TQ R/C & Hobbies

【 New Item 】

Limited Edition R/C Model

FF-03R Chassis Kit

Item No：84288

★The popular front-wheel drive FF-03 chassis has been upgraded with a variety of race-spec parts to create this "R" version. ★This chassis features newly designed parts including a carbon fiber battery plate and a redesigned gearbox which houses a gear differential unit to further enhance performance.

The information on this page is current as of April 18, 2012.

【 New Item 】

Limited Edition R/C Model

Team Lotus Type 102B (F104W)

Item No：84287

★Tamiya's R/C model of the Team Lotus 102B, which the company sponsored in 1991, is making a comeback on the modern F104W chassis. ★Features a polycarbonate body and rear wing. Rear wing stays are reproduced with injection-molded plastic parts. ★The F104W chassis features F103 front suspension arms to recreate the wide dimensions of earlier F1 machines. ★Comes equipped with front and rear high-grip sponge tires.

The information on this page is current as of April 18, 2012.

1/10 Electric R/C Car

1/10 R/C Mitsubishi Pajero Metaltop Wide

Item No：49490　 ※Limited Edition R/C Item

【 Realistic Body & 4WD Mechanism 】 This is a high-quality assembly R/C kit of the Mitsubishi Pajero, which has been extremely popular as a cross-country 4WD SUV since its release in 1993. Power is efficiently transferred from the front-mid mounted motor to the wheels via propeller shafts, and front double wishbone and rear 4-link rigid suspension setup add to the realism. Accurate scale wheels and tires, and a gorgeous body shell completes the package. In addition, by installing separately available TLU-01 light unit, LEDs can be added to further enhance your enjoyment of this 4x4.

【 Specifications 】 ●Length: 445mm　●Width: 195mm　●Height: 192mm　●Drivetrain: Shaft-driven 4WD　●Suspension: (Front) Double wishbone, (Rear) 4-link rigid　●Tire Width/Diameter: (Front/Rear) 33/88mm　●Diff Gear: 3-bevel diff, rear diff is lockable　●Includes Type 540 motor

【 Separately Required Items 】 ●2-channel R/C system with ESC ●7.2V battery and charger ●Alkaline batteries for transmitter

1/24 Sports Car Series No.93

Nissan R89C

Item No：24093

【 1989 Le Mans Contender 】 In order to win the 1989 Le Mans 24 Hours Endurance Race, Nissan came up with the R89C Group C race car. It featured a monocoque chassis made from carbon composite material and was powered by a 3.5-liter twin turbo DOHC V8 engine which produced 800hp. The front-mounted radiator was enclosed in the sleek nose section and the smooth curves of the car's distinctive body extended to the cockpit and tail areas. Nissan entered three of these cars in the 1989 Le Mans, where the No.24 car in particular was among the front-runners early on, but all three were eventually forced to retire due to mechanical issues.

【 About the Model 】 ★This is a 1/24 scale plastic assembly kit. Length: 196mm, Width: 82mm. ★The sleek, aerodynamic form of the R89C has been accurately reproduced. ★3.5-liter V8 engine features details such as turbochargers and gearbox. Rear cowling can be detached to reveal the engine after assembly. ★Detailed cockpit interior and suspension. ★Decals included to depict No.23, 24, and 25 cars.

The information on this page is current as of April 18, 2012.

1/24 Sports Car Series No.289

Toyota Tom's 84C

Item No：24289

【 Homegrown World Challenger 】 In 1982, the World Endurance Championship introduced the new Group C class, and the Porsche 956 quickly established itself as the dominant force in the category. In 1984, Toyota debuted its own Group C machine, the 84C, to challenge the Porsche for top honors at Le Mans. Featuring an aluminum twin tube monocoque frame, powerful 2,090cc twin turbo inline 4-cylinder engine, and advanced ground effect aerodynamics. Despite its potential, the Porsche just proved to be too strong and the only thing the 84C gained in the races it entered was experience.

