TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C Super Storm Dragon

Wednesday, 03 June 2020 13:36 Published in Tamiya

Special Edition R/C Product

1/10 R/C Super Storm Dragon

Item No: 47438

This assembly kit creates the Super Storm Dragon, a nimble R/C buggy at home on- and off-road. Previously only available as a spare body parts set, it is now paired with the proven Hornet chassis. The body is molded in lightweight and durable polycarbonate, pre-cut and pre-painted in white, for a streamlined assembly process.

Information is current as of May 12, 2020. Specifications are subject to change without notice.

1/10 R/C TA07RR Chassis Kit

Wednesday, 03 June 2020 13:33 Published in Tamiya

Special Edition R/C Product

1/10 R/C TA07RR Chassis Kit

Item No: 47445

A Real Racer
This 4WD R/C touring car chassis assembly kit takes the single-belt driven, composite frame TA07 PRO chassis and pairs it with a range of option parts for an ultra-racy car. A dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex while boosting front grip and cornering, and a refined drivetrain uses double cardan drive shafts, TRF420 front axles, aluminum center pulley and more. Aluminum adjustable suspension mounts and parts from the TRF419 suspension upgrade set further bolster the car, as do a dedicated servo mount and soft stabilizers. Of course, the three selectable motor positions are still available for great freedom of setup.

Featured Components
●Carbon fiber front-center stiffener ●Aluminum stiffener mount ●Aluminum servo mount ●Carbon-reinforced A parts (bulkheads) ●Aluminum adjustable suspension mounts ●TRF419 suspension upgrade set ●TRF420 front direct pulley (37T) ●TRF420 gear differentials ●TRF 420 front axles ●42mm drive shafts for double cardan shafts ●TRF super short big bore dampers ●TRF420 steel front direct cups ●Integrated stabilizer end 5mm adjusters ●TA07 carbon damper stay set (for TRF super short big bore dampers) ●TA07 aluminum steering arm set ●TA07 adjustable Ackerman set ●TRF super short big bore damper upgrade set

Separately Required Items
★Body ★Type 540 motor ★Tires ★Wheels ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of May 9, 2020. Specifications are subject to change without notice.

1/10 R/C Plasma Edge II Gun Metal (TT-02B)

Wednesday, 03 June 2020 13:31 Published in Tamiya

Special Edition R/C Product

1/10 R/C Plasma Edge II Gun Metal (TT-02B)

Item No: 47446

This R/C model assembly kit creates a Gun Metal color theme version of the off- and on-road capable Plasma Edge II. Special color variations of the stickers feature fluorescent yellow accents that match nicely with the wheels.

Shaft-Driven 4WD and Superior Handling from the TT-02B
The shaft-driven 4WD TT-02B buggy chassis employs a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA oil shock units, giving the car assured handling, while left/right suspension arms and uprights are identical to facilitate hassle-free assembly. Front/rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The tops can be removed simply by loosening a few screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gear, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.

Information is current as of May 12, 2020. Specifications are subject to change without notice.

Volvo FH16 Globetrotter 750 8x4 Tow Truck

Wednesday, 03 June 2020 13:24 Published in Tamiya

1/14 R/C Truck Series no.62

Volvo FH16 Globetrotter 750 8x4 Tow Truck

Item No: 56362

To the Rescue!
Volvo is a renowned actor in the global commercial vehicle market, with one of their flagship brands being the FH Series that underwent a full model change in 2012. This R/C model assembly kit recreates the 750hp engine FH16 Globetrotter 750 8x4 tow truck from that range. The model has a realistic cab and body, the former featuring a photo-etched front grille and interior details, the latter opening doors. Its fascinating towing mechanism uses plenty of metal parts and winch boom, underlift and outriggers are movable manually. The front mounted TR Mighty Tuned motor (35T) provides ample power to the two rear axles, via a three-speed transmission. Gear changes are also possible via transmitter controls, and the model can tow subjects such as 1/14 scale R/C tractor trucks.

Optional Extras for Ultra Realism

Item 56553 Electric Actuator Set for 1/14 Scale R/C Tow Truck
This separately sold set allows raising of the winch boom and underlift via R/C controls. It uses a precision geared motor and spindle cylinder, plus the ACU-02 unit, and also features a toggle switch for manual control.

Item 56523 Tractor Truck Multi-Function Control Unit MFC-03
Tamiya Multi-Function Control Units (sold separately) offer light, sound, and vibration operation to accompany your R/C truck experience. Engine sounds have been digitally recorded from actual trucks, and together with air horn, gear shifting, and many other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

Specifications
●Length: 732mm, Width: 199mm, Height: 309mm, Weight (with R/C equipment and battery pack): Approx. 5.9kg ●Wheelbase: 155 + 245 + 103mm ●Tread: 155mm (Front), 138mm (Rear, Double Tire) ●Chassis: Aluminum & Polycarbonate Resin Ladder Frame ●Suspension: Front/Rear Leaf Springs ●Caster Angle: 0° (Front & Rear) ●Camber Angle: 0° (Front & Rear) ●Toe Angle: 0° (Front & Rear) ●Dampers: Aluminum Dummy Dampers ●Drivetrain: Rear Double Axle Drive ●Transmission: 3-gear transmission (shifts operated via transmitter) ●Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1 ●Diff. Gear: 3-bevel differentials ●Motor: TR Mighty-Tuned (35T) ●Tire Width/Diameter: 30mm/85mm (Front), 22mm/84mm (Rear)

Separately Required Items
★4-Channel R/C System with slide trim levers and self-neutral sticks ★Servos x2 ★ESC or Multi-Function Control (MFC) Unit ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger

Information is current as of May 9, 2020. Specifications are subject to change without notice.

