TQ R/C & Hobbies

Special Edition R/C Product

1/10 R/C 1997 Mercedes-Benz CLK-GTR (TT-01 Type-E)

Item No: 47437

★This is an R/C model assembly kit of a car which wowed the race scene in 1997. ★A polycarbonate body recreates the stretched, low form of the car. Side mirrors and rear wing are separately molded components. ★The model is based upon the proven shaft-driven 4WD TT-01 Type-E chassis.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Special Edition R/C Product

1/10 R/C The Grasshopper Candy Green Edition

Item No: 47348

**Please note that this product was formerly released as Item 84331. The specifications remain the same.**

Let the Grasshopper brighten up your track!
The Grasshopper is a 2WD racing buggy well-loved by beginners and veterans alike for its ease of assembly and excellent drivability, and at home both on- and off-road. Now, its durable plastic one-piece molded body comes in the vivid and glossy TS-52 Candy Lime Green color, and has been given a top-coat to really make sure that it is resistant to wear and tear. Apply the stickers and hook up the lights, and the body is ready to go! Paint the included driver torso figure as you like for the final touch.

Simple But Tough 2WD Chassis
The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable resin body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough terrain. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip on dirt tracks.

Specifications
●Length: 389mm、Width: 223mm、Height: 135mm ●Weight: 830g ●Type 380 Motor (Also compatible with separately-sold Type 540 motors) ●Rear-wheel 2WD ●3-Bevel Differential ●Suspension: Swing Axle (Front) & Rolling Rigid (Rear)　●Front/Rear Friction Dampers ●Tire Width/Diameter: 21/73mm (Front), 41/82mm (Rear)　●3-Piece Assembly Wheels ●Straight Ribbed Racing Rubber Front Tires ●Rubber Paddle Rear Tires ●Front and rear axles compatible with ball bearings (sold separately) ●Steering Rod with ball adjuster ●Reinforced Resin Bumper ●Requires an Electronic Speed Controller (sold separately)

Separately Required Items
●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

Information is current as of June 7, 2017. Specifications are subject to change without notice.

TRF Series no.254

TRF Big Bore Dampers+ (4pcs.)

Item No: 42354

About the Model
★Compared with TRF Dampers, these components have a 10% greater oil capacity that translates into enhanced grip for your car. ★Their aluminum cylinders have mirrored inner surfaces with a further HL coating for impressive smoothness of motion and minimal accumulation of dirt in your oil. ★Silicone O-rings improve overall responsiveness. ★Includes fluorine resin pistons, aluminum spring retainers and titanium coated piston rods. ★Damper ends and tops are borrowed from Item 54871 Reinforced V Parts for TRF Dampers. ★Aluminum parts have the stylish Tamiya blue anodized finish. ★Contains parts to assembled four dampers.

Compatible Chassis
FF-03, FF-03 PRO, FF-04 EVO, M-07 Concept, TA05 Ver.II, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-03, TB-03 VDS, TB-05 PRO, TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, TT-02, TT-02D, TT-02 Type-S, TT-02RR, XV-01, XV-01T & XV-01 PRO Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

TRF Series no.255

TRF Super Short Big Bore Dampers+ (4pcs.)

Item No: 42355

About the Model
★These race-use dampers have 10% greater oil capacity to facilitate high quality suspension in spite of their short size - both cylinder and piston rod are 2mm shorter than standard dampers, a total of 4mm. The former has an HL coating, and the latter is titanium coated. ★Silicone O-rings improve overall responsiveness. ★Includes fluorine resin pistons, aluminum spring retainers and titanium coated piston rods. ★Damper ends and tops are borrowed from Item 54871 Reinforced V Parts for TRF Dampers. ★Features two each of soft (red marking) and medium (yellow) black springs. ★Aluminum parts have the stylish Tamiya blue anodized finish. ★Contains components for the assembly of four dampers.

M-05, M-06, M-07 Concept^*1 & M-08 Concept Chassis
^*1Use with Item 54790 M-07 Concept Carbon Damper Stay Set (for TRF Short Dampers).

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1929

CC-02 Stainless Steel Adjustable Tie-Rod Set

Item No: 54929

★Use these durable stainless steel tie-rods in place of kit standard plastic B5 parts and 3x50mm threaded shafts. ★Turnbuckles also allow swift alteration of toe. ★6x7mm collars have a low-friction coating for further smoothness. ★Includes 3x53mm and 3x104mm turnbuckle shafts, three ball collars and four adjusters, plus a wrench for fine tuning.

CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Truck Option Parts Series no.57

Hub Nuts for Dual Wheels (Black, 2pcs.)

Item No: 56557

About the Model
★Used in place of kit-standard 4mm flanged nuts, these aluminum hub nuts give a realistic look to take your model to the next level. ★Tighten using kit-included wrench. ★Aluminum hub nut and steel outer cap components both have a matte black finish.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

TRF-Racer Jr. Black Special

Item No: 95550

★The TRF-Racer Jr. body just oozes realism, and is now released in a Black Special Mini 4WD assembly kit. ★The body is molded in clear polycarbonate. ★A sturdy race-capable base is provided by the three-part MS chassis, molded in a combination of black and light gray. ★Stickers are included in the kit for decoration.

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Grade-Up Parts Series no.525

Low Friction Plastic Double Rollers w/Rubber Rings (Red & Blue/13-12mm)

Item No: 15525

★This product includes two each of red and blue 13-12mm double rollers with rubber rings. ★The 13mm roller side supports your car as it whizzes around the circuit, and when it turns the car leans and the 12mm roller takes over. ★In this way, your car gains great stability through corners, aided by the rubber rings slowing the car slightly when it comes into with the circuit wall. ★Screws, nuts, stabilizer balls, a hex wrench and more are included.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

Spin Cobra

Item No: 95567

Get In a Spin!
This assembly kit creates the Spin Cobra, a static Mini 4WD with oodles of detail. From the big, bold front fenders to the sleek overall profile, its futuristic design gives the eye plenty to rove over. Clear body parts can be left unpainted if desired to allow closer inspection of the realistic depictions of the car's mechanical innards, which feature metal plated parts for even more realism. Synthetic rubber tires have tread patterns, and the front wheels can be steered by hand. And all of this, in a kit which requires no cement for assembly, just a simple snapping together of parts.

Specifications
★Length: 127mm ★Width: 86mm ★Height: 37mm

Information is current as of April 3, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

2mm Aluminum Lock Nut (Orange, 5pcs.)

Item No: 95556

★Stylish orange anodized aluminum lock nuts, great for securing rollers, mass dampers and so on. ★They feature a resin section for the screw to bite into, minimizing the possibility of their coming loose due to shocks and vibrations. ★Use them for a supremely reliable ride.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars cars

Information is current as of April 3, 2020. Specifications are subject to change without notice.