TQ R/C & Hobbies

Special Edition R/C Product

1/10 R/C The Grasshopper Candy Green Edition

Item No: 47348

**Please note that this product was formerly released as Item 84331. The specifications remain the same.**

Let the Grasshopper brighten up your track!
The Grasshopper is a 2WD racing buggy well-loved by beginners and veterans alike for its ease of assembly and excellent drivability, and at home both on- and off-road. Now, its durable plastic one-piece molded body comes in the vivid and glossy TS-52 Candy Lime Green color, and has been given a top-coat to really make sure that it is resistant to wear and tear. Apply the stickers and hook up the lights, and the body is ready to go! Paint the included driver torso figure as you like for the final touch.

Simple But Tough 2WD Chassis
The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable resin body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough terrain. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip on dirt tracks.

Specifications
●Length: 389mm、Width: 223mm、Height: 135mm ●Weight: 830g ●Type 380 Motor (Also compatible with separately-sold Type 540 motors) ●Rear-wheel 2WD ●3-Bevel Differential ●Suspension: Swing Axle (Front) & Rolling Rigid (Rear)　●Front/Rear Friction Dampers ●Tire Width/Diameter: 21/73mm (Front), 41/82mm (Rear)　●3-Piece Assembly Wheels ●Straight Ribbed Racing Rubber Front Tires ●Rubber Paddle Rear Tires ●Front and rear axles compatible with ball bearings (sold separately) ●Steering Rod with ball adjuster ●Reinforced Resin Bumper ●Requires an Electronic Speed Controller (sold separately)

Separately Required Items
●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

Information is current as of June 7, 2017. Specifications are subject to change without notice.

Electric R/C Car Series no.606

1/10 R/C Alfa Romeo 155 V6 TI Martini (TT-02)

Item No: 58606

At Home on the Circuit
This R/C model assembly kit recreates the racy Martini sponsored Alfa Romeo 155 V6 TI, which featured a purpose-developed 450hp-plus 2.5-liter V6 engine mounted in the front, and paired with a 6-speed semi-automatic transmission. A hi-tech flavor was added by electronically controlled front, central and rear diffs, traction control and ABS. It remained in contention for the prestigious 1996 International Touring Car title until the final race. The model artfully captures the form of the car, with large front bumper spoiler and bulging front/rear fenders. Stickers are included in the kit to recreate the unmistakable livery of the car.

Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Fin-type wheels are paired with racing slick tires.

Specifications
●Length: 462mm, Width: 185mm, Height: 138mm ●Wheelbase: 257mm　●Tire Width/Diameter: 27/67mm (Front & Rear) ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ●Type 540 Motor ●Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is current as of February 25, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Stainless Steel Countersunk Screw Set (10/12/20/25/30mm, Black)

Item No: 95415

★Flat-headed countersunk screws are perfect for use on plate undersides, as they sit flush to the surface without catching on any obstacles. ★This set includes four 10mm, six 12mm, two 20mm, four 25mm and four 30mm screws, finished in a cool shade of black. ★Make guide holes using Item 74130 Electric Router Countersink Bit (for 2mm Screws).

Compatible Cars
Mini 4WD and Mini 4WD PRO cars.

Information is current as of August 17, 2018. Specifications are subject to change without notice.

Mini 4WD Product

Aluminum Spacer Set (12/6.7/6/3/1.5mm, 2pcs. each) (Black)

Item No: 95481

★The five lengths of spacer in this set will be mightily useful in customizing and upgrading your Mini 4WD car! ★They are given a black anodized finish that will suit them to use with a range of body and chassis colors. ★Examples of use include on rollers, rear stay, brake and more. ★Contains 2 of each length. ★Inner diameter: 2.1mm, outer diameter: 4mm.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars

Information is current as of February 1, 2019. Specifications are subject to change without notice.

Mini 4WD Product

HG Mass Damper Set w/Ball Connectors (Block Weight/Carbon Plate)

Item No: 95387

★The mass damper in this set comes with ball connectors. It is perfect for use on courses with repeated elevation changes. ★1.5mm thickness carbon fiber plate has white lettering print. ★Adjusters are molded in red glass fiber-reinforced resin.

Compatible Cars
MA and AR chassis cars.
MS, FM-A, VS, Super-II, Super X, Super XX and Super TZ-X cars fitted with Item 15430 FRP Rear Multi Roller Setting Stay.
Some bodies may require modifications.

Information is current as of March 5, 2018. Specifications are subject to change without notice.

Mini 4WD Product

Mini 4WD HG Aluminum Setting Board (Black)

Item No: 95507

★The popular aluminum setting board is now available in highly versatile black! ★Features scales to allow measurement of Mini 4WD car length, width, tire diameter/width and more. ★Can be used in conjunction with separately available setting gauge to measure minimum ground clearance.

Information is current as of May 14, 2019. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

Rubber Body Catches (Black, Yellow) Mini 4WD Station

Item No: 95492

★These compact, easy-use components allow quick, secure attachment of body to chassis. ★They are lighter than kit standard resin components, contributing to a lighter overall car. ★Contains four of each color.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars

Information is current as of June 6, 2019. Specifications are subject to change without notice.