TQ R/C & Hobbies

【 New Item 】

Tamiya Italeri Series No.7

1/48 Macchi MC.200 Saetta

Item No：37007

★This is a 1/48 scale plastic assembly kit of the Macchi MC200 which was the Regia Aeronautica’s main fighter until mid-WWII. ★The distinctive profile of the aircraft, including an open style cockpit, unsymmetrical wings, and engine cowling with teardrop-shaped bulges, has been faithfully reproduced. ★Pilot figure and 4 kinds of markings included. ★Aircraft parts are product of Italeri.

Information and specifications coming soon.

1/35 Military Miniature Series No.310

Sturmeschütz III Ausf.G “Finnish Army”

Item No：35310

【 One Tough Finnish Tank 】 During the Soviet-Finland War during WWII, the Finnish Army were provided with Sturmeschutz III Ausf.G tanks from Germany which later became their main tank until the end of the war. Equipped to the low profile hull of the Ausf.G was a powerful, long-barreled 7.5cm anti-tank gun. Once they had arrived in Finland, their Schürzen armor was removed, tool boxes were placed on the rear deck, and modifications were made in order to install Russian DT machine guns. In the spring of 1944, the Ausf.G fought against Russian armored forces and protected Finland from invasion. Afterwards, to improve defensive capabilities of the Ausf.G, concrete blocks and logs were attached to the tank's hull. Even after WWII, the Ausf.G continued to serve the Finnish army with distinction up until the 1960s.

【 About the Model 】 This is a 1/35 scale plastic assembly model kit. ★Length: 189mm, Width: 85mm. Model faithfully reproduces the proud form of the Ausf.G used by the Finnish army. ★A wide variety of accessory parts are included to allow you to realistically depict either an early or late type Finnish army Sturmeschütz III Ausf.G. ★The DT machine gun has a sharp finish. ★Commander torso figure and four kinds of markings included.

Specifications are subject to change without notification.

1/35 Military Miniature Series No.311

Russian Assault Infantry（1941-1942）

Item No：35311

【 Early WWII Russian Infantry 】 This is the first 1/35 scale MM plastic assembly model set which depicts WWII Russian Army infantry who defended Russia against invading German forces during early WWII. Set depicts the commander figure urging his men forward, two shooting riflemen in standing and kneeling positions, a non-commissioned officer holding a grenade, and a machine gunner running. The figures are realistically depicted wearing field rubashka uniforms which were worn until early 1943. Highly-detailed accessories such as Mosin-Nagant rifles, grenade pouches, and magazine pouches for the DP light machine gun are included with the set. Decals are also included to reproduce rank insignias.

【 About the Unforms 】 In June 1941, with the beginning of the German invasion of Russia, Russian soldiers were seen wearing rubashka uniforms with folded collars. Rank was distinguished by shoulder badges, which had different hem colors to identify unit type. Officers were issued with leather boots whereas enlisted men were often provided with leggings. In addition to helmets and officer caps, field commanders also wore pilotka garrison caps. However, from January 1943, Russian soldiers were provided with new uniforms which featured straight collars with epaulets.

Specifications are subject to change without notice.

Limited Edition Mini 4WD

Avante Mk.III Race-Ready Set

Item No：94772

【 Ready for Competition 】
The popular Avante Mk.III comes equipped with a variety of Grade-Up Parts to enable participation in Mini 4WD competitions. Hex-hole ball bearings reduce friction loss and efficiently transmit the power from the Torque-Tuned Motor PRO to the wheels. Front & rear FRP Multi Roller Setting Stays allow wide roller settings. Kit comes with 12mm aluminum spacers (x4), 2x38mm threaded shafts (x2), and 2x25mm stainless screws (x2), 19mm low friction rollers (x6), 19mm plastic rollers with rubber rings (x2) and stabilizer ball caps are also included for 2 kinds of different roller settings. Furthermore, large diameter hard arched light blue tires are mounted onto the narrow lightweight dark silver wheels. Light blue A parts gives the MS chassis a stylish appearance. Checkered patterns on the sides of the body can be easily applied using an included sticker sheet.

【 Specifications 】 ●Length: 158mm ●Width: 103mm ●Torque-Tuned Motor PRO included. ●Snap-on easy assembly ●Screwdriver (+), Wrench, and rubber tube included.

【 Separately Required Items 】 ●R6/AA/UM3 batteries (x2)

Specifications are subject to change without notice.

【 New Item 】

Detail-Up Parts Series No.39

1/20 Lotus Type 79 1979 Photo-Etched Parts Set

Item No：12639

★The set includes photo-etched parts to depict brake discs, radiators, oil cooler core, and front/rear wingtip panels. ★Seatbelt parts are also included to further enhance the realism of the model.

Information and specifications coming soon.

【 New Item 】

1/20 Grand Prix Collection No.61

Lotus Type 79 1979 “Martini”

Item No：20061

★This is a 1/20 scale plastic assembly kit of the Lotus Type 79 1979 “Martini,” which featured a British Racing Green livery. ★Features of the Type 79, including the cooling system within the side pontoons, 4-spoke wheels, and instrument panel, are accurately reproduced. Front/rear cowlings are removable even after assembly. ★Metal air funnel covers included. ★Driver figure and Cartograf markings also included.

Information and specifications coming soon.

【 New Item 】

Masterwork Collection No.88

1/20 Lotus Type 79 1978 British GP No.6 (Finished Model)

Item No：21088

★This is a 1/20 scale finished display model of the Lotus Type 79, the championship winning machine in the 1978 F1 season. ★The model depicts the car from the British GP driven by Ronnie Peterson.

Information and specifications coming soon.

【 New Item 】

1/16 R/C Tank Series No.32

1/16 R/C M51 “Super Sherman” Full-Option Kit

Item No：56032

★This is a 1/16 scale R/C assembly kit of the M51 “Super Sherman” and features a superb realistic finish. ★The dynamic form of the tank, including the long main gun fitted with a massive muzzle brake and the extended turret, has been reproduced in rich detail. ★The tank features a realistic tank maneuverability and recoil effects. ★4-channel transmitter & receiver, battery pack, and charger sold separately.

Information and specifications coming soon.

【 New Item 】

1/12 Motorcycle Series No.119

Yamaha YZR-M1 '09 Monster Yamaha Tech 3

Item No：14119

★This is a 1/12 scale plastic assembly kit of the Yamaha YZR-M1 '09 Monster Yamaha Tech 3 which raced during the 2009 MotoGP season. ★The distinctive livery of the bike, including Monster Energy's three claw mark logo on a black-colored body, is depicted with Cartograf markings.

Information and specifications coming soon.

【 New Item 】

Masterwork Collection No.87

1/12 Honda RC166 GP RACER #16 (Finished Model)

Item No：21087

★Honda's legendary 6-cylinder motorcycle, the RC166 GP Racer, which won the 1966 World Road Race Championship 250cc class, now comes as a finished model. ★Beautiful lines of the cowlings have been faithfully reproduced. ★The model features aluminum wheel rims, stainless steel spokes, and metal front forks to achieve a more realistic scale presence.

Information and specifications coming soon.