TQ R/C & Hobbies

1/35 Military Miniature Series No.335

German Self-Propelled Heavy Anti-Tank Gun Nashorn

Item No: 35335

8.8cm of Destructive Power
The self-propelled heavy anti-tank gun Nashorn packed a formidable punch courtesy of a mammoth 71-caliber 8.8cm Pak43/1 gun which was one of the largest on the battlefield in WWII. The vehicle was developed in all possible haste after the German Army had the unexpected surprise of meeting such overpowering opponents as the T34 and KV-1 upon its invasion of the Soviet Union. The recently-developed III/IV vehicle was used as a base for the Pak43/1 gun, which was capable of destroying enemy tanks from great distance. Top road speed was 42km/h thanks to its relatively light weight of 24 tons. While deployment started in July 1943 under the moniker of Hornisse, it was given the new Nashorn designation from January of the next year, reportedly at the command of Hitler. 439 units were produced up to March 1945, and they served on both the Eastern and Western Fronts, providing heavy firepower for German forces.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length: 241mm, Width: 84mm. ★Extensive research and study of actual vehicles led to this accurate recreation of the imposing form of the Nashorn with long 8.8cm main gun. ★Features of post-May 1943 vehicles such as late production gun travel lock, muffler-less exhaust pipes and more are faithfully depicted. ★Metal parts are used to allow realistic elevation and depression of the main gun. ★Belt-type tracks. ★4 figures in winter uniform are included, and can be placed in the large fighting compartment to add a further air of authenticity to the model. ★Comes with 3 marking options, including Eastern Front vehicle markings.

The information on this page is correct as of February 7, 2014. Specifications are subject to change without notice.

1/48 Military Miniature Series No.79

U.S. 2 1/2ton 6x6 Airfield Fuel Truck

Item No: 32579

★The 1/48 Scale Military Miniature Series welcomes the U.S. 6x6 fuel truck, which was put to work in WWII refueling aircraft, servicing engines, and more. ★The model faithfully replicates the form of the truck with hard-top cabin roof and large tank. ★Tank side doors can be installed in open or closed position, and when open show off the detail on the hose and reel. ★2 figures depicted in the act of refueling, plus 2 marking options are included. *Vinyl tubing is used to recreate the fuel hose.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notification.

Mini 4WD REV Series No.5

Flame Astute (AR Chassis)

Item No: 18705

★With its exciting tapered body style and aerodynamically-styled front wing and rounded wing end plates, the Flame Astute is one cool-looking customer! ★Metallic stickers are included in the kit. ★The aerodynamically-advanced AR chassis provides the platform for this exciting kit. It features low-friction under panel and diffuser. ★Gear ratio = 3.5:1

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Slash Reaper Clear Red Special (AR Chassis)

Item No: 95009

★This special limited edition version of the Slash Reaper sees a fashionable clear red body combined with a white model of the aerodynamically-efficient AR chassis. ★Battery holder and other A parts are molded in low-friction light grey. ★Matte finish red metal-plated wheels are fitted with grey hard tires. ★Includes sticker set and 4.2:1 ratio gear.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Grade Up Parts Series No. 476

Basic Tune-Up Parts Set for MA Chassis

Item No: 15476

★Get updating your MA chassis, and aim for the top of the race rankings with this tune-up parts set! ★The set includes front/rear FRP plates, 13mm low-friction rollers, 4 adjustable mass dampers, stabilizer ball heads and small parts for use in attachment. ★The front FRP plate is compatible with 9, 11, 13 and 19mm rollers, and the rear plate with 9, 11, 13, 17 and 19mm.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

HG Carbon Reinforcing Plate for 13/19mm Roller (2mm/Red Lamé)

Item No: 95008

★This version of the versatile 2mm-thick straight-type reinforcing plate features a sparkling red finish. ★Compatible with 13mm and 19mm rollers.★

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Brake Set (for AR Chassis) (Red)

Item No: 95011

★These red racing parts for the AR chassis include 2 pre-cut 5mm brake sponges of differing friction quality. The stay has a skid-shaped front to ensure that sponge remains attached, and it has the effect of reducing speed loss on Mini 4WD course grass sections. 2-level rollers cushion jump landings to ensure that the machine stays on the track surface and away from the fence. Brake set effects can be adjusted by altering the attachment direction, and also the height through the use of different spacer and screw combinations. This set is compatible with both small- and large-diameter tires.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Thunder Shot Mk.II Clear Body Set II

Item No: 95015

★Get a head-start on the opposition with this lightweight clear body set! The unmistakable form of the Thunder Shot Mk.II with integrated nose and 3-tier wing is now reproduced in durable clear polycarbonate. The lightweight body allows for a lower center of gravity. ★Includes marking stickers to decorate the body. Compatible with Mini 4WD PRO machines.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Avante Mk.III Azure Clear Body Set II

Item No: 95016

★Get a head-start on the opposition with this lightweight clear body set! The form of the Avante Mk.III Azure is now reproduced in durable clear polycarbonate. The lightweight body allows for a lower center of gravity. ★Includes marking stickers to decorate the body. Compatible with Mini 4WD PRO machines. ★Blue metallic stickers provide a stylish accent.

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.

Limited Edition Mini 4WD Product

Mini 4WD Tire Storage Box Set (2014)

Item No: 95017

★This handy storage box can store up to 28 tires of up to 31mm in diameter, and also includes a handy set of 5 compartments in the center for storing screws and other small parts. It's a great way to keep all of your parts organized! ★Fits neatly inside the Mini 4WD portable pit. ★Dimensions: 173 x 92 x 35mm

The information on this page is current as of February 7, 2014. Specifications are subject to change without notice.