TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Ford Bronco 2021 (CC-02)

Saturday, 02 July 2022 16:19 Published in Tamiya

Electric R/C Car Series no.705

Ford Bronco 2021 (CC-02)

Item No: 58705

Mine's a Bronco!
This R/C model assembly kit depicts a 2-door model of the Ford Bronco 2021, and features a realistic polycarbonate body that artfully depicts the car, with classic Bronco features such as the rounded headlights, oblong taillights and front fender-top indentations. Also included are separate parts for recreating a roof rack, the front grille, mirrors, spare tire covers and more. Front and rear light cases are plated parts, and can be fitted with separately sold LEDs.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black twelve-spoke wheels and grippy block pattern tires.

Specifications
★Length: 447mm, width: 204mm, height: 233mm ★Wheelbase: 252mm ★Tread: 164mm (front), 167mm (rear) ★Tire width/diameter: 36/94mm (front & rear) ★Ladder frame ★Longitudinal motor, shaft-driven 4WD ★3-bevel differential gears ★4-link rigid suspension (front & rear) ★Gear ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of May 26, 2022. Specifications are subject to change without notice.

XV-02 PRO Chassis Kit

Saturday, 02 July 2022 16:16 Published in Tamiya

Electric R/C Car Series no.707

XV-02 PRO Chassis Kit

Item No: 58707

X-Ceptional!
This shaft-driven 4WD chassis kit features a front midship motor and transmits power from the spur gear in the center via identical length front and rear long propeller shafts, which allows running on surfaces from on-road to flat dirt. 39T differential gears front and rear, and one setup option 40T differential gear are included, facilitating changes to drive balance. It features optimum balance and a slim chassis, plus 4-wheel independent double wishbone suspension with aluminum-cylinder long oil dampers.

Featured Components
Drivetrain: ●Full ball bearings ●Aluminum propeller shafts (front/rear) ●Oil-filled gear differentials (front/rear, two 39T and one 40T included) ●Universal drive shafts (front/rear)
Suspension: ●Aluminum long dampers (front/rear, with blue caps) ●6-degree caster blocks ●Turnbuckle shaft upper arms
Chassis: ●Front bumper with skid angle ●Polycarbonate chassis cover ●Aluminum servo mount ●Hi-torque servo saver

Specifications
★Length: 368mm, width: 180mm ★Wheelbase: 257mm ★Bathtub frame ★Front-midship motor, shaft-driven 4WD ★Oil-filled gear differentials ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★Long oil dampers with aluminum cylinders ★Gear ratio (with kit-standard 19T pinion) = 9.58:1 (14 ratios between 10.71:1 and 6.28:1 possible with separately sold pinions) ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★Body ★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of March 30, 2022. Specifications are subject to change without notice.

1/10 R/C Alpine A110 Jägermeister 1973 (M-06)

Saturday, 02 July 2022 16:14 Published in Tamiya

Electric R/C Car Series no.708

1/10 R/C Alpine A110 Jägermeister 1973 (M-06)

Item No: 58708

A Class Act
The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained motor racing fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first world rally champion and its Jägermeister orange version achieved a class victory in German circuit races. This is an R/C model assembly kit of such an Alpine A110, its polycarbonate body realistically capturing the distinctive 2-door coupe form in style. Stickers are included to recreate sponsor logos, race numbers and more. The model uses the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rear-mounted motor.

Great RR Performance from the M-06
The M-06 chassis features a rear-mounted motor, rear-drive setup and has a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses dish design wheels, equipped with 60D radial tires at the front and 60D super radial (hard) tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.

Specifications
★Length: 395mm, width: 168mm, height: 121mm ★Wheelbase: 210mm ★Tread (front/rear): 138mm ★Rear-motor, rear-wheel drive ★3-bevel differential gear ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 5.8:1 (using kit-standard 20T pinion) ★Tire width/diameter (front/rear): 25mm/59mm ★Type 540 motor ★Requires an Electronic Speed Controller (sold separately)

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of April 26, 2022. Specifications are subject to change without notice.

