TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

1/10 R/C 1991 Audi V8 Touring (TT-02)

Friday, 06 November 2020 16:11 Published in Tamiya

Electric R/C Car Series no.682

1/10 R/C 1991 Audi V8 Touring (TT-02)

Item No: 58682

Champion of DTM in 1991
This car graced the German Touring Car Championship (DTM) in 1991, with a 456hp 3.6-liter V8 engine mounted in the front and Audi's famed quattro four-wheel drive. This model depicts the 4-door sedan body in polycarbonate with front and rear spoilers. The Audi with its imposing body overcame significant ballast handicaps and stiff competition from the likes of BMW and Mercedes-Benz to bear driver Frank Biela to four wins and a superb Driver's Championship.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Wheels use slick tires with gold spokes and silver rims.

Specifications
★Length: 463mm, Width: 188mm, Height: 138mm ★Wheelbase: 257mm ★Tire Width/Diameter: 26/66mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of October 14, 2020. Specifications are subject to change without notice.

1/10 R/C TOYOTA GR Yaris (M-05)

Friday, 06 November 2020 16:09 Published in Tamiya

Electric R/C Car Series no.684

1/10 R/C TOYOTA GR Yaris (M-05)

Item No: 58684

A lively drive
Announced in 2020, this 4WD sports car boasts a compact three-door hatchback body. It features different exciting grades: the high power RZ and the high performance RZ, the RC competition spec, and the FF layout RS model. All are paired with the GR-FOUR sports 4WD system and a 272hp 1.6-liter 3-cylinder engine. This R/C model assembly kit captures such features the prominent radiator grille, bulging rear fenders and roof rear spoiler, and recreates the powerful body in polycarbonate. The front wheel drive M-05 chassis facilitates a lively drive, and uses black 11-spoke wheels with tires carved with realistic tread patterns.

M-05 Chassis: Low Center of Gravity, High Performance!
The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. 11-spoke wheels are molded in black and have tires with realistic tread patterns and inner sponge. In this kit, the chassis is setup with the 239mm L wheelbase.

Specifications
★Length: 372mm, Width: 168mm, Height: 137mm ★Wheelbase: 239mm ★Tread (Front & Rear): 138mm ★Tire Width/Diameter (Front & Rear): 25/59mm ★Monocoque Frame ★Front midship motor and front wheel drive system ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 5.8:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of October 5, 2020. Specifications are subject to change without notice.

C-Shaped 10-Spoke Wheels (Black) 4pcs.

Friday, 06 November 2020 16:06 Published in Tamiya

Spare Parts series no.1659

C-Shaped 10-Spoke Wheels (Black) 4pcs.

Item No: 51659

★These wheels will add a stylish touch to your car!

Compatible Chassis
M-05, M-05 PRO, M-05 Ver.II PRO, M-06, M-06 PRO, M-07 Concept, M-08 Concept, MF-01X*1, T3-01 and SW-01 Chassis
Compatible tires: Items 50568, 50683, 50684, 53215, 53222, 53254, 53340 and 54216.
*1Cannot be used with models using touring car size tires: Items 58629, 58635, 58614 and 58621.

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 5, 2020. Specifications are subject to change without notice.

TC-01 Double Cardan Propeller Shaft

Friday, 06 November 2020 16:04 Published in Tamiya

Hop-Up Options no.1961

TC-01 Double Cardan Propeller Shaft

Item No: 54961

About the Model
★These dual-jointed drive shafts are designed to provide great smoothness at the standard attachment angle, for highly efficient drive.

Compatible Chassis
TC-01 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

TC-01 Carbon Front Stiffeners

Friday, 06 November 2020 16:02 Published in Tamiya

Hop-Up Options no.1962

TC-01 Carbon Front Stiffeners

Item No: 54962

★This 2.5mm thickness carbon fiber component connects chassis and front cover (K1) for a more rigid front of the car and exacting suspension, plus minimal drive loss.

