Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Hop-Up Options no.1998
CC-02 Carbon Steel Propeller Shaft (75mm)
Item No: 54998
★Used in place of a kit standard plastic propeller shaft, this component is carbon steel for minimal twisting and power loss. ★The shaft adapt telescopically as the suspension moves, ensuring that your model retains efficient drive. ★Two are required to fully kit out the CC-02 chassis.
Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of May 20, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2003
TA08 Stabilizer Set (Front & Rear)
Item No: 22003
★Stabilizers are a key component in fine-tuning your suspension setup to the course layout and car spec, adjusting roll. ★Bearings ensure smooth motion, and adjuster rods and stabilizer rod stopper help with minute adjustments to left/right balance. ★Two different rigidity bars are included for both front and rear (super-soft: green marker; soft: red marker).
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2004
TA08 Aluminum Servo Mount
Item No: 22004
★This is a one-piece aluminum servo mount that promises to boost servo stay rigidity and sharpen your car's handling. ★It has a stylish blue anodized finish, and features the TAMIYA logo laser-engraved on the top. ★Features three servo attachment holes. ★The image at right shows an example of attachment, with Item 22005 TA08 Carbon Damper Stays (Front & Rear)
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2005
TA08 Carbon Damper Stays (Front & Rear)
Item No: 22005
★These damper stays for Super Short Big Bore Dampers were included in the TA08 PRO chassis kit. ★Crafted in 3mm thick carbon fiber material, they are highly rigid and maintain shape well, helping get the most out of your dampers. ★The stays feature four front and five rear damper attachment holes to let you really fine-tune your setup.
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Special Edition R/C Product
TA08 PRO Titanium Screw Set
Item No: 47476
★Lighten and strengthen your TA08 PRO chassis with this comprehensive set of titanium screws (92 are included), that promises a weight savibgs of around 20 grams. ★Includes the following standard screws: six 3x5mm; ten 3x6mm; twenty-seven 3x8mm; six 3x10mm; four each of 3x12mm and 3x14mm; and two each of 3x16mm and 3x18mm types. ★Also included are the following countersunk head screws: six 3x6mm; sixteen 3x8mm; five 3x10mm; and four 3x16mm types.
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Spare Parts no.1667
TA08 06 Module Spur Gear (71T)
Item No: 51667
★Replace parts as they show signs of wear and tear, to keep your model in peak condition!
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Spare Parts no.1668
TA08 04 Module Spur Gear (110T)
Item No: 51668
★ Replace parts as they show signs of wear and tear, to keep your model in peak condition!
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Spare Parts no.1669
TA08 D Parts (Suspension Arms) 2pcs.
Item No: 51669
★ Replace parts as they show signs of wear and tear, to keep your model in peak condition!
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Spare Parts no.1670
TA08 Front Belt (132T)
Item No: 51670
★ Replace parts as they show signs of wear and tear, to keep your model in peak condition!
Information is current as of May 7, 2021. Specifications are subject to change without notice.
Spare Parts no.1671
TA08 Rear Belt (101T)
Item No: 51671
★ Replace parts as they show signs of wear and tear, to keep your model in peak condition!
Information is current as of May 7, 2021. Specifications are subject to change without notice.
We have 373 guests online