TQ R/C & Hobbies

1/10 Expert Built Series No.102

XB Alfa Romeo MiTo (M-05)

Item No：57802

【 The Baby Alfa 】 The three-door Alfa Romeo MiTo made its debut in 2008. It was named after Milan, where it was designed, and Torino, where it was manufactured. Featuring a stylish form and a sporty driving performance powered by a front-mounted 1.47 liter inline 4-cylinder engine, the MiTo attracts many fans all around the world. This is a ready-to-run R/C model of the cute MiTo. The stylish form of the car as well as its shield-shape front grille have all been realistically reproduced with durable polycarbonate. Separate light case parts are also included to enhance the scale realism. You can enjoy the same great handling performance as that of the actual car with the front wheel drive M-05 chassis right out of the box!

【 R/C Units, Battery Pack, and Charger 】 R/C units are installed onto the pre-assembled chassis, and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. The FM transmitter features detachable grip covers to match your hand size, as well as the throttle trigger covers to increase the size of the throttle trigger for easier trigger movement. (Battery pack and charger are included for Japan only.)

【 Low Center of Gravity M-05 Chassis 】 The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　an easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provides stable high-speed cornering. In addition, 60D radial tires with tread pattern are mounted on 11-spoke wheels.

【 Specifications 】 ●Length: 383mm, Width: 170mm, Height: 130mm　●Wheelbase: 239mm (long wheelbase)　
●Tread (Front & Rear): 138mm　●Front-Mounted Motor Front Wheel Drive　●3-Bevel Differential Gears　●3-Piece Steering Tie-Rod　●Front & Rear Double Wishbone Suspension　●Front & Rear Friction Dampers　●Gear Ratio=5.8 :1　
●Tire Width/Diameter: 25/59mm　●Type 540 Motor Included　●Electronic Speed Controller (Forward/Reverse Type) Included.　※Requires R6/AA/UM3 Batteries (x8) for Transmitter (sold separately).

Specifications are subject to change without notice.

1/10 R/C Expert Built Series No.104

XB Datsun 240Z Rally (TT-01 Type-E)

Item No：57804

★The Datsun 240Z Rally, which raced in worldwide rally races in the 1970s, now comes released as ready to run R/C model. ★The dynamic form of the rally car has been realistically reproduced with polycarbonate and is equipped with light pods. The finished body features the bonnet painted in flat black. In addition, LEDs are included to depict realistic head and tail lights. ★The shaft-driven TT-01 Type-E chassis offers great handling performance.

Information and specifications coming soon.

Limited Edition R/C Product

Wolf WR1

Item No：84124

【 The Legendary F1 Machine 】 This is a 1/10 scale R/C assembly kit model of the Wolf WR1, which made its debut at the Argentina GP, the opening round of 1977 Formula One season. The race saw a sensational and historic result as it was the first time a new team to win their debut race with a new car. This result helped Jody Scheckter to take 2nd place in the Driver's Championship for that season. The wedge-shaped body including the induction pod has been realistically reproduced with polycarbonate. Separate parts for side mirrors, front wing panels, and a driver figure are included. Aluminum stays help depict the uniquely mounted rear wing. Providing the model with the same sharp handling performance as the actual is the direct-drive 2WD F104W chassis.

【 Replicating 1970s Wide Body Dimensions 】 The F104W chassis features a longitudinal battery layout which allows for a slim chassis design. Chassis features a double deck layout with 2.0mm upper and 3.2mm lower FRP decks. F103 front suspension arms are incorporated to accurately replicate the wide body dimensions of this classic 1970s race car. Front independent kingpin coil spring suspension as well as rear 3-point suspension with friction plate and coil spring offers a sharp handling performance. Direct drive 2WD transmits motor power directly to the spur gear which is equipped with a ball differential. In addition, realistic semi-pneumatic rubber tires come with inner sponges.

【 Specifications 】 ●Length: 463mm ● Width: 205mm ● Height: 104mm ● Weight: 800g ●Wheelbase: 270mm 
●Tread＝F: 170mm, R: 156mm ●Tire Width/Diameter＝F: 31/56mm, R: 50/67mm ●FRP Half Double Deck ●Horizontally-mounted motor rear direct drive 2WD ●Ball Differential ●Symmetrical Steering Tie-Rods ●Suspension: F/Kingpin Coil Spring, R/T-Bar Rigid ●Gear Ratio＝4.16:1 (25T Pinion Gear/104T Spur Gear) ●Type 540 Motor Included ●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 Batteries (x8) for Transmitter

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.464

Suzuki Swift Super 1600 (M-05Ra)

Item No：58464

【 Drive The JWRC Machine 】 The World Rally Championship (WRC) is competed with 4WD rally cars with 2-liter turbo engines. Also raced at the same time and stages with the WRC is the Junior World Rally Championship (JWRC), which use front wheel drive cars with 1,600cc engines. This is a 1/10 scale R/C assembly kit model of the Suzuki Swift Super 1600, which was entered at Rd.5 Rally Finland in the 2005 JWRC season. It demonstrated an impressive performance to take outright 2nd place ranking. The stylish form of the car, including large F/R fenders and rear wing, has been realistically reproduced with polycarbonate. Separately molded light cases enhance its realism. In addition, a sticker sheet is included to depict the car's livery that featured many sponsor logos.