Compatible Chassis
TC-01 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

TC-01 Aluminum Rocker Arm Posts (4pcs.)

Friday, 06 November 2020 16:00 Published in Tamiya

Hop-Up Options no.1963

TC-01 Aluminum Rocker Arm Posts (4pcs.)

Item No: 54963

About the Model
★These aluminum components have a hard anodized finish, and can be used in place of kit-standard BB18 rocker arm posts. ★They will give smoother suspension, and also help lighten your car.

Compatible Chassis
TC-01 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

TRF420 Brass Bumper Posts

Friday, 06 November 2020 15:57 Published in Tamiya

Hop-Up Options no.1976

TRF420 Brass Bumper Posts

Item No: 54976

About the Model
★Used in place of kit-standard plastic B5 parts, these brass posts add weight to the front and facilitate sharper turn-ins.

Compatible Chassis
TRF420 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

Soft Stabilizer Set (TA07, TB-05)

Friday, 06 November 2020 15:55 Published in Tamiya

Hop-Up Options no.1979

Soft Stabilizer Set (TA07, TB-05)

Item No: 54979

★This set includes super soft (green), soft (red) and medium soft (black & silver) stabilizer bars for more setup options. ★4mm adjusters, rod stoppers, and stabilizer balls are also included.

Compatible Chassis
TA07 PRO, TA07 MS, TB-05 PRO and TRF420 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

German Tank Destroyer Marder I

Friday, 06 November 2020 15:53 Published in Tamiya

1/35 Military Miniature Series no.370

German Tank Destroyer Marder I

Item No: 35370

Adapt and Re-Use
With the fall of France in June 1940 Nazi Germany came into not only new territory, but also a large amount of captured materiel. Many of the French armored vehicles were pressed into German service, including the Marder I. It was based upon a late-1930s Lorraine tractor vehicle, paired with the German 7.5cm anti-tank gun and based in a new fighting compartment installed on top. The Marder I fought on numerous fronts in WWII and its offensive potential made it a foe for Allied forces to fear.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length: 146mm, width: 60mm. ★In-depth study of the actual vehicle ensures that this is a highly accurate depiction of the Marder I. ★Features a detailed rendering of the fighting compartment interior. ★Assembly type tracks utilize single-piece straight sections. ★Comes with two figures and three marking options.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

Lotus Super 7 Series II

Friday, 06 November 2020 15:51 Published in Tamiya

1/24 Sports Car Series no.357

Lotus Super 7 Series II

Item No: 24357

One for the Ages
Legendary British manufacturer Lotus manufactured the legendary Seven between 1957 and 1973, helping cement this lightweight kit car in the public's imagination across four model Series. The Series II car - the most prolifically produced - was announced in 1960; it had a redesigned frame, modified rear suspension, and smaller 13-inch wheels. Nose cowl and fenders were switched from aluminum to FRP, while in Super 7 cars, a higher-performance engine was employed. Although Lotus ended production in 1973, Caterham took over its manufacture and the car still thrills enthusiasts today, under the name of Caterham Seven.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 139mm, width: 61mm, height: 41mm. ★The classic, streamlined 2-seater form is captured in style. ★Features a detailed rendering of the inline-four engine, with carburetors, exhausts and transmission accurately depicted. ★Suspension is also authentically depicted: the front setup with stabilizer-cum-upper arm, and the rear trailing arm design with rigid setup. ★Metal air funnels for the engine, plus a host of photo-etched parts, make for an ultra-realistic finish. ★Metal-plated parts are used for headlight rings, hub caps and more. ★Choose whether to assemble as a road car, or a Clubman racer.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

Social sharing

Visitors

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday1725
mod_vvisit_counterYesterday4605
mod_vvisit_counterThis week15755
mod_vvisit_counterThis month66468
mod_vvisit_counterAll5485205

Who's Online

We have 305 guests online