TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Hyper-Dash Motor PRO J-Cup 2020

Tuesday, 02 June 2020 14:16 Published in Tamiya

Limited Edition Mini 4WD Product

Hyper-Dash Motor PRO J-Cup 2020

Item No: 95129

★A special version of the Hyper-Dash 3 PRO motor released to coincide with the staging of Japan Cup 2020. ★Packaging and motor label are emblazoned with JAPAN CUP 2020 wording. ★The motor offers highly-efficient, durable and balanced performance thanks to silver carbon brushes. ★8T pinion gears are sold separately.

★Input voltage: 2.4-3.0V
★Torque at recommended load: 1.4-1.9mN-m
★RPM: 17,200-21,200
★Current consumption: 1.6-3.0A

Compatible Cars
Mini 4WD PRO cars

Information is current as of May 25, 2020. Specifications are subject to change without notice.

HG Carbon Multi Roller Setting Stay (1.5mm) J- Cup 2020

Tuesday, 02 June 2020 14:07 Published in Tamiya

Limited Edition Mini 4WD Product

HG Carbon Multi Roller Setting Stay (1.5mm) J- Cup 2020

Item No: 95131

★This commemorative stay is released in honor of the Japan Cup 2020. ★Crafted in 1.5mm thick carbon fiber material, it has holes that allow positioning of 9mm, 13mm and 19mm rollers in wide positions.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars
*Some chassis and bodies may require modifications.

Information is current as of April 30, 2020. Specifications are subject to change without notice.


HG Carbon Rear Brake Stay (1.5mm) J- Cup 2020

Tuesday, 02 June 2020 14:02 Published in Tamiya

Limited Edition Mini 4WD Product

HG Carbon Rear Brake Stay (1.5mm) J- Cup 2020

Item No: 95133

★This commemorative plate is crafted in lightweight and tough 1.5mm thickness carbon fiber material, with a design that causes minimal roller disruption. ★Use it to mount brake sponge for that extra edge on undulating circuits. ★Screws and other small components for attachment are included.

Compatible Cars
MA, MS, VZ, FM-A, AR, VS, Super-II, Super X, Super XX and Super TZ-X Chassis cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

HG Lightweight 17mm Aluminum Ball-Race Rollers (Ringless)

Item No: 95563

★These are lightweight versions of the popular 17mm aluminum ball-race rollers, with 520 ball bearings built in for superior smoothness of rotation. ★The product includes two rollers, plus screws and spacers for use in attachment. ★These components are around 25% lighter than the base design.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Brake Sponge Set (1mm Red)

Tuesday, 02 June 2020 13:58 Published in Tamiya

Special Edition Mini 4WD Product

Brake Sponge Set (1mm Red)

Item No: 95566

★Affix this sponge to the underside of your chassis, bumper or stay to help brake your car on slope sections. ★1mm thick, it will fit in even the tightest of spaces.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Basic Tune-Up Parts Set for VZ Chassis

Tuesday, 02 June 2020 13:56 Published in Tamiya

Grade-Up Parts series no.526

Basic Tune-Up Parts Set for VZ Chassis

Item No: 15526

★This handy set is an excellent way for less experienced racers to upgrade the VZ chassis! ★Includes FRP plates, 13mm rollers molded in low-friction plastic, four adjustable mass dampers, plus stabilizer ball heads. ★The plates are compatible with 9mm, 11mm, 13mm, 17mm and 19mm rollers, while plastic parts are molded in cheery fluorescent orange. ★Parts and tools for attachment are included, too!

Compatible Cars
VZ Chassis cars

Information is current as of April 30, 2020. Specifications are subject to change without notice.

Gondola Lift

Tuesday, 02 June 2020 13:47 Published in Tamiya

Special Edition Educational Construction Product

Gondola Lift

Item No: 69936

★This assembly kit creates a working gondola that moves end-to-end along its rope, and is turned back and forth by stoppers. ★Gondola is assembled from card. ★Features a 3-meter rope with components to adjust its length and tension. ★Requires one R6/AA/UM3 battery (not included).

Information is current as of May 12, 2020. Specifications are subject to change without notice.

Kayak

Tuesday, 02 June 2020 13:41 Published in Tamiya

Educational Construction Series no.238

Kayak

Item No: 70238

★This assembly kit creates a dynamic kayak model, with a submarine motor and underwater gearbox underneath the central float powering the model via cranks and link rods as it paddles gallantly forward. ★Length: 210mm, width: 165mm, height: 105mm. ★Change paddle blade angle to alter movement. ★Stickers are included to decorate the figure. ★Includes everything needed for simple snap-fit/screw-together assembly.

Separately Required Items
★R06/AAA/UM4 battery x1

Information is current as of May 25, 2020. Specifications are subject to change without notice.

Link Type Track & Sprocket Set

Tuesday, 02 June 2020 13:38 Published in Tamiya

Educational Construction Series no.237

Link Type Track & Sprocket Set

Item No: 70237

★This set includes parts to assemble a track link-by-link, giving you ultimate control over length. ★Links are molded in black low-friction POM plastic, and feature grippy pads for stable drive. ★Also included are yellow plastic sprocket wheels (x2), road wheels (large x6, small x10) and idler wheels. ★Comes with five 3x100mm shafts and one 3x100mm hex shaft. ★Maximum length: 140 links (896mm)

Information is current as of May 12, 2020. Specifications are subject to change without notice.

HG Tweezers (Grip Type Tip)

Tuesday, 02 June 2020 13:35 Published in Tamiya

Tamiya Craft Tools Series no.155

HG Tweezers (Grip Type Tip)

Item No: 74155

These precision tweezers are perfect for use in the assembly of static models and maintenance of R/C models thanks to their pronged tips, which are designed to grip small parts securely. Each tip has two prongs and a groove to reduce the risk of parts coming loose out of the front and sides, and allow you to easily grip minute parts such as 3mm diff balls and small-diameter shafts. ★Crafted in stainless steel.

Caution: when using
●Tips have pointed ends. Handle with care. ●Never use to hold jewelry or other valuables. ●Do not use on parts which have their final paint job applied. ●Do not apply excessive force, twist or bend the tweezers as this can lead to damage to the tweezers or the item being held. ●Do not use to crush or scrape parts. ●This product is not insulated. Never use near or on live electric circuits: risk of electric shock. ●This product is not demagnetized. Do not use or store near vulnerable machinery/media. ●Always hook the included ring over the tips after use. ●Keep out of reach of small children.

Information is current as of May 12, 2020. Specifications are subject to change without notice.

Page 4 of 5

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday1041
mod_vvisit_counterYesterday4402
mod_vvisit_counterThis week22568
mod_vvisit_counterThis month32848
mod_vvisit_counterAll4203607

Who's Online

We have 247 guests online