TQ R/C & Hobbies

1/48 Military Miniature Series No.84

German Tank Panzerkampfwagen IV Ausf.H Late Production

Item No: 32584

★This is a 1/48 scale plastic model assembly kit of the Panzerkampfwagen IV Ausf.H variant which appeared in the latter half of WWII. ★The distinctive Schürzen armor plates on hull sides and turret are accurately captured. ★Faithfully recreates other points such as the engine muffler, late production type tracks, plus upper road wheels and idler wheels. ★Commander torso figure is included, along with 2 marking options. ★Features link-type assembly tracks with 1-piece straight sections.

Information is correct as of February 5, 2015. Specifications are subject to change without notice.

Detail Up Parts Series No.61

Zimmerit Coating Sheet for 1/48 Scale Panzer IV Ausf.H

Item No: 12661

★Recreate Zimmerit anti-magnetic mine coatings on your 1/48 scale Panzer IV Ausf.H model using this handy sheet! ★Simply cut out and apply to the model, painting over the top of them.

The information on this page is current as of February 6, 2015. Specifications are subject to change without notice.

1/32 Racing Mini 4WD Series No.84

Mini 4WD Panda Racer

Item No: 18084

★What better than a panda - darling of the zoological world - to add some cuteness to your Mini 4WD life? ★Adorable figure comes pre-assembled and painted. ★The orange buggy-style body features a roll bar, plus separate rear wing parts.
★The durable and adaptable Super-II chassis provides a solid base, and comes with white large-diameter wheels plus fetching blue tires! ★Gear ratio = 5:1.

Information is correct as of February 5, 2015. Specifications are subject to change without notice.

Fully-Cowled Mini 4WD Series No.44

Beat-Magnum Premium (AR Chassis)

Item No: 19444

Drive to a Premium Beat!
This plastic Mini 4WD model assembly kit is a premium release of the Beat Magnum, which was driven by none other than hero Go Seiba in the Japanese Mini 4WD cartoon "Let's & Go!!" The eye-catching body features smaller front and rear fenders, plus inimitable "dragon suspension" on either side of the cockpit. Fittingly for a high-speed racer, it uses an oversized, flat rear wing. The white molded plastic body can be decorated with metallic stickers included in the kit. Metallic grey color AR chassis parts are complemented with blue low-friction under panel and diffuser pieces, with the jazzy finishing touch provided by fluorescent green 5-spoke wheels mounting slick tires.

AR Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The air intakes on the chassis and body are integrated for optimal performance. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.

Specifications
★Length: 155mm ★Width: 97mm ★Includes motor ★Snap-together easy assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of February 27, 2015. Specifications are subject to change without notice.

Grade Up Parts Series No. 480

Neo-Tridagger ZMC Clear Body Set (Polycarbonate)

Item No: 15480

★This Neo Tridagger ZMC clear body will contribute to a lighter-weight car, and a lower center of gravity. ★It is made from polycarbonate material, which offers excellent durability against shocks and crashes. Mount parts are made from ABS resin. ★Includes special clear-type stickers.

Information is correct as of February 6, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Mini 4WD HG Aluminum Setting Board (Gold)

Item No：95201

★The popular aluminum setting board is now available in a flashy gold color! ★Features scales to allow measurement of Mini 4WD car length, width, tire diameter/width and more! ★Can be used in conjunction with separately available setting gauge to measure minimum ground clearance.

Information is correct as of March 4, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Stabilizer Ball Cap Set (Mini 4WD Station)

Item No：95206

★Add a splash of color to your Mini 4WD car with these vibrant stabilizer ball caps. The set includes 4 each of 5 colors, plus rubber tubing for use when attaching.

Information is correct as of March 4, 2015. Specifications are subject to change without notice.

Mini 4WD Product

Basic Mini 4WD Car Box (Mini 4WD Station)

Item No：95207

★Simply fold together this box and hey presto! You now have a container whose interior measurements (roughly 105mm x 165mm) correspond with the official Mini 4WD regulations, allowing you to check that your car complies. ★Fits neatly into the upper section of the separately sold Mini 4WD Portable Pit.

Information is correct as of March 4, 2015. Specifications are subject to change without notice.

Craft Tool Series No.121

Mini 4WD (＋) Screwdriver PRO

Item No: 74121

★This shorter screwdriver is ideally suited to the construction of smaller models such as Mini 4WD racer kits. ★The high-precision machined magnetic bit ensures that your screws are attached securely. ★Features an ergonomic non-slip grip.

Information is correct as of February 6, 2015. Specifications are subject to change without notice.

Craft Tool Series No.122

Modeler's Punch (2mm/3mm)

Item No: 74122

★Use this handy tool to punch out circular pieces of masking tape, or plastic plate up to 0.5mm in thickness. ★Features a rotating grip. ★Exchange 2mm and 3mm bits with ease.

Information is correct as of February 25, 2015. Specifications are subject to change without notice.