TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C Terra Scorcher (2020)

Thursday, 07 May 2020 16:51 Published in Tamiya

Special Edition R/C Product

1/10 R/C Terra Scorcher (2020)

Item No: 47442

★This is an updated re-issue version of the Terra Scorcher which was first unleashed on the world in 1988. ★4-wheel independent double wishbone suspension is equipped with CVA oil dampers. ★Universal drive shafts provide efficient power and superior durability. ★Features new aluminum motor mount.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Hub Nuts for Single Wheels (Black, 2pcs.)

Thursday, 07 May 2020 16:40 Published in Tamiya

Truck Option Parts Series no.56

Hub Nuts for Single Wheels (Black, 2pcs.)

Item No: 56556

About the Model
★Used in place of kit-standard 4mm flanged nuts, these aluminum hub nuts give a realistic look to take your model to the next level. ★Tighten using kit-included wrench. ★Aluminum components have a matte black finish.

Information is current as of April 3, 2020. Specifications are subject to change without notice.


Limited Edition Mini 4WD Parts

SUPER X NUT FASTENED RED PLATED WHEELS S & ARCHED TIRES (w/LOW FRIC. WASHERS)

Item No:94730

★These red metal-plated nut fastened wheels are secured to the shaft with nuts, preventing wheels from coming off during driving. ★Included hard tires are ideal for technical course. ★Low-friction fluorine coated resin washers are also included (8 pcs.).

ROLLER ANGLE ADJUSTER PLATE (CARBON REINFORCED)

Friday, 07 January 2011 13:52 Published in Tamiya

Limited Edition Mini 4WD Parts

ROLLER ANGLE ADJUSTER PLATE (CARBON REINFORCED)

Item No:94729

★These roller angle adjuster plates are made of carbon-reinforced nylon resin. ★These plates feature high rigidity and have a beautiful carbon texture. ★Roller angle can be adjusted by 1 degree increment from -3 to +3 degrees.

Specifications and information coming soon.

LASER-GILL SUPER XX SPECIAL

Friday, 07 January 2011 13:47 Published in Tamiya

Limited Edition Mini 4WD

LASER-GILL SUPER XX SPECIAL

Item No:94719

★This Mini 4WD car is a special version of the famous Laser-Gill. ★The prism blue body features metallic stickers. ★The Super XX chassis is made of carbon-reinforced nylon resin and features greater rigidity. ★Dark blue arched tires are mounted on fluorescent green wheels.

Specifications are subject to change without notice.

HG ALUMINUM LARGE DIA. NARROW WHEELS (BLUE, 4PCS.)

Friday, 07 January 2011 13:44 Published in Tamiya

Limited Edition Mini 4WD parts

HG ALUMINUM LARGE DIA. NARROW WHEELS (BLUE, 4PCS.)

Item No:94732

★Blue-anodized aluminum wheels for Mini 4WD cars. ★These high-precision, durable wheels help to stabilize your machine and keep it on track and are less likely to deform against strong shocks.

JAPANESE NAVY KOMATSU G40 BULLDOZER

Friday, 07 January 2011 13:38 Published in Tamiya

1/48 Military Miniature Series No.65

JAPANESE NAVY KOMATSU G40 BULLDOZER

Item No:32565

【 The First Japanese Bulldozer 】 The Komatsu G40 was produced for the Japanese Navy during WWII and had the distinction of being Japan's first ever domestically-produced bulldozer. It was developed as a means to speed up airfield construction, which had up to that point been done by hand. Komatsu based its design on their existing farm tractor and it was equipped with a 50hp gasoline engine as well as a hydraulic dozer blade. About 150 were built from 1943 to the end of the war and they were sent to engineering units in the northern and southern fronts. It also influenced the design of postwar Japanese construction machinery.

【 About the Model 】 ★1/48 scale model of the Komatsu G40 Bulldozer. Length: 75mm. ★Accurately reproduced based on thorough research of the actual vehicle. ★Detailed mechanisms such as the hydraulic lines give the model a distinctive air. ★IJN emblem on the front grille is realistically depicted by a metal transfer. ★1 driver figure included.

