TQ R/C & Hobbies

Star Unit Series No.9

1/24 R/C Lunch Box Mini

(Assembly Kit) (SW-01)

Item No: 57409

Small yet perfectly formed
The Lunch Box is a famous name in Tamiya R/C and Mini 4WD, delighting many a hobbyist over the years. Now, it is here in brand new mini 1/24 form, as a fascinating R/C model assembly kit! While extremely compact, it is endowed with excellent mechanical design: gear driven 4WD, strut suspension and more! The lightweight polycarbonate body comes pre-painted in yellow, with wheel arches pre-cut and body mount holes already made. Stickers are included to decorate the body.

SW-01: Super-Compact 4WD
190mm long and 150mm wide, the SW-01 is a compact, highly fun 4WD chassis. A Type 370 motor is central in the slim monocoque frame, with gears transmitting its output to the front and rear of the model, where 70mm tires translate it into a powerful drive. The chassis power source is mounted in the top section to allow wild wheelies under acceleration. Strut type 4-wheel independent coil sprung suspension utilizes single piece upper arms to link left and right wheel steering motion, helping suppress roll during turns, and together with front and rear differentials realize a tight turning circle.

Specifications
★Length: 190mm, Width: 150mm, Height: 140mm ★Wheelbase: 92mm　 ★Tread: 122mm (Front/Rear) ★Tire Width/Diameter: 28/70mm (Front/Rear) ★Monocoque Frame ★Gear-Driven 4WD ★Planetary Gear Differentials ★3-Piece Steering Tie-Rod ★Suspension: MacPherson Strut ★Gear Ratio = 21.88:1 ★Type 370 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source

Information is correct as of July 9, 2019. Specifications are subject to change without notice.

Electric R/C Car Series No.671

1/10 MAZDA3 (TT-02)

Item No: 58671

New Star
This R/C model assembly kit depicts the MAZDA3, which was unveiled to the public at the 2018 LA Auto Show. Its elegant form is largely inspired by the Mazda Kai Concept car exhibited in 2017 at the Tokyo Motor Show. The flowing 5-door fastback body is recreated in lightweight and durable polycarbonate, with stickers recreating front grille, headlights, signature wing and more. Masking stickers are provided in the kit to aid with the paint job. This kit runs on the proven TT-02 chassis, which has a hard lower deck component molded in red. Tamiya logo stickers are also included.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. 10-spoke wheels are paired with tread-patterned racing radial tires.

Specifications
★Length: 436mm, Width: 187mm, Height: 137mm ★Wheelbase: 257mm　★Tire Width/Diameter: 26/66mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is correct as of July 11, 2019. Specifications are subject to change without notice.

Electric R/C Series No.667

1/10 Audi quattro Rallye A2 (TT-02)

Item No: 58667

A Giant of the Rally World
The Audi quattro is a true rallying legend that was a pioneer of 4WD rally technology. This is an R/C model assembly kit recreating the Audi quattro Rallye A2, the car which debuted in 1983. It features an accurate polycarbonate body recreating the 2-door form, with separate parts for side mirrors, rear wing and light cases. The adaptable TT-02 chassis provides the base, with 5-spoke wheels and tread patterned tires.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. 5-spoke wheels are paired with tread-patterned tires.

Specifications
★Length: 458mm, Width: 187mm, Height: 135mm ★Wheelbase: 257mm　★Tire Width/Diameter: 26/66mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-Channel R/C Unit with ESC ★Battery Pack & Charger ★R6/AA/UM3 batteries for transmitter

Information is correct as of June 25, 2019. Specifications are subject to change without notice.

Electric R/C Car Series No.668

1/10 Volkswagen Type 2 (T1) (M-06)

Item No: 58668

A True Legend
This R/C model assembly kit recreates the “23-window” type of the much-loved first generation (T1) Volkswagen Type 2, known as the Volkswagen Bus to many of its legions of fans, with an accurate polycarbonate body in detailed 1/10 scale. Combined with classic style wheels and tread patterned tires, it is mounted on the rear-wheel drive M-06 chassis.