1/10 R/C Comical Avante (GF-01CB)

Wednesday, 03 June 2020 13:21 Published in Tamiya

Electric R/C Car Series no.678

1/10 R/C Comical Avante (GF-01CB)

Item No: 58678

Comical Avante!
This R/C model assembly kit creates a 4WD buggy, with a lightweight and durable stylized polycarbonate version of the legendary Avante body. Paint it up in iconic Avante metallic blue, apply the familiar stickers, and voila! A new, Comical Avante! A T-shirted figure is included in the kit for installation at the wheel, as are left and right flags, plus depictions of stylish megaphone muffler ends. The GF-01CB chassis is a gear-driven unit that provides a thrilling drive and super wheelies when you jam on the throttle.

GF-01: Seriously Stable 4WD
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and WR-02 or GF-01 Hop-Up Option parts are available to hop-up your model.

Specifications
●Length: 345mm ●Width: 240mm ●Height:174mm ●Tread: 188mm (Front), 184mm (Rear) ●Tire Width/Diameter: 46mm/99mm (Front), 56/99mm (Rear) ●Gear-Driven 4WD ●Monocoque Frame ●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●CVA Oil Dampers ●Gear Ratio = 18.03:1 ●Type 540 Motor ●Requires Electronic Speed Controller (separately sold)

Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Suzuki Swift sport (M-05)

Wednesday, 03 June 2020 13:18 Published in Tamiya

Electric R/C Car Series no.679

Suzuki Swift sport (M-05)

Item No: 58679

★This R/C model assembly kit recreates the Suzuki Swift sport, a popular hot hatch that received an overhaul in 2017. ★The Swift sport aptly features a sporty, wide body and is powered by a 140hp 1.4-liter engine, giving its driver an enviably enjoyable drive. ★The model is based upon the proven front wheel-drive of the M-05 chassis.

Information is current as of May 12, 2020. Specifications are subject to change without notice.

1/10 R/C Formula E GEN2 Car - Championship Livery

Wednesday, 03 June 2020 13:16 Published in Tamiya

Electric R/C Car Series No.681

1/10 R/C Formula E GEN2 Car - Championship Livery

Item No: 58681

Enter the GEN2
This is an R/C model assembly kit depicting the GEN2 car used from 2018 in the Formula E championship, the pinnacle of electric car racing. The sleek, high-tech body with cowled wheels is recreated in polycarbonate. Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis.

TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.

Specifications
★Length: 430mm, Width: 188mm, Height: 99mm ★Wheelbase: 257mm ★Tire Width/Diameter: 24/64mm (Front & Rear) ★Composite Monocoque-Frame Chassis ★Shaft-Driven 4WD ★Front & Rear Oil-Filled Gear Differentials ★3-Piece Steering Tie-Rod ★Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension ★CVA Oil Dampers (Front & Rear) ★Gear Ratio = 6.56:1 (with kit 24T pinion) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of April 27, 2020. Specifications are subject to change without notice.

1/24 R/C MudMad (SW-01)

Wednesday, 03 June 2020 13:13 Published in Tamiya

Star Unit Series no.12

1/24 R/C MudMad (SW-01)

Item No: 57412

Length: 192mm. Image shows painted and assembled kit.
Body is pre-painted, with pre-cut wheel arches and holes for body mounts, etc. made.

Going Mad for the Mud
The Star Unit series welcomes another newcomer in the shape of the MudMad, with a Yamazaki Takayuki-designed body pre-painted in light blue. ★190mm long and 150mm wide, the SW-01 chassis offers compact, highly fun 4WD. Its gear-driven powertrain has the motor central in the slim monocoque, and 70mm tires for a powerful drive. The suspension links a single piece front upper arm to steering motion, together with front and rear differentials realizing a tight turning circle.

Separately Required Items
★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source

Information is current as of May 11, 2020. Specifications are subject to change without notice.

TC-01 Titanium Screw Set

Wednesday, 03 June 2020 13:11 Published in Tamiya

Special Edition R/C Product

TC-01 Titanium Screw Set

Item No: 47449

★This set of seventy-five lightweight titanium screws will save approximately 18g over kit-standard components, giving you a lighter car!

Information is current as of April 30, 2020. Specifications are subject to change without notice.

1/10 Scale R/C Comical Avante Body Parts Set

Wednesday, 03 June 2020 13:08 Published in Tamiya

Spare Parts Series no.1655

1/10 Scale R/C Comical Avante Body Parts Set

Item No: 51655

The stylish Comical Avante body parts are also to be made available as a body parts set, including wing, stickers and masking stickers!

Information is current as of May 12, 2020. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  Next 
  •  End 
  • »
Page 1 of 5

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday4256
mod_vvisit_counterYesterday4254
mod_vvisit_counterThis week17644
mod_vvisit_counterThis month24274
mod_vvisit_counterAll4300038

Who's Online

We have 225 guests online