TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

F12tdf (TT-02 Chassis)

Thursday, 22 June 2017 14:47 Published in Tamiya

Electric R/C Car Series No.644

F12tdf (TT-02 Chassis)

Item No: 58644

A Breathtaking Model
This is an R/C model assembly kit recreating Ferrari's breathtaking F12tdf, a car which promised its drivers track-level performance on the road. The aerodynamic lines of its imposing yet sensual form are captured by a lightweight and durable polycarbonate body and polycarbonate parts to recreate front dive planes and side window winglets. Also included are separately molded depictions of side mirrors and headlight cases. Front grille and air vents are rendered effectively using stickers, while masking stickers are included to aid in the painting process. Only 799 of the real F12tdf were manufactured; if you weren't able to get your hands on one, this R/C model is an exciting 1/10 scale alternative!

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Silver color 10-spoke wheels are paired with tread pattern tires for a racy finish.

Specifications
●Length: 441mm, Width: 192mm, Height: 119mm ●Wheelbase: 257mm ●Tire Width/Diameter: 27/67mm (Front & Rear) ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ●Type 540 Motor ●Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

1/10 R/C Mitsubishi Pajero Metaltop Wide

Thursday, 22 June 2017 14:43 Published in Tamiya

Limited Edition R/C Product

1/10 R/C Mitsubishi Pajero Metaltop Wide

Item No: 47331

Test your Off-Road Mettle
This assembly kit creates an exciting R/C model that is equally at home on and off-road. It recreates the multi-use Mitsubishi Pajero Metaltop Wide car that was released by the Japanese manufacturer in 1993. A durable chassis with front-midship motor and efficient 4WD offers an informative assembly process and great performance thanks to suspension with front double wishbone and rear 4-link rolling rigid setups, combined with high performance oil dampers as standard. The form of the Pajero Metaltop Wide is accurately rendered by an ABS body.

Specifications
●Length: 445mm ●Width: 195mm ●Height: 192mm ●Shaft-Driven 4WD ●Front Suspension: Double Wishbone ●Rear Suspension: 4-Link Rigid ●Tire Width/Diameter: 33/88mm (Front & Rear) ●Front & Rear 3-Bevel Differential Gears ●Requires an Electronic Speed Controller (sold separately) ●Type 540 Motor included

Separately Required Items
●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

DCR-01 (MA Chassis)

Thursday, 22 June 2017 14:40 Published in Tamiya

Mini 4WD PRO Series No.46

DCR-01 (MA Chassis)

Item No: 18646

A Stylish 3-Piece
Tamiya welcomes a new concept in Mini 4WD car bodies with the DCR-01, a 3-piece construction with separate front and rear cowl parts in addition to an optional canopy piece. The main color used for the Yamazaki Takayuki-designed body is a luxuriant pearl red, and the kit comes with cool metallic stickers for decoration. Why not pair it with separately sold body parts sets in different colors to make your very own color combination?

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike. Here, the MA chassis comes molded in a crisp white to stylishly offset the colorful body. It features a 4:1 gear ratio and runs on large diameter 6-spoke wheels with low-profile tires.

Specifications
★Length: 156mm ★Width: 97mm ★Height: 36mm ★Includes double-shaft motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Spin Cobra Premium (Super-II Chassis)

Thursday, 22 June 2017 14:36 Published in Tamiya

Fully-Cowled Mini 4WD Series No.50

Spin Cobra Premium (Super-II Chassis)

Item No: 19450

Spin Me Right Round
This assembly kit creates a Premium version of the Spin Cobra Mini 4WD car. The Spin Cobra starred in the famed Mini 4WD cartoon "Let's & Go!!" as the car driven by Tokichi Mikuni. Metallic Blue is the color chosen for the racy body, which features big front fenders and graceful lines. Separate parts are used for the front and rear wings. Metallic stickers are included for the final decorative touch.

Super-II Chassis
The Super-II chassis is molded in in White polycarbonate ABS, and it offers increased toughness on an adaptable frame. Silver is used as the color for A parts including the battery holder and gearbox cover. Bumpers and rear stay feature multiple attachment points to allow a wide range of settings. 3-spoke wheels are mounted with tread pattern tires, while a motor and 4:1 gears are included.