【 Rally Ready M-05Ra Chassis 】 Based on the front wheel drive M-05 chassis, the rally-tuned M-05Ra chassis features a lightweight, narrow, durable, and an easy-assembly semi-monocoque resin frame. The 4-wheel independent double wishbone suspension is equipped with specially designed hub carriers and F/R uprights to increase ground clearance by 5mm. The front skid guard, side guards, and rally block tires are also included to allow you to enjoy both gravel and tarmac driving.

【 Specifications 】 ●Length: 347mm ●Width: 168mm ●Height: 146mm ●Wheelbase: 225mm ●Weight: 870g ●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 26/60mm ●Monocoque Frame Chassis ●Front Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio＝7.25：1 ●Type RS540 Motor Included ●Requires Electronic Speed Controller (ESC)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 Batteries (x8) for Transmitter

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.467

Castrol Honda Civic VTi (FF-03)

Item No：58467

【 Works Machine Reborn 】 Featuring a high-powered 1.6 liter VTEC engine and having great maneuverability, the Honda Civic competed in not only domestic races but also international races in the first half of 1990s. The Honda Civic VTi, raced by Team Castrol in the British Saloon Car Cup from 1993, now comes reproduced as a 1/10 scale electric R/C assembly car model. The compact hatchback body is accurately reproduced in polycarbonate and stickers are included to depict the eye-catching livery. The sharp-handling FWD FF-03 chassis offers a unique R/C driving experience.

【 Next Generation FF-03 Chassis 】 The longitudinal battery layout allows for a slim chassis design, with the R/C units loaded on either side for optimum balance. In addition, the front-mounted, compact gearbox is equipped with a ball differential and provides the chassis with an ample amount of traction. 4-wheel double wishbone suspension features CVA oil dampers. An Inboard Front Suspension set-up with short reversible suspension arms enables well balanced settings. Furthermore, the rocker bridge is equipped with stabilizer holders. Take control of the FF-03 chassis and enjoy a new driving experience.

【 Specifications 】 ●Length: 414mm, Width: 185mm, Height: 132mm ●Wheelbase: 257mm (257, 245, 233mm Adjustable) ●Tread (F/R): 157mm ●Bathtub Type Chassis Frame ●Front Motor Front Wheel Drive ●Ball Differential Gear ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●CVA Shock Unit Super Mini ●Tire Width/Diameter (F/R): 24mm/64mm ●Gear Ratio＝6.80:1 ●Type 540 Motor Included ●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 (x8) Batteries for Transmitter

Specifications are subject to change without notice.

1/6 Motorcycle Series No.35

Honda CX500 Turbo

Item No：16035　 ※Limited Edition

【 The First Turbo-Charged Motorcycle 】 The Honda CX500 Turbo was the world's first turbo-charged production motorcycle and made its debut at the 1980 Cologne Motor Show. Powering the bike was an 82hp liquid-cooled V-twin engine fitted with a turbo unit which Honda developed with Ishikawajima-Harima Heavy Industries. In combination with a computerized fuel injection system, the 500cc engine featured the same performance as 1000cc engine. Additional features included Honda's unique Pro-Link rear suspension and a 4-step adjustable anti nose dive front suspension. The rectangular headlight was integrated into the large cowling, providing the bike with luxurious appearance. With its stylish form as well as superb performance, the CX500 is one of the most exciting motorcycles in history.

【 About the Model 】 ★1/6 scale plastic assembly kit model of the Honda CX500 Turbo, the world's first turbo-charged production motorcycle. ★The Honda's unique Comstar wheels have a realistic finish. ★Front suspension is movable thanks to the internal coil spring. ★Metal-plated metal front forks. ★Accurately reproduced headlight features superb details. ★One-piece front cowling has nylon mesh covers. ★Drive shaft joints are fitted with rubber tubes to enhance realism. ★Side covers are removable to showcase internal mechanism even after assembly. ★Rear brake light is molded with a clear red part. ★Semi-pneumatic rubber tires feature realistic tread pattern and sidewall letterings.

Specifications are subject to change without notice.