TQ R/C & Hobbies

Limited Edition R/C Product

M-05 Ver.II R Chassis Kit

Item No: 84424

★This exciting product sees the already-racy M-05 Ver.II chassis packaged with a number of performance-boosting Hop-Up option parts. ★Double-cardan type drive shafts boost efficiency and cut losses in the drivetrain. ★Aluminum TRF short dampers aid traction in conjunction with M-05Ra type uprights. ★Kit features black aluminum and resin parts for a cool look. ★Aluminum battery holder contributes to a lighter-weight chassis.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.629

Mercedes-Benz G 320 Cabrio (MF-01X Chassis)

Item No: 58629

G Whizz!
The Mercedes-Benz G-Class' outstanding durability and off-road performance have made it a firm favorite with consumers since its inception in 1979, its polished technology taken over and modernized with each generation to make it a top class SUV. This is an R/C model assembly kit of the G 320, a 2-door cabriolet produced between 1997 and 2001, and much sought-after thanks to its stylish looks and typically uncompromising G-Class performance. The body is reproduced in tough, lightweight polycarbonate, with separately molded side mirrors and metal plated grille-parts. See below for more information about the exciting new shaft-driven 4WD MF-01X chassis, which this model pairs with 7-spoke wheels and semi-pneumatic treaded tires for super performance whether on- or off-road.

MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included.

Specifications
★Length: 385mm, Width: 177mm, Height: 180mm ★Wheelbase: 239mm (L) ★Tire Width/Diameter (Front & Rear): 30/77mm ★Tread (Front & Rear): 145mm ★Monocoque Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 9.5:1 ★Type 540 Motor ★Electronic Speed Controller (sold separately)

Separately Required Items
●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.630

Plasma Edge II (TT-02B Chassis)

Item No: 58630

★The Plasma Edge II is a controllable, fun-to-drive R/C 4WD buggy assembly kit. ★It uses a lightweight yet tough polycarbonate body that can be decorated with the bright and racy stickers included in the kit. ★The TT-02B chassis offers reliable and effective shaft-driven 4WD, and comes with white CVA oil dampers for a great ride, plus eye-catching fluorescent yellow dish type wheels.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.631

Subaru Impreza Monte-Carlo '99 (TT-02 Chassis)

Item No: 58631

★This R/C model assembly kit recreates the Subaru Impreza which competed on the 1999 rally circuit. ★The unmistakeable form is recreated in polycarbonate, with stickers included to depict the car's livery and markings. ★The TT-02 chassis provides an adaptable, reliable and controllable shaft-driven 4WD base for the model. ★Gold fin-spoke wheels are paired with hard-working rally block tires.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.196

XB Mercedes-Benz Unimog 425 (CC-01 Chassis)

Item No: 57896

★This factory-finished Expert Built (XB) R/C model recreates the 425, a variant of the hard-working and versatile Mercedes-Benz Unimog which first appeared in 1974. ★The lines of the boxy body are expertly recreated in durable polycarbonate, which is pre-painted in orange with light cases installed. Fit with separately-sold LED units to light up the model! ★The CC-01 is a cross-country shaft-driven 4WD chassis that gives a reliable and capable ride whether off-road or on.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Grade Up Parts Series No. 497

HG Carbon Reinforcing Plate for 13/19mm Roller (1.5mm)

Item No: 15497

★These plates make possible a whole range of Mini 4WD car modifications, including the installation of 13mm and 19mm rollers while keeping the car inside official Mini 4WD width regulations. ★The parts feature white printed Tamiya logo and roller size markings. ★Do not use cleaners, as they may damage the printed surface.

Compatible Chassis
Mini 4WD and Mini 4WD PRO cars
★Use with separately sold rollers. ★Some bodies and chassis may require modification.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Educational Construction Series No.223

Friction Powered Snail

Item No: 70223

★This eco-friendly kit creates an amusing snail model which moves without the need for batteries or motor! ★The motion of the flywheel powers the model forwards in typically languid snail fashion. ★A soft resin PP piece is used to express the shell and body. ★Altering the attachment position of the cranks which drive the model allows you to change the way the snail moves.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Educational Construction Series No.224

Swimming Dolphin

Item No: 70224

★Enjoy watching this model as it glides through the water with head and dorsal fin bobbing up and down. ★Powered via cranks by an underwater gearbox, the movement of the soft resin sheet tail makes for a swimming motion that looks just like a real dolphin! ★Changing the position of the float and dorsal fin allows you to make the dolphin swim in circles. ★Alter the attachment position of the cranks to change the swimming style and speed.
*Requires one separately sold R03/AAA/UM4 battery.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.