TQ R/C & Hobbies

Special Edition R/C Product

1/10 R/C Fighting Buggy (2014)

Item No: 47304

**Please note that this product was formerly released as Item 84389. The specifications remain the same.**

Back by Popular Demand!
Tamiya is delighted to welcome the Fighting Buggy back to its product line-up with this re-release version of the 1982 R/C buggy classic. It retains the unique suspension and drivetrain setups employed on the original model and pairs them with a newly-designed chassis. The ABS resin body keeps the shape and design theme from its predecessor, accenting it with updated markings. It is equipped with an aluminum roof wing part and side nets for an authentic buggy-esque look.

A Highly Satisfying Off-Road Experience
The original 2mm-thick FRP and duralumin chassis plate is replaced with a new 2.5mm-thick FRP plate, finished in black like the 1.5mm-thick mechanism deck. The model can be powered by the separately sold Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size), which will fit neatly underneath the mechanism deck. Afficionados of the original model will note that the die cast arms remain the same on the 2014 version, while the separate reserve tank is still used on the rear suspension, which otherwise receives a number of new parts. A sealed direct drive gear case also houses the motor and protects it from dust and dirt. Stability is provided by ribbed front tires, and the rear gives excellent grip thanks to tires with tread patterns that extend to the sidewalls. 3-piece wheels are used both front and rear.

Specifications
●Length: 410mm, Width: 230mm, Height: 160mm　●Wheelbase: 250mm　●Tread: 165mm (Front), 180mm (Rear)　●FRP Double Deck Chassis Frame ●Rear Wheel Direct Drive 2WD　●2-Piece Steering Tie-Rod ●Front Suspension: Double Trailing Arm,　Rear Suspension: Swing Axle & Transverse Monoshock ●Tire Width/Diameter: 21/73mm (Front), 49/86mm (Rear) ●Aluminum Oil Dampers　●Full Ball Bearings ●Gear Ratio=10:1 or 6.5:1 ●Type 540 Motor included ●Requires Electronic Speed Controller (ESC) (sold separately)

Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is current as of August 7, 2015. Specifications are subject to change without notice.

Hop-Up Options no.1987

Suspension Mount Shim Set

Item No: 54987

★Used in place of standard 3mm washers, these U-shaped components can be installed or removed without taking out the screw. ★Contains ten each of 0.2mm and 0.3mm thickness spacers. ★The image at right shows an example of attachment of the 0.3mm shim. Use them in conjunction with kit-included washers.

Compatible Chassis
TC-01, M-07 Concept & M-08 Concept Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

Hop-Up Options no.1991

CC-02 Aluminum Dampers (4pcs.)

Item No: 54991

★These hi-spec aluminum dampers give a more realistic look as they are narrower than kit-standard plastic cylinders. ★Attachment using balls at the top maximizes their effective range of motion. ★Includes four each of aluminum cylinders (silver), cylinder caps (gun metal color), O-ring caps and clamp design spring retainers, plus #400 oil.

Compatible Chassis
CC-02 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

Hop-Up Options no.1992

Springs for CC-02 Aluminum Dampers

Item No: 54992

★These springs are for use with Item 54991 CC-02 Aluminum Dampers (4pcs.), and are designed to perfectly suit the CC-02 chassis. ★The product contains two each of three spring types (soft: red tags, medium: yellow, hard: blue), allowing a range of setups.

Compatible Chassis
CC-02 Chassis
*Use with Item 54991 CC-02 Aluminum Dampers (4pcs.).

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

Hop-Up Options no.1993

TT-02B/DF-03 Aluminum Damper Set

Item No: 54993

★These dampers employ precision aluminum cylinders with a low-friction internal coating. ★Fluorine resin pistons further contribute to the smooth motion with mimimal loss. ★Also included are cylinder caps, spring retainers allowing adjustment of spring position, knurled O-ring caps and more. ★Parts are included to make two each of front and rear dampers (total: four).

Compatible Chassis
DF-03 & TT-02B^*1 Chassis
^*1Use with Item 50592 5mm Ball Connector (10pcs.).

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

Hop-Up Options no.1999

M-Chassis 60D Super Radial Tires (Hard/2pcs.)

