TQ R/C & Hobbies

1/10 Electric R/C Car Series No.504

Audi R8 LMS - 24h Nurburgring (TT-01 Type-E Chassis)

Item No：58504

【 Master of the 'Ring 】 The 24 Hours Nurburgring is an endurance race where over 200 race cars navigate the formidable, undulating, 20km long Nurburgring circuit. The Audi R8 LMS which is the subject of this R/C model was the winner of its class during the 2010 iteration of this race. The race-modified look of this sleek race car has been accurately reproduced, with separate parts for the side mirrors and rear wing adding even more detail. A large sticker sheet also enables you to easily recreate the car's vibrant livery.

【 Evolved Chassis 】 The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. In addition, racing radial tires with realistic tread pattern are mounted on black dish wheels.

【 Specifications 】 ●Length: 434mm, Width: 194mm, Height: 122mm　●Wheelbase: 257mm　●Tire Width/Diameter (F/R): 27/67mm　●Bathtub Type Chassis Frame　●Longitudinally-Placed Motor Shaft-Driven Full-Time　●F/R 3-Bevel Differential Gears　●3-Piece Steering Tie-Rod　●4-Wheel Double Wishbone SUspension　●F/R Friction Dampers　●Gear Ratio＝8.35:1　●Type540 Motor Included　●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter

The information on this page is current as of October 21, 2011.

【 New Item 】

1/10 Electric R/C Car Series No.505

Volkswagen Scirocco GT24-CNG (FF-03)

Item No：58505

★1/10 scale R/C assembly kit model of the Volkswagen Scirocco GT24-CNG, which captured the AT (alternative powertrain) class title at the 2011 24 Hours Nürburgring. ★The stylish form of the 2-door hatchback, including rear wing and air vents on the hood, has been accurately reproduced. ★Features the FF-03 chassis for realistic front-wheel drive handling. ※Requires 2-channel R/C unit with ESC.

Information and specifications coming soon.

【 New Item 】

1/10 Electric R/C Car Series No.506

Ferrari 599XX (TA06)

Item No：58506

★1/10 scale R/C assembly kit model of the Ferrari 599XX, an extreme circuit-only machine which was based on Ferrari's flagship model, the 599. ★The stylish form of the 599XX, including C-pillar winglets, has been accurately reproduced by the polycarbonate body. ★TA06 chassis features belt-driven front and gear-driven rear wheels to provide efficient, yet sharp power transfer. ※Requires 2-channel R/C unit with ESC.

Information and specifications coming soon.

【 New Item 】

1/14 Tractor Truck Option Parts Series No.16

Maersk 40-Foot Container for Tamiya 1/14 Scale Container Semi-Trailer

Item No：56516

★1/14 scale 40-Foot Container comes with the markings for Maersk, one of the largest shipping companies in the world. ★Container features aluminum frame with durable ABS front, top, and side panels which have distinctive panel patterns. Rear doors may be opened. ★Parts to enable the realistic stacking of containers are also included. ※Semi-trailer is not included.

Information and specifications coming soon.

【 New Item 】

1/10 Expert Built Series No.120

XB Honda Ballade Sports Mugen CR-X PRO. (M-05)

Item No：57820

★1/10 scale ready-to-run R/C model of the Honda Ballade Sports Mugen CR-X PRO., a special version of Honda's popular 1980s FWD compact sports car created by famous tuner Mugen. ★The polycarbonate body captures the sporty form of the Mugen CR-X PRO., including the distinctive headlights, and is beautifully finished in White. ★The front-wheel drive M-05 chassis provides nimble handling and features a middle wheelbase (225mm).

Information and specifications coming soon.

【 New Item 】

1/6 Morocycle Series No.14

Honda MB50Z

Item No：16014

★1/6 scale plastic assembly kit model of the Honda MB50Z which was introduced in 1979. ★The simple form of the bike, including a unique cross line backbone frame structure and the distinctive front/rear Com-Star wheels, is accurately reproduced. ★Coil springs are used on rear dampers to enable rear suspension movement.

