TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/35 West German Tank M47 Patton

Tuesday, 02 June 2020 14:46 Published in Tamiya

Tamiya Italeri Series no.28

1/35 West German Tank M47 Patton

Item No: 37028

Under German Ownership
Production of the M47 Patton got underway in 1951; it was successor to its namesake M46 Patton, with the hull carried over from the M46 and combined with an 810hp gasoline engine for a top speed of 48km/h. Its gun was an L/50 rifled piece, paired with a cutting edge stereoscopic rangefinder. In all, more than 8,500 M47 Pattons were produced, and although their time with the U.S. military was relatively short, they were in many cases provided to friendly countries such as France, Austria and Germany. The latter received 1,100 in the course of 1956 and 1957, deploying them in tank battalion and mechanized infantry units. It was often fitted with smoke dischargers and rain guards, as it served in the nascent re-formed West German military.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length; 245mm, width: 98mm. ★The original Italeri kit is powered up with new and re-tooled parts. ★Canvas mantlet cover and West German spec smoke dischargers and hull rear convoy light are new components. ★Plastic plate is included to recreate rain guards that protected the engine room. ★Belt type recreations of tracks can be painted and cemented. ★Features a moving commander's hatch, and a gunner's hatch that can be assembled open or closed. ★Comes with a Tamiya figure, M2 machine gun and a wealth of accessories. ★West German and Austrian marking options are included in the box.

★Precision cementing
Item 87062 Tamiya CA Cement (Quick Type)

★Make the details stand out!
Item 87131 Panel Line Accent Color (Black)
Item 87132 Panel Line Accent Color (Brown)
Item 87140 Panel Line Accent Color (Dark Brown)
Item 87199 Panel Line Accent Color (Dark Gray)
Item 87201 Figure Accent Color (Pink-Brown)

★Adding realistic weathering effects to your model
Tamiya Weathering Master & Stick

★Present your model as it deserves to be displayed
Item 73005 Display Case D

Information is current as of April 28, 2020. Specifications are subject to change without notice.

1/12 Scale Honda CBR1000RR-R Front Fork Set

Tuesday, 02 June 2020 14:44 Published in Tamiya

Detail-Up Parts Series No.90

1/12 Scale Honda CBR1000RR-R Front Fork Set

Item No: 12690

★Make your model even more astounding with this Detail-Up parts set! ★It includes gold color anodized aluminum fork outer tubes and reservoirs, gold color plated brass fork inner tubes, yellow coil spring, plastic fork bottoms and more.

Information is current as of April 28, 2020. Specifications are subject to change without notice.

Dual Ridge Jr. (VZ)

Tuesday, 02 June 2020 14:42 Published in Tamiya

Racing Mini 4WD Series No.96

Dual Ridge Jr. (VZ)

Item No: 18096

Pint-Sized Dual Ridge
This assembly kit creates the Dual Ridge Jr., a Mini 4WD car that serves as a younger sibling to the famous Tamiya R/C car designed by Takayuki Yamazaki. Yamazaki was involved in the design of this product too, and it has the trademark bulging cockpit and oversized rear wing. Eight small holes have been integrated into the roof to help funnel air in for cooling purposes. It runs on the VZ chassis, a compact and versatile unit that will mean your little Dual Ridge Jr. is the talk of the racetrack - wherever you race!

VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS.

Specifications
★Length: 158mm ★Width: 98mm ★Height: 48mm ★Includes motor ★Body: silver ABS ★Chassis & A Parts: black ABS ★Black super hard low-profile tires ★Silver color plated 5-spoke wheels ★Gear Ratio = 3.5:1 ★Metallic stickers included ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Roborace DevBot 2.0 (MA)

Tuesday, 02 June 2020 14:38 Published in Tamiya

Mini 4WD PRO Series no.56

Roborace DevBot 2.0 (MA)

Item No: 18656

Roborace Comes to Mini 4WD!
This assembly kit creates a Mini 4WD car version of the Roborace DevBot 2.0. The prototype race car makes for a stylish Mini 4WD subject, with the body molded accurately in black and based upon the high performance MA chassis. Stickers are included in the kit to recreate markings and even a choice of emoji for the Emotion System display. What are you waiting for? Get Roborace onto your Mini 4WD track!

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

What is the Roborace DevBot 2.0?
Roborace is a revolutionary series for AI-controlled cars. DevBot 2.0 is the all-electric vehicle used for Roborace Seasons Alpha and Beta, a rear-wheel drive car that can be piloted by a human or AI driver, with lidar, cameras and GPS helping the car to navigate when in autonomous mode. The Emotion System on the side of the car shows various different icons to signify the DevBot 2.0's status and actions.