The information on this page is current as of March 5, 2010.

WWII U.S. Field Maintenance Yard (w/2 Figures)

Friday, 07 January 2011 13:33 Published in Tamiya

1/35 Limited Edition

WWII U.S. Field Maintenance Yard (w/2 Figures)

Item No:25106

【 For A Wide Diorama Possibilities 】 During WWII, the U.S. army set up simple maintenance yards at frontlines to enable quick repair of their vehicles. A variety of tools including simple cranes to lift light vehicles, gas cylinders for welding, and painting compressors were prepared for fixing small vehicles, light trucks, and even AFVs. From the German invasion onwards, these maintenance yards were significant for Allied forces at European fronts.

【 About the Model 】 ★This 1/35 scale plastic assembly kit depicts the U.S. army's vehicle maintenance yard. ★Set depicts a variety of tools and accessories including simple crane, work bench, compressor, gas cylinder with welding torch, jack, and drum can. ★2 soldier figures with relaxed poses included. ★This set is ideal for displaying with a wide selection of U.S. vehicles. It can also be used in British and German diorama situations. ※Accessory parts are product of Italeri.

Specifications are subject to change without notice.

M4A2(76)W Sherman “Red Army” (w/6 Figures)

Friday, 07 January 2011 13:29 Published in Tamiya

1/35 Limited Edition

M4A2(76)W Sherman “Red Army” (w/6 Figures)

Item No:25105

【 Sherman in the Soviet Army 】 The M4A2 Sherman was among many weapons which the U.S. provided to Russia via the Lend-Lease Act during WWII. The first Shermans were sent to Russia in late-1942 had 75mm guns, while the M4A2(76)W sent from late-1944 were armed with 52 caliber 76mm guns. These tanks were praised by their Russian crews for their reliability and powerful armament. They were deployed to such elite units as the 9th Guards Mechanized Corps, which took part in offensives towards Budapest and Vienna, and the 8th Mechanized Corps, which was involved in the Battle of Berlin.

【 About the Model 】 This is a 1/35 scale plastic model set of the M4A2(76)W Sherman used by Soviet army and 6 tank crew figures. Tank model length: 169mm ★The tall silhouette of the Sherman with a powerful 76mm gun has been accurately reproduced. ★Tank crew figures including a female crew member feature realistic relaxed poses. ★4 kinds of markings to depict the tank from the Soviet army included. ※Tank parts are product of Italeri.

Specifications are subject to change without notice.

1/35 Scale Limited Edition

German Tiger I Late Version w/Ace Commander And Crew Set (8 Figures)

Item No:25109

【 Includes an Assortment of Figures and Decals 】 The greatest menace to the Allied forces during WWII was the powerful German Tiger I tank. It was thought that one Tiger tank had an offensive power equal to that of five Sherman tanks. The tank weighed 57 tons, had a 100mm thick frontal armor, and featured a powerful 56 caliber 88mm gun which could penetrate 100mm armor at a distance of 2,000m. Its splendid performance led to the advent of many famous ace commanders such as Michael Wittmann. Production began from July 1942 and over 1,300 units were produced overall, and the late production models featured improvements including a more powerful engine, periscope on the cupola, and pressed-steel road wheels.

【 About the Model 】 ★1/35 scale plastic assembly kit model of the German Tiger I late production with 8 figures. Length: 241.5mm, Width: 106mm. ★The heavy form of the tank with vertical armor plates realistically reproduced. ★The turret's loading section as well as hatch's underside have a detailed finish. ★Link type resin assembly tracks included. ★The main gun which featured a smaller muzzle brake system seen on late production models also included. ★3 commander and 5 tank crew figures as well as a wide variety of decals to depict unit markings and vehicle numbers included.

Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

Social sharing

Who's Online

We have 333 guests online