Special Edition R/C Product

1/10 R/C 1990 Land Rover Defender 90
(Light Blue Painted Body) (CC-02)

Item No: 47478

Land Rover Legend
Loved by millions across the world for its superb 4WD performance and distincive functional form, the Land Rover Defender had a long production run from 1948 until 2016. This R/C model assembly kit recreates the short wheelbase Defender 90 variant from 1990, with the unmistakeable form captured by a polycarbonate body that is pre-painted in light blue with a white roof, and features front and rear light cases which are compatible with separately sold LEDs. Separate molded parts are included to depict features such as the outer roll cage, front grille and spare tire cover. The CC-02 chassis is a great base, providing a sure-footed drive whether on-road or off.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black six-spoke wheels and grippy block pattern tires. In this kit, the chassis is assembled with a 242mm wheelbase.

Specifications
★Length: 429mm, width: 200mm, height: 215mm ★Wheelbase: 242mm ★Tread: 160mm (front), 163mm (rear) ★Tire width/diameter: 33/90mm (front/rear) ★Ladder frame ★Longitudinal motor, shaft-driven 4WD ★3-bevel differential gears ★4-link rigid suspension (front/rear) ★Gear ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of May 17, 2022. Specifications are subject to change without notice.

1/10 R/C Astute 2022 (Painted Body) (TD2)

Saturday, 02 July 2022 16:08 Published in Tamiya

Special Edition R/C Product

1/10 R/C Astute 2022 (Painted Body) (TD2)

Item No: 47482

Truly Awesome!
This 2WD R/C off-road assembly kit buggy inherits its name from the 1980s Tamiya R/C rear-wheel drive model "Astute." The low-profile, sleek polycarbonate body is designed by Kota Nezu of znug design; it comes pre-cut and pre-painted in red, as are the mini fenders. The model features a driver figure (unpainted) for the cockpit. Two types (high/low) of wing stays are included to adjust downforce. Based on a monocoque frame chassis with midship motor and battery pack position toward the rear, the Astute 2022 utilizes front ribbed and rear square spike tires.

TD2 - Superbly Balanced RWD
The TD2 is a rear-wheel drive buggy chassis which employs front inboard suspension for slim, low-profile form, and a monocoque frame with optimum R/C equipment layout. It features a midship transverse motor and transverse battery pack positioned to the rear. The sealed gearbox has a built-in ball differential to limit slip and 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shafts for use as upper arms facilitate camber angle adjustment. Front suspension has a skid angle of 25 degrees and angled dampers for smooth performance. Ribbed front and rear square spike tires facilitate stability and great grip. Front wheels are attached by hex hubs.

Specifications
★Length: 387mm, width: 246mm, height: 125mm (with low wing stays employed) ★Wheelbase: 284mm ★Tread: 215mm (front), 205mm (rear) ★Plastic bathtub frame ★Rear-wheel drive ★Ball differential ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Tire width/diameter: 27/79mm (front), 41/82mm (rear) ★CVA oil dampers ★Gear Ratio = 10.71:1 ★Full ball bearings ★Type 540 motor and Electronic Speed Controller (ESC) are sold separately.

Separately Required Items
★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of April 28, 2022. Specifications are subject to change without notice.

1/10 R/C Tyrrell P34 Six Wheeler 1977 Argentine GP

Saturday, 02 July 2022 16:05 Published in Tamiya

Special Edition R/C Product

1/10 R/C Tyrrell P34 Six Wheeler 1977 Argentine GP

Item No: 47486

Hit for Six
1976 saw the dawn of the P34, Tyrrell's wonderfully inventive six-wheeled car with four smaller front wheels, that backed up its looks with solid results such as an impressive one-two finish for the team at the 1976 Swedish GP. At the 1977 season-opening Argentine GP, the P34 had a fully-cowled body adorned with a blue and white livery and First National City bank as a sponsor; that car is recreated by this 1/10 scale R/C model assembly kit. The body is injection molded in detailed yet durable plastic, with upper cowl sections molded in white and side pontoons in blue. Stickers are included for depiction of either of Peterson's number 3 or Depailler's number 4 cars, complete with Goodyear tire logos - just apply the stickers, and the body is ready!