Item No: 54999

★These M-Chassis tires are of a soft compound, suited best to use on cooler track surfaces (between approximately 25 and 50 degrees Centigrade). ★Use with separately sold inner sponges for optimal effect. ★Please note that different surfaces may cause tire degradation of different speeds. ★The image at right shows a sample fitted to the M-07 Concept Chassis. Note the number 2 on the sidewall signifying hard compound.

Compatible Chassis
MF-01X, M-05, M-05 PRO, M-05 Ver.II PRO, M-06, M-06 PRO, M-07 Concept, M-08 Concept & T3-01 Chassis
Compatible wheels: Items 50569, 50676, 50972, 51237, 51334, 51394 and 51405.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 2, 2021. Specifications are subject to change without notice.

Hop-Up Options no.2000

Reinforced Racing Tires (Medium, 24mm/2pcs.)

Item No: 22000

★These slick touring car tires feature inner mesh to help prevent bulging and ensure grip does not deteriorate. ★For moderate track temperatures (20-35 degrees Centigrade). Guideline temperatures may differ with track conditions. ★Contains two 24mm width medium compound tires. ★The image at right shows a sample fitted to the TRF420 Chassis. Note the number 2 on the sidewall signifying medium compound.

Compatible Chassis
FF-03, FF-03 PRO, FF-04 EVO, F103 GT, TA05 Ver.II, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TA07 MSX, TB-03, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TRF420, TT-02 Type-S & TT-02 Type-SR Chassis
Compatible wheels: Items 50894, 50892, 51022, 51046, 51072, 51299, 53453, 53468, 53471, 53473, 53475, 53859 and 53860.
Compatible tire inserts: Items 53434, 53435 and 53582.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 2, 2021. Specifications are subject to change without notice.

Hop-Up Options no.2001

Reinforced Racing Tires (Hard, 24mm/2pcs.)

Item No: 22001

★These slick touring car tires feature inner mesh to help prevent bulging and ensure grip does not deteriorate. ★For high track temperatures (30-50 degrees Centigrade). Guideline temperatures may differ with track conditions. ★Contains two 24mm width hard compound tires. ★The image at right shows a sample fitted to the TRF420 Chassis. Note the number 3 on the sidewall signifying hard compound.

Compatible Chassis
F103GT, FF-03, FF-03 PRO, FF-04 EVO, TA05 Ver.II, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TA07 MSX, TB-03, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TRF420, TT-02 Type-S & TT-02 Type-SR Chassis
Compatible wheels: Items 50892, 50894, 51022, 51046, 51072, 51299, 53453, 53468, 53471, 53473, 53475, 53859 and 53860.
Compatible tire inserts: Items 53434, 53435 and 53582.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

TRF Series no.273

39mm Drive Shafts for Double Cardan Joint Shafts (2pcs.)

Item No: 42373

★Double cardan shafts provide highly efficient drive on account of their dual joints, which enable proper tranmission of power even when the joints are angled. They can be particularly effective when used with direct couplings and the like. ★These 39mm drive shafts are for use in double cardan joint shafts. Crafted in hardy steel, their needle pins are 10.8mm long, boosting durability when using with Item 54921 Reinforced Swing Shaft Caps (Front/Rear, 2pcs. each). ★This item can be used as a spare part for Item 42372 39mm Double Cardan Joint Shafts (2pcs.), shown in the illustration at right.

Compatible Chassis
TC-01 & TB-05 PRO Chassis
*Use with Item 42372 or Item 42218, Item 42219, Item 42220 and Item 42221,

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of February 15, 2021. Specifications are subject to change without notice.

Tamiya Racing Factory Series no.274

VG O-Rings for Gear Differentials (40°)

Item No: 42374

★These O-rings are crafted in a material that provides excellent smoothness of motion while experiencing minimal distortion, meaning that your gear differential will run smoother, for longer, and you will spend less time working on the differential for replacements, etc. ★Contains four O-rings. ★The image at right shows an example of installation in Item 51566 TRF419 Differential Case (37T).

Compatible Chassis
DB-01^*1, FF-04 EVO, M-07 Concept, M-08 Concept, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TA07 MSX, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TRF420, TRF503, XV-01, XV-01T & XV-01 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of March 8, 2021. Specifications are subject to change without notice.