TQ R/C & Hobbies

Hop-Up Options no.1862

Aluminum Servo Step Screws (4pcs.)

Item No: 54862

★These step screws give a great fit and hex holes ensure tight attachment. ★They do not require washers, helping save maintenance time. ★3x8mm screws are given a cool blue anodized finish.

Information is current as of January 31, 2019. Specifications are subject to change without notice.

Hop-Up Options no.1863

Aluminum Hi-Torque Servo Saver Cap

Item No: 54863

★This blue anodized aluminum cap is used in place of Q4 parts in hi-torque servo savers, for good durability. ★Features a cool blue anodized finish.

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

TRF Series no.332

TRF Super Short Big Bore Damper Pistons (Blank/4pcs.)

Item No: 42332

★11mm diameter, 2.1mm thickness polyacetal (POM) low-friction pistons. ★Each piston features 6 indentations, allowing boring of holes to make 2-, 3- or 4-hole pistons. ★Use with Item 42305.

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

TRF Series no.333

TRF419XR Aluminum Lower Deck

Item No: 42333

★2mm thickness aluminum lower deck optimizes the TRF419XR for use on grippy surfaces such as carpet. ★Offers increased rigidity compared with kit-standard carbon fiber component. Slits ensure sufficient flex.

Compatible Chassis
TRF419XR Chassis

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

TRF Series no.334

TRF419XR Carbon Upper Deck (1.75mm Thick)

Item No: 42334

★1.75mm thickness carbon fiber upper deck optimizes chassis roll flex.

Compatible Chassis
TRF419XR Chassis

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

Special Edition R/C Product

TA02 Center One-Way Set

Item No: 47395

★Use this set in place of the standard front counter gear on the TA02 chassis, to achieve a one-way setup. ★Free rotation of the front wheels under braking gear gives the model a more eager feel, plus faster cornering. ★Includes one-way bearing, one-way shaft, 16T gear, bevel gears and 730 ball bearings.

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

Special Edition R/C Product

TA02 FRP Chassis Conversion Set

Item No: 47396

★This set converts the TA02 chassis from a bathtub frame into an FRP plate setup. ★Not only will your car be lighter, the battery position will also be fine-tuned (10mm forwards, 8.5mm to the left) for cat-like balance. ★FRP damper stays are also included, as are spacers and steering linkage parts.

Information is correct as of January 31, 2019. Specifications are subject to change without notice.

1/24 Sports Car Series No.346

Ford GT

Item No: 24346

Honed to Perfection
Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.

Information is correct as of February 1, 2019. Specifications are subject to change without notice.

Tamiya-Italeri Series No.27

1/48 German Heavy Tractor SS-100 & 88mm Gun Flak37 Set

Item No: 37027

Frequent Partners
The SS-100 was a heavy tractor used by German forces from the mid-1930s, originally a commercial design but also effective in military service throughout WWII thanks to an ability to haul up to 20 tons. Among a wealth of candidates, one of its passengers really stands out - the mighty 88mm gun, which was used against Allied forces with devastating effect. The Flak37 was a powerful 1937 variant, with sights updated from predecessors, and a large shield added from 1940.

About the Model
★This is a 1/48 scale plastic model assembly kit set. SS-100 length: 114mm; 88m gun length (towed): 169mm. ★The sturdy SS-100 form is recreated with aplomb. ★Integrated cabin parts make for a fuss-free, accurate assembly. ★The complex Flak37 88mm gun is captured with realism. ★Transport wagon is also depicted. ★Comes with five figures and three marking options.
*88mm gun parts are a product of Italeri.

Information is correct as of February 25, 2019. Specifications are subject to change without notice.

1/35 Military Miniature Series No.39

U.S. M3 Tank Lee

Item No：35039

【 Filling the breach 】 The M3 Lee medium tank was the main U.S. counter to the formidable tank forces available to the German army in the early stages of WWII. Before the M3 Lee was developed, the U.S. forces only had light tanks at their disposal as the 37mm gun M2 was already practically obsolete by the time it was ready for mass production. Given time constrictions, the solution chosen was to attach a 75mm gun to the M2's hull and attach the 37mm gun to a swiveling turret; 7.62mm machine guns were added to a further turret to give the new tank a distinctive 3-level form. It was named the M3. Despite problems such as limited rotation of the 75mm gun and the height of the tank making it rather easy to spot, its powerful weaponry and strong armor made it a highly useful stop gap for the Allied forces. It was also used by the British, who gave it the naming 'Lee' (or 'Grant' for versions with a different turret pattern). With the advent of the M4 Sherman, the M3 Lee saw more action in the Pacific Theater, tussling with Japanese forces until the end of the war.

【 Model Specifications 】 ★1/35 scale plastic model assembly kit of the U.S. medium tank M3 Lee. ★Main gun, 37mm gun and 7.62mm machine guns are all moveable. ★Hatches can be attached in open or closed position according to user preference. ★Features faithful reproduction of armor including panel rivets. ★Complex suspension system is accurately depicted. ★Includes 2 marking options and 1 figure.

The information on this page is current as of September 6, 2016. Specifications are subject to change without notice.