TRF Series No.326
1/10 R/C TA07 MS Chassis Kit
Item No: 42326
★This R/C chassis assembly kit takes the efficient single belt-driven 4WD TA07 PRO chassis to a new level with a new frame and multiple option parts! ★Revamped carbon fiber frame uses a 2.25mm thick lower deck and 2mm thick vertical upper deck plates. ★Front and rear drivetrain sections are mounted 2mm lower for improved traction under acceleration, while a 20T center pulley minimizes belt tension and rolling resistance.
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Special Edition R/C Product
1/10 R/C TT-02RR Chassis Kit
Item No: 47382
★This R/C model assembly kit is a tuned variant of the TT-02 shaft-driven 4WD chassis, bristling with option parts. Also in the kit are aluminum propeller shaft and rear upright components, high performance CVA oil dampers, and full ball bearings. ★Oil-filled gear differential units offer near infinite setup possibilities, and adjustable front and rear upper arms allow alteration of camber. ★Hard lower deck is molded in a stylish blue.
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
1/35 R/C Tank Series
1/35 Japan Ground Self Defense Force Type 10 Tank (w/Control Unit)
Item No: 48215
★This is a 1/35 scale R/C model assembly kit of the Japan Ground Self Defense Force (JGSDF)'s modern main battle tank, the Type 10. ★Utilizes dedicated R/C model components such as lower hull and idler wheels. ★Two mini motors and gears are installed in the hull rear, and are controlled by the included R/C system, which allows a range of speeds and turning circles, even pivots. ★A turret rotation unit actuates turret rotation and gun elevation. ★Upper hull parts are inherited from the original 1/35 Military Miniature Series model, and offer superlative accuracy. ★Requires four alkaline R03/AAA/UM4 batteries each for transmitter and control unit.
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Special Edition R/C Product
1/18 R/C King Yellow 6x6 (Painted Body) (G6-01)
Item No: 47376
★The school bus-inspired King Yellow 6x6 comes with a body pre-painted in camel yellow, which only requires cutting out and application of stickers! ★The model runs on the 6WD G6-01 chassis, which utilizes a gear differential on each of its 3 axles, and offers superb on- and off-road driving. It requires assembly.
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1815
TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.)
Item No: 54815
★These gear cover and lower suspension arm components are molded in glass fiber-reinforced resin. ★They boost damper stay rigidity and provide improved durability for the suspension.
Compatible Chassis
TT-02B Chassis
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1828
On Road Racing Truck H Parts (Chrome Plated)
Item No: 54828
★Shiny chrome plated H parts sprue with side mirror, coupler and rear bumper components, to customize your racing truck model. ★Please note that mirror surface parts are not included in this product.
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1832
T3-01 Rear Wide Pin Spike Tires (2pcs.)
Item No: 54832
★These wide tires will provide your model with enhanced grip, thanks to their minute pin spike pattern. ★They will also give your T3-01 chassis model a fresh look! ★Trim any body sections that may come into contact with tires.
Compatible Chassis
T3-01 Chassis
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1833
T3-01 Wheels for Rear Wide Pin Spike Tires (Chrome Plated, 2pcs.)
Item No: 54833
★These are shiny chrome plated wheels for use together with wide pin spike tires. ★They will also give your T3-01 chassis model a fresh look!
Compatible Chassis
T3-01 Chassis
Information is correct as of October 3, 2018. Specifications are subject to change without notice.
Hop-Up Options no.1837
1/8 Scale R/C Dancing Rider Lightweight Body Parts Set
Item No: 54837
★0.8mm thick polycarbonate body gives a lower center of gravity and boosts mobility, when compared with kit-standard 1mm-thick version. ★Use included aluminum glass tape for reinforcement, etc.
Compatible Chassis
T3-01 Chassis
Specifications are subject to change without notice.
Hop-Up Options no.1844
Marking Stickers (for 1/14 R/C On Road Racing Trucks)
Item No: 54844
★These sheets are packed with stickers of logos perfectly suited to racing truck models. ★Includes a variety of imaginary sponsors, numbers and other details for a super-realistic original racing truck body! ★Contains 210x300mm & 165x120mm sheets x1 each.
Information is correct as of October 3, 2018.Specifications are subject to change without notice.
We have 583 guests online