TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Martini Brabham BT44B 1975

Monday, 07 June 2021 11:56 Published in Tamiya

1/12 Big Scale Racing Car Series no.42

Martini Brabham BT44B 1975

Item No: 12042

In the Thick of the Action
With Carlos Reutemann and Carlos Pace at the wheel, the BT44B produced some excellent results during the 1975 season on its way to helping the Martini Racing team earn second place in the Constructor's Championship. Beginning with the BT42 in 1973, Motor Racing Developments designer Gordon Murray evolved the design into the BT44 in 1974 and finally the BT44B in 1975. Pace drove the car to a first place finish at the Brazil GP and Reutemann did the same at the German GP, making it one of the more competitive cars in the field.

About the Model
★This is a 1/12 scale plastic model assembly kit. Length: 355mm, width: 160mm, height: 109mm. ★Front and rear suspension are coil sprung and offer smooth motion. ★Steering wheel operates front wheels via a rack and pinion mechanism. ★The V8 engine is recreated in style, complete with depictions of fine details such as fuel lines and ignition cables. ★Front cowling, cockpit fairing and induction box components can be removed after assembly. ★Photo-etched parts and faux cloth stickers make for realistic renderings of the seatbelt. ★Quality Cartograf decals are included, and allow depiction of either the No.7 or No.8 car. ★Includes synthetic rubber tires and soft plastic depictions of seats and drive shaft boots.

Information is current as of April 28, 2021. Specifications are subject to change without notice.

Nissan Fairlady 240ZG

Monday, 07 June 2021 11:54 Published in Tamiya

1/24 Sports Car Series no.360

Nissan Fairlady 240ZG

Item No: 24360

An Ageless Classic
Nissan Fairlady Z is a masterpiece of Japanese sports cars history. The initial model S30 type was a massive success, with global sales of about 0.52 millilon units; in 1971, the Fairlady 240ZG was released as the top-grade model. 240ZG featured the "Aerodyna nose" with integrated bumper, over fenders and individual headlamp covers, plus thrilling performance with a 2.4-liter engine. This car is still popular among sports car fans in the modern day.

About the Model
This is a 1/24 scale plastic model assembly kit. Length: 179mm, width: 71mm, height: 53mm. ★Features a realistic depiction of the long nose fastback coupe form with short deck. ★2.4-liter inline-6 engine has depictions of the twin carburetors, oil pan and transmission, and the hood is openable to show the engine even after assembly. ★Window frame and headlamp cover rims are metal-plated. ★Wheels consist of three separate parts for easy painting.

Information is current as of May 8, 2021. Specifications are subject to change without notice.

1/35 Military Miniature Series no.378

German Tank Panzerkampfwagen IV Ausf.G (Early Production)

Item No: 35378

Long Barrel Gun in Action
Throughout WWII, the Pz.Kpfw.IV was the main battle tank for the German Army, and after the German invasion of the Soviet Union, the Ausf.G. with L/43 7.5cm KwK40 gun was developed to counter overpowering Russian tanks such as the T-34. In total, 1,930 were manufactured between March 1942 and June 1943. Its equipment varied depending on the production period and the early production tank featured a shorter barrel and rounded muzzle brake. The Ausf.G. was active at the Eastern Front and in North Africa, and was a constant threat to Russian and British Forces on account of its superlative penetration and long gunshot. British troops nicknamed the Ausf.G. employed by Rommel's Africa Corps the "Mk.IV Special."

About the Model
This is a 1/35 scale plastic model assembly kit. Length: 187mm, width: 82mm. ★Exhaustive studies of the actual tank enabled this precise recreation of the powerful form equipped with the L/43 7.5cm KwK40 gun. ★Features varied accessories such as sand bags, jerry cans and spare tracks to recreate a modified version seen at the African Front. ★Assembly type tracks feature one-piece straight sections and a jig to help realistically depict upper run 'sag.' ★Includes four full figures (commander, gunner, loader and infantry) and one torso driver figure. ★Choose between two types of decals: North African and Eastern Front.

Information is current as of April 28, 2021. Specifications are subject to change without notice.

1/48 McDonnell Douglas™ F-4B Phantom II™

Monday, 07 June 2021 11:46 Published in Tamiya

1/48 Aircraft Series no.121

1/48 McDonnell Douglas™ F-4B Phantom II™

Item No: 61121

Legendary Aircraft
The deployment of the F-4 Phantom II started in the early 1960s and over 5,000 were manufactured during its production run. The F-4 Phantom II was operated by not only the Navy and Air Force in America, but also other countries on account of its long range and superlative loading capacity. In 1952, the Navy desired a supersonic aircraft and while the F-8 Crusader produced by the Vought Aircraft Industries, Inc. was employed, the McDonnell Aircraft Corporation continued to develop a two-seater interceptor with powerful dual engines. This aircraft equipped four each of AIM-7E Sparrows and AIM-9G/H Sidewinders, and was officially adopted as the F4H-1 in December 1958 (which was later renamed the F-4A). The F-4B's production started in 1961 and its delivery began with the Fighter Squadron VF-74. In 1965, two F-4Bs shot down two North Vietnamese MiG-17 each, but the most enemy kills in the early stages of the Vietnam War were carried out by the F-8. However, from Operation Linebacker in 1972 onward, F-4 deployment increased and it was operated for air-to-ground strikes. After that, various kinds of F-4 aircraft were developed and some have even been in service with some countries for half a century.