Specifications
★Length: 156mm ★Width: 97mm ★Height: 43mm ★Includes double-shaft motor ★Body: black ABS plastic ★MA Chassis: black ABS ★A Parts: fluorescent orange low-friction plastic ★Black low profile tires ★Black fin spoke wheels ★Gear ratio = 3.5:1 ★Stickers included ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Neo-VQS (VZ Chassis) Japan Cup 2020 (Polycarbonate Body)

Item No: 95130

Commemorative Car
This assembly kit creates a limited edition version of the Neo-VQS, released to commemorate the Japan Cup 2020. It features a clear polycarbonate body that is not only lightweight but is a breeze to customize for your own racing or aesthetic needs, and is based upon the compact and versatile VZ chassis, molded in vibrant fluorescent yellow. Carbon fiber reinforced Y-spoke wheels add a touch of elegance, and are paired with super hard tires featuring commemorative lettering.

VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. This chassis features a gear ratio of 3.5:1.

Specifications
★Length: 158mm ★Width: 98mm ★Height: 43mm ★Includes motor ★Chassis & A Parts: fluorescent yellow ABS ★Black super hard low-profile tires ★Carbon reinforced Y-spoke wheels (black) ★Gear Ratio = 3.5:1 ★Clear stickers included ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Geo Glider Black Special (FM-A)

Tuesday, 02 June 2020 14:32 Published in Tamiya

Special Edition Mini 4WD Product

Geo Glider Black Special (FM-A)

Item No: 95564

★This assembly kit creates a Black Special version of the dashing Geo Glider! ★The fighter jet-esque body is molded in tinted smoke, with stickers providing markings such as digital camouflage designs. ★The FM-A chassis is molded in tough, white polycarbonate-ABS plastic, and black wheles are paired with maroon low-profile tires for a smooth accent. ★A parts are molded in purple.

Information is current as of April 30, 2020. Specifications are subject to change without notice.


Hexagonite Black Special (MA)

Tuesday, 02 June 2020 14:29 Published in Tamiya

Special Edition Mini 4WD Product

Hexagonite Black Special (MA)

Item No: 95565

★This is a Black Special version of the stylish Hexagonite, the original model of which was inspired by an entry in to a Mini 4WD Design Contest. ★Features tinted smoke color body and a combination of largely orange and black components. ★The MA chassis is an aerodynamically advanced design molded in soft orange ABS plastic with black low-friction A parts; orange whels are paired with black super hard low-profile tires. ★Metallic stickers are included to decorate your model.

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Spin-Viper

Tuesday, 02 June 2020 14:25 Published in Tamiya

Special Edition Mini 4WD Product

Spin-Viper

Item No: 95585

This assembly kit creates a static Mini 4WD model of the Spin-Viper from the original Let's and Go!! cartoon in Japan. It originally appeared in the Mechanical Mini 4WD series. Two jutting rear fins provide a unique accent on the body, which is composed of front and rear clear sections, the rear being hinged. Metal plated interior components give a hint of a real car's interior workings, while tread patterns are molded into the tires. Although this is a static model, the body can be modified so as to fit upon the Super-1, Super TZ and Super FM chassis.

Compatible Cars
Super-1, Super FM and Super TZ chassis cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Diomars-Nero

Tuesday, 02 June 2020 14:22 Published in Tamiya

Special Edition Mini 4WD Product

Diomars-Nero

Item No: 95586

This assembly kit creates a static Mini 4WD model of the Diomars Nero from the original Let's and Go!! cartoon in Japan. It originally appeared in the Mechanical Mini 4WD series. One big talking point of this model is its 4-wheel steering system, which can be switched between two different patterns. Metal plated interior components give a hint of a real car's interior workings, while tread patterns are molded into the tires. Although this is a static model, the body can be modified so as to fit upon the chassis listed below.

Compatible Cars
Super-1, Super-II, Super TZ, Super X, Super XX and VS Chassis cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Hyper-Dash 3 Motor J-Cup 2020

Tuesday, 02 June 2020 14:18 Published in Tamiya

Limited Edition Mini 4WD Product

Hyper-Dash 3 Motor J-Cup 2020

Item No: 95128

★A special version of the Hyper-Dash 3 motor released to coincide with the staging of Japan Cup 2020. ★Packaging and motor label are emblazoned with JAPAN CUP 2020 wording. ★The motor offers highly-efficient, durable and balanced performance thanks to silver carbon brushes.

★Input voltage: 2.4-3.0V
★Torque at recommended load: 1.4-1.9mN-m
★RPM: 17,200-21,200
★Current consumption: 1.6-3.0A

Compatible Cars
Mini 4WD cars

Information is current as of May 25, 2020. Specifications are subject to change without notice.

Page 3 of 5

Social sharing

Who's Online

We have 161 guests online