TQ R/C & Hobbies

1/10 Electric R/C Car Series No.466

Motul NISMO GT-R Tokachi 24Hours Race (TA05 ver.II)

Item No：58466

【 Tuned For 24Hours Race 】 This is a 1/10 scale R/C model of the MOTUL NISMO GT-R which raced at Tokachi, the only 24 hour endurance race held in Japan. The lightweight polycarbonate body realistically reproduces the GT-R’s distinctive form. In addition, separately molded parts for the unique rear wing, side mirrors, and light cases are included to enhance realism. Markings to depict sponsor logos are also included to allow to finish the body at ease.

【 The Evolved Race-Spec Chassis, TA05 ver.II 】 The chassis width has been reduced for greater roll movement range during cornering. Thanks to the one-piece aluminum motor mount with cantilever center shaft, the position of the battery pack has been shifted forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T center pulley. The four wheel double wishbone suspension features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes.

【 Specifications 】 ●Length: 444mm, Width: 187mm, Height: 132mm ●Wheelbase: 257mm ●Tread (Front & Rear): 165mm ●RS540 Type Motor ●Horizontally-Placed Motor Equal Length 2-Belt Driven 4WD ●Front & Rear Ball Differentials ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Front & Rear CVA Shock Units Super Mini ●Gear Ratio=7.19:1 ●Tire Width/Diameter (Front & Rear): 24mm/64mm ●Requires an Electronic Speed Controller

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter (x8)

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.465

Fiat Abarth 1000 TCR Berlina Corse (M-05)

Item No：58465

【 Classic on Modern 】 The Fiat Abarth 1000TCR Berlina Corse won European Touring Car Championship titles in 1968 and 1969. Based on the Fiat 500, this machine was equipped with a 948cc engine and had an impressive power of over 100hp, which made it possible to beat other race cars with larger displacements. This little monster now comes reproduced as a 1/10 scale R/C model. The classic body features such as the radiator integrated into the front bumper and large fenders have all been realistically reproduced. Furthermore, the rear-mounted exposed engine and side mirrors have also been recreated with separate plastic parts. The modern M-05 chassis features a low center of gravity and optimum chassis balance to offer you a superb handling and great excitement of R/C driving.

【 Low Center of Gravity M-05 Chassis 】 The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　an easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provides stable high-speed cornering. In addition, 55mm dia. slick tires are mounted on wheels which feature the same design as those from an actual vehicle to enhance realism.

【 Specifications 】 ●Length: 374mm, Width: 168mm ●Wheelbase: 210mm　●Front Motor Front Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio=5.8 :1 ●Tire Width/Diameter (Front & Rear): 25/55mm ●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries (x8) for transmitter

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.462

Datsun 240Z Rally (TT-01 Type-E)

Item No：58462

【 Safari Rally Hero 】 Debuted in 1969 as Nissan's domestic sports car, the first generation Fairlady Z actively took part in motor sports racing and showed off its superb performance especially in rally races. This 1/10 scale R/C assembly kit model replicates one such rally car, the Datsun 240Z. The distinctive long-nose, short-deck body silhouette has been realistically reproduced with durable polycarbonate. Separate parts for metal-plated front and rear bumpers, light cases, and light pods are included to enhance scale realism. In addition, LEDs are included to depict headlights (white) and taillights (red). Separately available LEDs can also be installed into light pods to further enhance realism.

【 Evolved Chassis 】 The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. In addition, racing radial tires with realistic tread pattern are mounted on black dish wheels.

【 Specifications 】 ●Length: 451mm, Width: 190mm, Height: 137mm　●Wheelbase: 251mm　●Tread (F/R): 161mm　●Tire Width/Diameter (F/R): 27/67mm　●Bathtub Type Chassis Frame　●Longitudinally-Placed Motor Shaft-Driven Full-Time　●F/R 3-Bevel Differential Gears　●3-Piece Steering Tie-Rod　●4-Wheel Double Wishbone SUspension　●F/R Friction Dampers　●Gear Ratio＝8.35:1　●Type540 Motor Included　●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 Batteries (x8) for Transmitter

Specifications are subject to change without notice.