About the Model
This is a 1/48 scale plastic model assembly kit. Fuselage length: 370mm, wingspan: 244mm. ★Exhaustive studies of the actual aircraft enabled this precise recreation of the distinctive form. ★The parts breakdown offers ease of assembly. ★J79-GE-8 engine nozzles, cockpit, and landing gear bays are realistically recreated. ★Choose between folded and extended wingtips. ★One-piece horizontal stabilizer right and left sides move in concert. ★Choose between open and closed canopy, and extended and retracted refueling probe/boarding ladder. ★Different types of antennae and cockpit consoles can be chosen depending on the marking option selected. ★Air-to-air missiles (AIM-7E Sparrow and AIM-9G/H Sidewinder) and two types of drop tanks are included. ★Includes 2 sitting crew figures, 3 marking options, and masking stickers.

Information is current as of April 26, 2021. Specifications are subject to change without notice.

1/48 Scale F-4 Phantom II™ Decal Set A

Monday, 07 June 2021 11:41 Published in Tamiya

Detail-Up Parts Series no.92

1/48 Scale F-4 Phantom II™ Decal Set A

Item No: 12692

Add a whole extra layer of super-detailing to your 1/48 scale F-4 Phantom II kit with this set, which includes decals to recreate the numerous numbers and cautions found on the aircraft's access doors. Also included are decals to recreate yellow canopy rain seals, as well as adding details to engine nozzles.

★Decal sheet dimensions: 150mm x 165mm. ★Compatible with Item 61121 1/48 McDonnell Douglas™ F-4B Phantom II™

Information is current as of April 26, 2021. Specifications are subject to change without notice.

Hyper-Dash 3 Motor J-Cup 2021

Monday, 07 June 2021 11:37 Published in Tamiya

Limited Edition Mini 4WD Product

Hyper-Dash 3 Motor J-Cup 2021

Item No: 95141

★A special version of the Hyper-Dash 3 motor released to commemorate Japan Cup 2021. ★Packaging and motor label are emblazoned with JAPAN CUP 2021 wording. ★The motor offers highly-efficient, durable and balanced performance thanks to silver carbon brushes.
*8T pinion gear is sold separately.

★Input voltage: 2.4-3.0V
★Torque at recommended load: 1.4-1.9mN-m
★RPM: 17,200-21,200
★Current consumption: 1.6-3.0A

Compatible Cars
Mini 4WD cars

Information is current as of April 26, 2021. Specifications are subject to change without notice.

Hyper-Dash Motor PRO J-Cup 2021

Monday, 07 June 2021 11:35 Published in Tamiya

Limited Edition Mini 4WD Product

Hyper-Dash Motor PRO J-Cup 2021

Item No: 95142

★A special version of the Hyper-Dash 3 PRO motor released to commemorate Japan Cup 2021. ★Packaging and motor label are emblazoned with JAPAN CUP 2021 wording. ★The motor offers highly-efficient, durable and balanced performance thanks to silver carbon brushes. ★8T pinion gears are sold separately.

★Input voltage: 2.4-3.0V
★Torque at recommended load: 1.4-1.9mN-m
★RPM: 17,200-21,200
★Current consumption: 1.6-3.0A

Compatible Cars
Mini 4WD PRO cars

Information is current as of April 26, 2021. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Multi Roller Setting Stay (1.5mm) J-Cup 2021

Item No: 95144

★This commemorative stay is released in honor of the Japan Cup 2021, and features blue printed logos. ★Crafted in 1.5mm thick carbon fiber material, it has holes that allow positioning of 9mm, 13mm and 19mm rollers in wide positions.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars
*Some chassis and bodies may require modifications.

Information is current as of April 26, 2021. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Rear Multi Roller Setting Stay (1.5mm) J-Cup 2021

Item No: 95145

★This commemorative stay is released in honor of the Japan Cup 2021, and features blue logos. ★Crafted in 1.5mm thick carbon fiber material, it has holes that allow positioning of 9mm, 13mm and 19mm rollers in wide positions.

Compatible Cars
MA, MS, VZ, FM-A, AR, VS, Super-II, Super X, Super XX and Super TZ-X Chassis cars
Some chassis and bodies may require modifications.

Information is current as of April 26, 2021. Specifications are subject to change without notice.

HG Carbon Rear Brake Stay (1.5mm) J-Cup 2021

Monday, 07 June 2021 11:27 Published in Tamiya

Limited Edition Mini 4WD Product

HG Carbon Rear Brake Stay (1.5mm) J-Cup 2021

Item No: 95146

★This commemorative plate is crafted in lightweight and tough 1.5mm thickness carbon fiber material, with a design that causes minimal roller disruption. ★Use it to mount brake sponge for that extra edge on undulating circuits. It also has holes for attachment of mass dampers, etc. ★Screws and other small components for attachment are included.

Compatible Cars
MA, MS, VZ, FM-A, AR, VS, Super-II, Super X, Super XX and Super TZ-X Chassis cars

Information is current as of April 26, 2021. Specifications are subject to change without notice.

Page 2 of 3

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday1850
mod_vvisit_counterYesterday2760
mod_vvisit_counterThis week1850
mod_vvisit_counterThis month4610
mod_vvisit_counterAll6053570

Who's Online

We have 364 guests online