TQ R/C & Hobbies

Mini 4WD Limited Edition

HG Carbon Rear Stay

Item No：94744

★Lightweight 3mm thick rear carbon stay. ★13mm and 19mm rollers can be installed onto the plate for a wide setting. ★Can be used with any setting stay for wider range of setting possibilities.

Information and specifications coming soon.

Mini 4WD Limited Edition

HG Carbon Multi Roller Setting Stay

Item No：94738

★Lightweight 3mm thick carbon stay. ★9mm, 13mm, 19mm rollers can be installed onto the plate for a wide setting. Can be installed on any Mini 4WD machine's front or rear bumper. ★Can be used with any setting stay.

Information and specifications coming soon.

Limited Edition R/C Parts

Die-Cast Metal Tracks For 1/16 Scale R/C Tiger I

Item No：84127

★These die-cast metal tracks feature highly detailed track patterns which have a sand-blasted finish. ★These heavy tracks provide your R/C tank model with realistic sag effects for an enhanced realism.

Information and specifications coming soon.

Limited Edition R/C Parts

Die-Cast Metal Tracks For 1/16 Scale R/C Panther

Item No：84129

★These die-cast metal tracks feature highly detailed track patterns which have a sand-blasted finish. ★These heavy tracks provide your R/C tank model with realistic sag effects for an enhanced realism.

Information and specifications coming soon.

Limited Edition R/C Parts

Die-Cast Metal Tracks For 1/16 Scale R/C King Tiger

Item No：84128

★These die-cast metal tracks feature highly detailed track patterns which have a sand-blasted finish. ★These heavy tracks provide your R/C tank model with realistic sag effects for an enhanced realism.

Information and specifications coming soon.

Mini 4WD Limited Edition

19mm Aluminum Ball-Race Roller Set (Dish/Blue)

Item No：94739

★These high performance rollers come in an eye-catching blue color. ★Set includes two lightweight 19mm aluminum dish rollers. ★Two 520 ball bearings are included to provide a smooth rolling action.

Information and specifications coming soon.

Tamiya Italeri Series No.6

1/48 Arado Ar196A

Item No：37006

【 German Navy's Significant Floatplane 】 The Arado Ar196A was used by the German Navy and was used in a wide range of roles during WWII. The sturdy, low-wing monoplane metal construction was equipped with twin float and a 960hp BMW132K air-cooled radial engine that provided the aircraft with superb flight performance and stability on the sea surface. It was armed with two 7.9mm machine guns at the front and rear, two 20mm cannons, and hardpoints for 50kg bombs. Deployment began in 1939 and the aircraft were loaded onboard battleships Bismarck and Printz Eugen as well as auxiliary cruisers. In addition to shipboard units, they were also used by coastal reconnaissance units for reconnaissance, patrol, and anti-shipping missions using their heavy armament. The aircraft continued to conduct reconnaissance and patrol missions from coastal bases until the end of the war.

【 About the Model 】 ★1/48 scale plastic assembly kit model of the Arado Ar196A. Length: 229mm, Wingspan: 260mm. ★The sturdy form of the aircraft equipped with twin float and heavy armament has been realistically reproduced. ★Distinctive features, including a engine cowling with teardrop-shaped bulges and fabric-covered rear fuselage, have all been richly finished. ★Highly detailed air-cooled engine and cockpit area. ★Canopy and flaps can be assembled in either open or closed position and up or down position respectively. ★50kg bombs (2pcs.) can be attached to wing undersurface. ★A dolly for displaying the model included. ★5 types of markings are included to depict the aircraft that were onboard battleships Bismarck and Prinz Eugen and auxiliary cruisers Thor and Widder.

Specifications are subject to change without notice.

Limited Edition Scale Model

1/35 Zundapp KS750 & BMW R75

Item No：35023

★This is a 1/35 scale plastic assembly model set of the Zundapp KS750 & BMW R75, significant motorcycles used by German army during WWII. ★The inline 2-cylinder engine including its cooling fins as well as drive shaft which connects transmission case and rear axle are all realistically reproduced. ★The differences between the pipe-frame of the BMW and the pressed-frame of the Zundapp are accurately remodeled. ★2 soldier figures riding bikes with rifles on their back included.

Information and specifications coming soon.

Limited Edition Scale Model

1/35 U.S. Light Tank M3 Stuart

Item No：35042

★This is a 1/35 scale plastic assembly kit model of the U.S. army's main light tank the M3 Stuart, which was also used by Allied forces including the British and Russian armies during WWII. ★Compact style of the tank, including its riveted hull and turret, has been realistically reproduced. ★Tank crew figure as well as decals to depict the tank used by the U.S. (2) and British (1), and Canadian (1) armies included.

Information and specifications coming soon.

1/35 Military Miniature Series No.309

Russian Tank BT-7 Model 1935

Item No：35309

【 The Russian Fast Tank 】 The BT-7 was a Russian tank produced from 1935 which incorporated some design features from tanks developed by American engineer Walter Christie. “BT” stood for “Bystrokhodny Tank (Fast Tank)” and the tank featured an excellent maneuverability. Equipped with a 47mm main gun, it was one of the better-armed tanks of that period and it also had sloped frontal armor, a feature that would make its way into later tanks such as the T-34. BT-7s were first deployed during the Spanish Civil War and also took part in battles against German forces on the Eastern Front until enough T-34s became available to replace them.

【 About the Model 】 1/35 scale plastic assembly kit model of the Russian BT-7. Length: 161mm, Width: 65mm. ★The unique wedge-shaped frontal area and large road wheels have been accurately reproduced. ★Hull side features the same double-wall structure as the actual tank. ★Mechanically complicated suspension features superb details as well as ease of assembly. ★Assembly type tracks included. ★5 types of markings also included.

Specifications are subject to change without notice.