistic polycarbonate body comes with metal-plated air cleaner and muffler parts. ★Colorful marking stickers are included to decorate the model.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Limited Edition R/C Product
1/10 R/C Top-Force (2017)
Item No: 47350
Re-release of a Commemorative Model
The Top-Force was originally produced in 1991 to mark Tamiya's 100th R/C product release. Lessons learned in actual races were incorporated into this buggy, including features such as the low, wedge-shaped body, large rear wing with built-in flaps, and underbody cowling. Square spike tires give the Top-Force excellent traction on any surface.
Race-Ready Off-Road Buggy
The simple and practical FRP double deck frame sees components mounted on the lower deck for a low center of gravity. Both front and rear gearboxes are equipped with precision-made ball differentials, which give limited slip diff. effect and provide awesome cornering ability. Hard propeller shaft and universal shafts increase power transmission efficiency for faster lap times. The suspension system features adjustable upper arms that allow camber angle customization and metal bearings in the steering arms ensure sharp steering response.
Specifications
●Length: 400mm ●Width: 249mm ●Height: 187mm ●Wheelbase: 270mm ●Tread: (Front) 217mm, (Rear) 205mm ●Minimum Ground Clearance: 32mm ●Tire Width/Diameter: (Front) 32/82mm, (Rear) 41/82mm ●2mm FRP Double Deck Frame ●Shaft-Driven 4WD ●Front/Rear Ball Differentials ●3-Piece Steering Tie Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio: 8.59 (Standard) ●Type 540 Motor ●Electronic Speed Controller
Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter
Information is correct as of June 5, 2017. Specifications are subject to change without notice.
Limited Edition R/C Product
1/10 R/C Dual Ridge Black Metallic (TT-02B Chassis)
Item No: 47355
★This is a special version of the futuristically-styled Dual Ridge buggy. ★Both body and rear wing come with a black metal-plated finish, and pre-cut. Simply apply the dedicated stickers, and they are ready! ★Semi-gloss chrome metallic wheels and white CVA oil dampers add a stylish accent.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Limited Edition R/C Product
1/10 R/C Tyrrell P34 Six Wheeler 1976 Japan GP Special Edition
Item No: 47359
★This is an R/C model assembly kit of the legendary 6-wheeled Tyrrell P34 as it appeared in the 1976 Japan GP. ★It uses a specially-modified 6-wheel version of the F103 chassis, equipped with torque-tuned motor, TRF damper, sponge tires and other hi-spec Hop-Up Option parts. ★Superb realism is provided by the polycarbonate body, with depictions of the V8 engine, rear wing and more!
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Masterwork Collection No.157
1/24 NSX (Red) (Finished Model)
Item No: 21157
A Modern Masterpiece
2015 was an auspicious year for NSX aficionados, as the legendary car's 25th anniversary was marked with the announcement of the new second generation production NSX at the Detroit Auto Show. It went on sale to great acclaim in August of 2016. An exceptionally lightweight body utilizes aluminum, high strength steel and carbon fiber components, while power is provided by a midship 3.5-liter V6 twin turbo engine in harmony with a 9-speed dual clutch transmission. The ground-breaking hybrid system orchestrates three electric motors for maximum control of all four wheels and outstanding cornering.
About the Model
★This is a factory finished 1/24 scale plastic model recreating the NSX. ★The alluring, aerodynamically-honed form of the NSX is recreated with superb accuracy. ★A combination of metal-plated and clear parts depict head- and taillights. ★Features authentic cockpit interior depiction. ★Mirror surfaces and emblems are recreated using metal transfers. ★The body is given a beautiful red paint job, with washes to accent panel lines. ★Brake caliper parts are painted in black. ★Comes on a stand with name plate and clear case.
Information is correct as of June 23, 2017. Specifications are subject to change without notice.
Detail Up Parts Series Nos.75-78
Cable (0.5mm Outer Diameter/Black)
Item No: 12675
★This versatile black cable can be used to recreate piping, cable and much more on car (1/12, 1/20 & 1/24) and bike (1/6 & 1/12) models. ★Wire in the cable ensures that it is pliant and easy to use in modelling. ★Four different thicknesses are available to suit your needs. ★Each Item contains a 2-meter length of cable.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Detail Up Parts Series Nos.75-78
Cable (0.65mm Outer Diameter/Black)
Item No: 12676
★This versatile black cable can be used to recreate piping, cable and much more on car (1/12, 1/20 & 1/24) and bike (1/6 & 1/12) models. ★Wire in the cable ensures that it is pliant and easy to use in modelling. ★Four different thicknesses are available to suit your needs. ★Each Item contains a 2-meter length of cable.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Detail Up Parts Series Nos.75-78
Cable (0.8mm Outer Diameter/Black)
Item No: 12677
★This versatile black cable can be used to recreate piping, cable and much more on car (1/12, 1/20 & 1/24) and bike (1/6 & 1/12) models. ★Wire in the cable ensures that it is pliant and easy to use in modelling. ★Four different thicknesses are available to suit your needs. ★Each Item contains a 2-meter length of cable.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
Detail Up Parts Series Nos.75-78
Cable (1.0mm Outer Diameter/Black)
Item No: 12678
★This versatile black cable can be used to recreate piping, cable and much more on car (1/12, 1/20 & 1/24) and bike (1/6 & 1/12) models. ★Wire in the cable ensures that it is pliant and easy to use in modelling. ★Four different thicknesses are available to suit your needs. ★Each Item contains a 2-meter length of cable.
Information is correct as of June 2, 2017. Specifications are subject to change without notice.
1/35 Military Miniature Series No.66
KV-1 (Type-C) Russian Heavy Tank
Item No: 35066
A Stalwart
This is a 1/35 scale plastic model assembly kit recreating the KV-1 (Type-C), which faced off against formidable German armor in WWII. The heavily-armored KV-1 form with 76.2mm gun is accurately recreated, with moving depictions of the turret plus main and machine guns. Modelers can choose whether to assemble the kit with driver and commander hatches open or closed. Markings are included to recreate a number of different turret slogans, as is a commander torso figure.
Information is correct as of June 7, 2017. Specifications are subject to change without notice.
We have 636 guests online