Great RR Performance from the M-06
The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. A large bumper is included.

Specifications
★Length: 426mm, Width: 195mm, Height: 177mm ★Wheelbase: 239mm ★Tread (F/R): 138mm ★Rear-Motor, Rear-Wheel Drive ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio = 5.8:1 ★Tire Width/Diameter (F/R): 25mm/59mm ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is correct as of June 25, 2019. Specifications are subject to change without notice.

1/16 R/C Tank Series No.43

U.S. Airborne Tank M551 Sheridan Full-Option Kit

Item No: 56043

A Veteran Campaigner
The lightweight M551 Sheridan was designed as an airliftable tank, a cutting-edge design with aluminum alloy hull and powerful 152mm gun/launcher. Work began on it in 1959, and it was officially adopted in May 1966, with 1,600 produced by November 1970. Its first taste of live action came in the Vietnam War, fulfilling both shelling and offensive roles in a punishing environment, and it would also go on to serve in Panama and the Gulf War conflict. It remained in service with combat units until 1996, and was not withdrawn completely until 2004.

Specifications
★Length: 408mm, width: 186mm. Weight (approx.): 2,500g. ★Speaker unit emits highly authentic sounds in time with model actions. ★Includes Control Unit.

Separately Required Items
★4-channel transmitter ★Battery pack and charger ★Batteries for transmitter

Information is correct as of July 3, 2019. Specifications are subject to change without notice.

Hop-Up Options no.1860

T3-01 Type 370 Sport-Tuned Motor

Item No: 54860

★This tuned motor is perfect for use with the R/C Dancing Rider, and offers dynamic drive. ★Input voltage: 6.6-7.2V ★RPM: 22,200 (at 7.2V) ★Maximum torque: 4.91mN-m ★Maximum usage: 2.85A

Compatible Chassis
T3-01 Chassis

Information is current as of June 5, 2019. Specifications are subject to change without notice.

Hop-Up Options no.1871

Reinforced V Parts for TRF Dampers

Item No: 54871

★These components for TRF dampers are molded in a different plastic and feature updated designs. ★Contains four types of damper end (5mm S, M; 5.8mm S, M), two types of damper top (5mm & 5.8mm), plus two types of spring retainer (S, M) ★Parts facilitate fine setting adjustments.

Information is current as of June 5, 2019. Specifications are subject to change without notice.

Hop-Up Options no.1877

T3-01 Aluminum Motor Mount

Item No: 54877

★This precision aluminum motor mount gives secure motor attachment, and has heat sink effect. ★Mount features a stylish blue anodized finish.

Compatible Chassis
T3-01 Chassis

Information is current as of June 5, 2019. Specifications are subject to change without notice.

Hop-Up Options no.1878

Upgrade Set for TRF Super Short Big Bore Dampers

Item No: 54878

★5.8mm ball connectors, reinforced V parts, and dedicated damper caps allow new setups, also reinforcing and optimizing dampers.

Specifications are subject to change without notice.

Hop-Up Options no.1894

Tamiya Brushless Motor 02 (Sensored) 17.5T

Item No: 54894

★This sensored brushless 17.5T motor provides smooth operation at both low and high speeds. ★An internal sensor's positional feedback is combined with the ESC's RPM data to offer a high level of control. ★Brushless design makes for long motor life and reduced maintenance. ★Motor timing is adjustable. ★Use with Tamiya Brushless ESCs TBLE-01S, TBLE-02S and TBLE-03S. ★Use of Item 53508 or 42172 is recommended. ★KV rating: 2,200KV (at second timing increment) ★Input voltage: 6.6V - 7.2V ★Weight (includes cables): 185g

Compatible Models
1/10 Tamiya touring cars, M-Chassis, F103, F104 chassis and Buggy cars (excluding some re-issued kits)

Information is current as of June 5, 2019. Specifications are subject to change without notice.