Special 6-Wheeled F103 Chassis
The high performance direct drive 2WD chassis utilizes a semi double deck frame with 1.5mm thick upper and 2.5mm thick lower FRP plates. Kingpin coil spring 4-wheel independent front suspension consists of the one-piece lower arm and individual left/right upper arms. One servo controls the steering of all four front wheels. The rear suspension features a rigid T-bar with coil spring and low-friction pads. The spur gear has a built-in ball diff for limited slip effect. Grippy sponge tires masterfully harness the power provided by the motor.

Specifications
★Length: 433mm, width: 200mm, height: 108mm ★Tread: 140mm (front), 155mm (rear) ★Tire width/diameter: 23/44mm (front), 45/64mm (rear) ★FRP semi-double deck frame ★Direct drive RWD ★Ball differential ★2-piece steering tie-rod ★Suspension: front king pin coil spring, rear T-bar rigid ★Gear ratio = 4.5:1 (using 14T pinion/63T spur combination) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-Channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of May 14, 2022. Specifications are subject to change without notice.

XV-02/TT-02 Ball Differential Set (39T)

Saturday, 02 July 2022 16:03 Published in Tamiya

Hop-Up Options no.2046

XV-02/TT-02 Ball Differential Set (39T)

Item No: 22046

★Used in place of the kit standard gear differential, this product is particularly useful on the rear, giving stable grip. ★Holes for the 3mm balls are designed to help keep them well greased. ★Contains 39T ring gear, bevel pinion gears, diff joints, balls, plus 850 and 1280 size ball bearings. ★The image at right shows an assembled example.

Compatible Chassis
TT-02*1, TT-02D*1, TT-02 Type-S*1 & XV-02 PRO Chassis
*1: Use with Items 54623, 51700, and 51444.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of June 15, 2022. Specifications are subject to change without notice.

XV-02/TT-02 Front Direct Coupling Set (39T)

Saturday, 02 July 2022 16:01 Published in Tamiya

Hop-Up Options no.2047

XV-02/TT-02 Front Direct Coupling Set (39T)

Item No: 22047

★Used in place of the standard gear differential, this front direct coupling improves initial acceleration and makes your car more stable on the brakes. ★The set includes 39T ring gear, bevel pinion gears, aluminum front direct couplings, joint cups and more. ★The image at right shows an assembled example.

Compatible Chassis

TT-02*1, TT-02D*1, TT-02 Type-S*1 & XV-02 PRO Chassis
*1: Use with Items 54623, 51700, and 51444.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of June 15, 2022. Specifications are subject to change without notice.

XV-02 Slipper Clutch Set

Saturday, 02 July 2022 15:59 Published in Tamiya

Hop-Up Options no.2048

XV-02 Slipper Clutch Set

Item No: 22048

★Used in place of kit standard spur gear, this slipper clutch protects gears from sudden surges and helps compensate for low grip.

Compatible Chassis
XV-02 PRO Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of June 24, 2022. Specifications are subject to change without notice.

XV-02/TT-02 Oil Gear Differential Unit

Saturday, 02 July 2022 15:57 Published in Tamiya

Hop-Up Options no.2049

XV-02/TT-02 Oil Gear Differential Unit

Item No: 22049

★This efficient gear differential uses TRF419 design gears, steel diff joints and aluminum cross shafts. ★Fine-tune setup by using different oil viscosities. ★Use it with separately sold Item 22050 for a center differential effect. ★The image at right shows an assembled example.

Compatible Chassis
TT-02*1, TT-02D*1, TT-02 Type-S*1 & XV-02 PRO Chassis
*1: Use with Items 54623, 51700, and 51444.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of June 15, 2022. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  Next 
  •  End 
  • »
Page 1 of 4

Social sharing

Who's Online

We have 147 guests online