Information and specifications coming soon.

【 New Item 】

1/48 Aircraft Series No.109

Dewoitine D.520 "French Aces" w/Staff Car

Item No：61109

★Set includes a 1/48 scale plastic assembly kit model of the Dewoitine D.520, which fought fiercely against the Luftwaffe at the opening stages of WWII. ★1 seated pilot figure as well as 1 standing pilot and 1 standing officer figure (total of 3 figures) are also included. ★Comes with 3 decal options to depict the aircraft piloted by French aces ★Also comes with a 1/48 scale staff car to allow instant diorama creation straight from the box.

Information and specifications coming soon.

【 New Item 】

Masterwork Collection Series No.111

1/20 Team Lotus 99T Honda 1987 No.11 (Finished Model)

Item No：21111

★1/20 scale assembled display model of the Team Lotus 99T Honda 1978 depicting the No.11 car driven by Satoru Nakajima. ★Stainless steel pitot tube is included to add an extra highlight to the car. ★Display base with name plate included.

Information and specifications coming soon.

1/20 Grand Prix Collection No.66

Porsche 928S

Item No：20066

【 Porsche's 1979 Flagship Model 】 Porsche, which had established a great reputation for making sports cars with their 911 models, released a new flagship model called the 928 in March 1977. It featured a front-mounted liquid-cooled V8 engine and rear-mounted transmission to enable a 50:50 front/rear weight distribution as well as a "Weissach Axle" rear suspension system. In 1979, a version with enhanced performance called the 928S was announced. The engine displacement was increased from 4,474cc to 4,664cc to result in sixty more horsepower for a total of 300hp and top speed also increased to over 250km/h. Externally, the 928S featured a new wheel design, front and rear spoilers, and a distinctive crease line along the body sides to differentiate it from the standard 928.

【 About the Model 】 ★This is a 1/20 scale plastic assembly kit model of the Porsche 928S. Length: 224mm, Width: 91mm, Height: 66mm. ★Hood may be detached even after assembly to showcase the detailed liquid-cooled 4.7-liter V8 engine. Plug cables, fan belts, and radiator also feature superb details. ★Instrument panel details include speed and tachometers. ★Headlights can be depicted in either retracted or raised position. ★Synthetic rubber tires with realistic tread patterns included.

Specifications are subject to change without notice.

Racing Mini 4WD Series No.66

SLASH REAPER

Item No: 18066

【 Manga Artists x Mini 4WD - Part 2 】

The second Mini 4WD design from Japanese manga artists Eiichi Shimizu and Tomohiro Shimoguchi, who are well-known for their robot manga series "Linebarrels of Iron (Kurogane no Rainbareru)," is the Slash Reaper. Intended as the rival vehicle for the Rising Edge, this new machine features an aggressive Gun Metal and Orange livery. The design of the car was also inspired by a sickle and openings on the body serve to both reduce weight and increase motor cooling. This body shell can be mounted on the MS chassis and the Super-II chassis in addition to the VS chassis that is included in the kit. This VS chassis comes with eye-catching red wheels with large-diameter tires. It also features a 4.2:1 gear ratio and 16mm plastic rollers with rubber rings. To top it off, the package is adorned with illustrations by Eiichi Shimizu and Tomohiro Shimoguchi.

About the "Linebarrels of Iron"

This robot manga series features precision robot descriptions and dynamic storyline. In addition to be serialized in the magazine Gekkan Champion RED, it is also featured on TV, DVDs, and games to entertain fans.

【 VS Chassis 】 This chassis is compact, lightweight, and features a short wheelbase for nimble performance on technical circuits. Front-mounted 16mm rollers with rubber rings are included. Hinges enable easy attachment and detachment of the front cover and the battery holder while a 4.2:1 gear ratio ensures plenty of speed.
※CG and illustrations may differ from actual product appearance.

【 Specifications 】 ●Length: 146mm　●Width: 92mm　●Motor Included　●Snap-together easy assembly

【 Separately Required Items 】 ●2x R6/AA/UM3 batteries