【 About the Model 】 ★High-quality assembly kit display model of the 1984 Toyota Tom's 84C race car. ★Length: 186mm, Width: 83mm ★Sleek aerodynamic body accurately reproduced, including side air ducts and rear wing. ★Intricately detailed twin turbo 4-cylinder engine and 2-piece intercooler can be displayed even after assembly by removing the engine cowling. ★Front/rear double wishbone suspension and diffuser-equipped under-panel authentically depicted. ★Realistic full racing cockpit. ★Synthetic rubber tires with Bridgestone markings. ★High-quality Cartograf decals included to depict the No.36 machine.

【 New Item 】

1/16 World Figure Series No.15

WWII Wehrmacht Officer

Item No：36315

★1/16 scale assembly kit model of WWII Wehrmacht Officer. ★The realistically reproduced officer figure may be posed with a glove in his right hand. ★Separate parts to depict the jacket's collar and decoration medals, including the Knight's Cross, give the figure greater scale realism. ★Every detail of the officers' uniform has been superbly depicted. Rank insignia decals included.

The information on this page is current as of April 18, 2012.

1/35 Scale Limited Edition Set

U.S. MODERN ELITE INFANTRY w/ACCESSORY SET

Item No：89772

【 Must Haves for Any Modern Diorama 】 This is a 1/35 plastic model assembly set of U.S. modern elite infantry and equipment which saw action as a part of the Coalition Forces during the first Gulf War. ★The soldier figures, which are in a variety of cautious poses, are depicted in PASGT body armor and M88 helmets. ★The set also includes equipment such as M60E3 machine gun, M249 light machine gun, Stinger surface-to-air missile, ammunition and shell cases, and a sheet to depict field ration cartons. ★Two tank drivers also included (one full figure, one torso). ★You can use this set as a small diorama, or add it to an M1 Abrams tank or other figures to create a larger diorama. ★The infantry figures are products of ICM, Ukraine.

[About the First Gulf War] In August 1990, Iraq invaded its neighbor Kuwait. In January of the following year, Coalition Forces led by the United States began a bombing campaign against Iraq, which led to a ground offensive. Iraqi military forces fled Kuwait in February and on March 3rd a cease fire was agreed which ended the conflict.

[About the Uniforms] In the early 1980s, the U.S. military was equipped with BDU camouflaged field uniforms. Among these was the DBDU (Desert Battle Dress Uniform) which featured a camouflage pattern of black and white flecks that was nicknamed "chocolate chip" due to it having a similar appearance to chocolate chip cookies.

【 New Item 】

Racing Mini 4WD Series No.71

Saint Dragon Premium (VS Chassis)

Item No：18071

★The Mini 4WD Saint Dragon, which was among the popular "Dragon" series of machines that was first released in the 1980s, is making a return as a premium model. ★Compact, lightweight VS chassis is made from ABS plastic molded in Metallic Gray. ★Low-friction 13mm and 13-12mm double rollers included. ★Body is molded in Pearl White and can be finished with included metallic stickers.

The information on this page is current as of April 18, 2012.

【 New Item 】

Limited Edition Mini 4WD

Vanquish Clear Special (Polycarbonate Body)

Item No：94864

★This special version of Mini 4WD Vanquish features a lightweight clear polycarbonate body, through which the white and blue chassis can be viewed. ★The VS chassis comes with large-diameter narrow lightweight Light Blue wheels and Black arched tires which feature pad printed sidewall markings. 16mm front rollers with rubber rings also included.

The information on this page is current as of April 18, 2012.

1/32 Racing Mini 4WD Series No.14

Avante Jr.

Item No：18014

【 Have Fun Racing Mini 4WD! 】
The classic Mini 4WD Avante Jr. body is mounted on the Type 2 Chassis, which comes with large-diameter wheels and slick tires. Kit features two different gear ratios (5:1 and 4.2:1) and a wide range of Grade-Up Parts is available separately for further customization. Type 130 motor is included.

【 Specifications 】 ●Length: 128mm ●Width: 86mm ●Height: 50mm ●Type 130 motor included.

【 Separately Required Items 】 ●R6/AA/UM3 batteries x 2