TQ R/C & Hobbies

Limited Edition R/C Product

1/10 R/C The Bigwig (2017)

Item No: 47330

★This re-release version of The Bigwig R/C off-road car assembly kit features a chassis with a number of updates while keeping largely to that used on the original released in 1986. ★The Takuya Yura-designed body still looks as inspiring as ever! ★Features a shaft-driven 4WD chassis with full ball bearings for minimal power loss. ★The 25T GT-Tuned Motor features a decorative label unique to this kit. ★Utilizes a distinctive rack and pinion steering system.

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

Electric R/C Car Series No.642

1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E Chassis)

Item No: 58642

★Take a look at our latest racing truck model, which recreates the Team REINERT Racing vehicle from the 2016 racing circuit. ★Comes with a superbly realistic polycarbonate 4-piece body that even has depictions of engine exterior and turbo components. ★The model is based upon the TT-01 Type-E chassis, and comes with wheels and tires designed especially for our R/C racing truck models.

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

1/48 Military Miniature Series No.89

German Heavy Tank Destroyer Elefant

Item No: 32589

A 1/48 Heavyweight
With a powerful 8.8cm gun capable of taking out Russian T-34s and KV-1s from range, plus armor up to 200mm thick, the Elefant heavy tank destroyer was a formidable prospect. Originally named the Ferdinand, 90 were produced by May 1943 and in their first combat action in the Battle of Kursk that July, they are said to have accounted for over 500 Russian tanks. However, after Kursk they were withdrawn for an overhaul and came back in February 1944 re-named the Elefant. They were active in Italy and on the Eastern Front, even being thrown in to the defense of Berlin as WWII drew to a close in Europe.

About the Model
This is a 1/48 scale plastic model assembly kit of the Elefant heavy tank destroyer. Length: 172mm, width: 71mm. ★The boxy form with long 8.8cm gun is recreated with aplomb. ★Fighting compartment parts breakdown is based upon weld joints on the actual AFV. ★Assembly-type tracks have single-piece straight sections. ★Commander torso figure and 1 marking option are included in the kit. ★Hull weights give the model a realistically heavy feel.

Information is correct as of February 15, 2017. Specifications are subject to change without notice.

Detail Up Parts Series No.71

Zimmerit Coating Sheet for 1/48 Scale Elefant

Item No: 12671

★This coating sheet is designed for 1/48 scale Elefant models. ★Simply cut out the 3D pattern pieces from the sheet and apply to your model for a highly effective finish! ★Can be painted on.

This product is compatible with Item 32589.

Information is correct as of February 15, 2017. Specifications are subject to change without notice.

Limited Edition Static Model Products

1/35 Israeli Tank M51 (w/Aber Photo-Etched Parts)

Item No: 25180

★This exciting set pairs Tamiya's model of the Israeli M51 with photo-etched parts from renowned maker Aber. ★Finely detailed parts such as M2 heavy machine gun barrel add a highly impressive layer of realism to an already-detailed kit.

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

1/24 Sports Car Series No.124

Mitsubishi Montero with Sport Options

Item No: 24124

Weigh up Your Options
Mitsubishi's popular Montero (Pajero) line of vehicles first appeared in 1982, and in January 1991 received a full model change. Among the numerous variants released was this car - the top-class VR, which was powered by a 155hp 3-liter V6. Its Super Select 4WD drivetrain furnished a choice of full-time 4WD and two part-time 4WD modes, plus a 2WD setup. Front double wishbone and rear 3-link suspension made for superb off-road ability. This kit depicts the Montero with a number of customized parts such as front bull bars, quad roof lamps, and more!

About the Model
★This is a 1/24 scale plastic model assembly kit which recreates the Mitsubishi Montero VR with customizing option parts. Length: 209mm, width: 86mm. ★Option parts such as bull bars, rear ladder, roof-top lamps and wheels are given a luxurious metal-plated finish. ★Clear hood parts can be left unpainted to give good look at the detail in the engine room underneath. ★Features an accurate rendering of the ladder frame chassis, with realistic depictions of the 4WD drive train and durable ABS resin suspension parts. ★The long-stroke suspension is movable thanks to the use of metal coil springs. ★Solid synthetic rubber tires have realistic tread patterns. ★Parts for left- and right-hand drive cars are included.

Information is correct as of February 3, 2017. Specifications are subject to change without notice.

Mini 4WD Product

MaxBreaker CX09 Black Special

Item No: 95294

The Special One
This is a plastic Mini 4WD racer assembly kit which creates the MaxBreaker CX09 Black Special edition. A Smoke color ABS resin body is combined with dedicated orange and red graphic stickers (included in kit). The Super X chassis and wheels are molded in durable carbon fiber-reinforced nylon resin. A gray gear cover is also included. Comes with white large-diameter slick tires.

Specifications
★Length: 156mm ★Width: 92mm ★Height: 44mm ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2) ★Motor

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

Mini 4WD Product

Jolly-Joker Premium (AR Chassis)

Item No: 95298

Jolly Nice to Meet You Again...
This is a premium version of the Jolly-Joker, a model which first appeared in the Truckin' Mini 4WD Series back in 1990. It cuts a cool figure with its lowered-down truck body finished in black with smoke-colored tinted windows. The car's markings and number are depicted using stickers included in the kit. It is based on the AR chassis, which includes screw-attached side catch mounts to enable the attachment of the Jolly-Joker body. The motor and batteries can be attached and detached without removing the body from the chassis. Different-width front and rear small diameter wheels have wire-type spokes finished in gold and are mounted on slick tires.

AR Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are key ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. This high-speed racing chassis also features low-friction plastic bearings to ensure that any loss of power from the engine to the wheels is minimal in nature. The under panel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.

Specifications
★:Length: 155mm ★:Width: 97mm ★:Height: 55mm ★:Motor included ★:Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

Grade Up Parts Series No. 510

Stainless Steel Countersunk Screw Set (10/12/20/25/30mm)

Item No: 15510

★Countersunk screws have a flat head and (in countersunk holes) can thus be screwed in flat to the surface of the plate, etc. for a smooth finish. ★Contents: 10mm screws x4, 12mm screws x6, 20mm screws x2, 25mm screws x4, 30mm screws x4.

Compatible Chassis
Mini 4WD and Mini 4WD PRO cars
*Only use in countersunk holes.

Information is correct as of February 2, 2017. Specifications are subject to change without notice.

Mini 4WD Product

Adjustable Mass Dampers (2.5g Weights x6)

Item No: 95324

★Mass dampers are a must on courses with numerous elevation changes. This set includes 6 weights for use on mass dampers; mix and match for the desired setup! ★Also included are 2x25mm and 2x30mm screws, 3mm aluminum spacers, stabilizer balls and more.

Compatible Chassis
Mini 4WD and Mini 4WD PRO cars
(some bodies may require modification.)

Information is correct as of February 2, 2017. Specifications are subject to change without notice.