Specifications
★Length: 150mm ★Width: 97mm ★Motor included ★Easy snap together assembly

Separately Required Items
★2x R6/AA/UM3 batteries

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

DCR-01 Body Parts Set (Gun Metal)

Thursday, 22 June 2017 14:33 Published in Tamiya

Mini 4WD Product

DCR-01 Body Parts Set (Gun Metal)

Item No: 95312

★This set is a color variation of the body parts from Item 18646 DCR-01 (MA Chassis). ★Mix and match the 3-part body 's components with those from Item 18646, or use them as is for a different look on your MA chassis.

Compatible Cars
MA chassis cars.

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Mini 4WD Product

Reinforced Gear Cover (for MS Chassis) White Mini 4WD Station

Item No: 95325

★Use in place of kit standard gear cover parts (A2, A6). ★Gear cover is affixed with 4 screws for excellent chassis toughness and rigidity. ★White is a versatile color that can be used in a range of color schemes.

Compatible Cars
MS Chassis cars

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Lightweight 13mm Aluminum Ball-Race Rollers (Ringless)

Thursday, 22 June 2017 14:29 Published in Tamiya

Mini 4WD Product

Lightweight 13mm Aluminum Ball-Race Rollers (Ringless)

Item No: 95301

★These are lightweight versions of race-spec aluminum ball bearing rollers. ★They offer around 30% weight savings thanks to the holes bored into them. ★Built-in 520 ball bearings make for silky-smooth rotation.

Compatible Cars
All Mini 4WD and Mini 4WD PRO cars.

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Water Scooter

Thursday, 22 June 2017 14:25 Published in Tamiya

Educational Construction Series No.226

Water Scooter

Item No: 70226

Water Wonderful Creation!
This delightful kit creates a mini water scooter. It moves thanks to a motor-powered centrifugal pump, which contains an impeller that draws water in and pushes it to the outside of the pump case, expelling it out of the discharge nozzle to provide forward motion. A rudder governs the direction of the expelled water: move it up and down to change speed, or left and right to steer the model. The model is made up of 6 parts and comes with 2 sets of marking stickers to choose from. A suction cup is included to allow use of the pump and motor in other models.

How does the Centrifugal Pump Work?
As the impeller rotates, water is pushed to the outside of the case by the centrifugal force. At the same time, more water is sucked in to the center of the case, in turn causing water to be pumped out through the discharge nozzle.

Specifications
★Length: 128mm, width: 52mm, height: 100mm (dimensions are approximate). ★Submarine motor included. ★The simple assembly process just requires snap-fitting and screwing together of parts.

Separately Required Items
★Requires R03/AAA/UM4 battery x1

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Craft Side Cutter (for Plastic/Soft Metal)

Thursday, 22 June 2017 14:23 Published in Tamiya

Craft Tool Series No. 129

Craft Side Cutter (for Plastic/Soft Metal)

Item No: 74129

★These versatile side cutters have a multitude of uses, including cutting thick plastic on R/C car and Mini 4WD kit sprues, as well as static model sprues, plastic pipe and more. ★They can also be used to cut aluminum, brass and other soft metals. ★Compared to other side cutters, they give a smooth cut surface. ★Easy-grip handles make for efficient work.

Cuttable material thicknesses
★Plastic: up to 3mm ★Aluminum wire: up to 2.5mm ★Copper wire: up to 2mm ★Brass wire: up to 2mm ★Nickel silver wire: up to 1.5mm

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Airbrush Filter

Thursday, 22 June 2017 14:21 Published in Tamiya

Tamiya Airbrush System No.55

Airbrush Filter

Item No: 74555

This filter is attached between the airbrush and hose, and filters moisture and dust from air supplied by the air compressor, especially critical in wet or humid conditions. It can be used on high-power compressors, and products in the HG and Airbrush Lite series. Water which accumulates in the filter is simply disposed off by pushing in the release valve.

★Joint size: PF1/8 (S)
Item 74536 Connector Joint for Basic Airbrush is required when using with Item 74531 Spray Work Basic Airbrush.
★Not for use with air cans or Tamiya-Badger airbrush products. ★Airbrush and hose are sold separately.

Information is correct as of June 12, 2017. Specifications are subject to change without notice.

Social sharing

Who's Online

We have 445 guests online