TQ R/C & Hobbies

Special Edition Mini 4WD Product

Rise-Emperor Black Special (MA)

Item No: 95574

Black Special Emperor
This kit creates a Rise-Emperor Special version which is a main machine of Mini 4WD comic “Hyper Dash! Yonkuro”. This model features smoke-color body based on the concept sketch produced by the author of ”Hyper Dash! Yonkuro”, Hiroyuki Takei. Front and side frame give a powerful and dignified image. The black MA Chassis is molded in tough polycarbonate-ABS. Low friction resin A parts are molded in yellow, and deep black plated 4 spoke wheels use super hard and large-diameter slick tires which facilitate stable drive even in technical courses. Metallic stickers depict the metallic yellow line and racing number “1”.

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike. Here, the MA chassis features a 4:1 gear ratio.

Specifications
★Length: 156mm ★Width: 97mm ★Height: 48mm ★Includes double shaft motor ★Polycarbonate-ABS body (smoke) ★MA Chassis = tough Polycarbonate-ABS (black), A parts = low friction resin (yellow) ★Super hard and large-diameter slick tires (black/yellow pinstripe) ★4 spoke wheels (Deep black plated) ★Gear ratio=4:1 ★Includes metallic stickers ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of October 5, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

Mach Frame Black Special (FM-A)

Item No: 95587

New version of Mach Frame with powerful and tough black parts
This is a black special version of the Mach frame that won the TAMIYA AWARD in the 2018 Mini 4WD Design Contest held in Japan. A speedy-looking body is painted in smoke-color, which gives a powerful and mechanical image. Also, the FM-A chassis is molded in tough polycarbonate-ABS, and its color is black to match low friction resin A parts. Gold color plated A-spoke wheels use super hard and small-diameter low-profile tires which reduce the chance of the machine bouncing up and over the course wall after a jump landing, and facilitate high cornering performance. The metallic stickers include gorgeous gold body accents and blue cockpit.

FM-A: Aerodynamic Front Motor Chassis
The FM-A chassis is a front motor unit with advanced aerodynamic themes that - thanks to its center of gravity toward the front - is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The model includes a motor and 3.5:1 gears.

Specifications
★Length: 156mm ★Width: 97mm ★Height: 36mm ★Includes motor ★Polycarbonate-ABS body (smoke) ★FM-A Chassis = tough Polycarbonate-ABS (black), A parts = low friction resin (black) ★Super hard and small-diameter slick tires (black) ★4 spoke wheels (Matte gold plated) ★Gear ratio = 3.5:1 ★Includes metallic stickers ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Special Edition Mini 4WD Product

17mm Aluminum Ball-Race Rollers (Dish Type)
w/Plastic Rings (Red)

Item No: 95580

★These rollers utilize built-in ball bearings for smooth, efficient rotation. ★Precision 17mm components have red plastic rings for a boost to performance during high speed corners. ★Dish design ensures greater resistance to warping and bending. ★Set includes two rollers, plus spacers and other components for use in attachment.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars
*Some bodies may require modification.

Information is current as of November 5, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

HG Aluminum Wheels for Low Profile Tires II (Reversible, 2pcs.)

Item No: 95602

★These classy machined aluminum wheels will add a bit of extra shine to your Mini 4WD pride and joy. ★Not only that, they offer exceptionally true rotation and superior durability in the event of a crash or impact. ★Two wheels weigh around 6.5 grams combined, allowing you to alter chassis balance depending upon where they are installed. ★Their reversible design means they can be flipped over to allow installation on Super X and XX chassis (72mm shafts).

Compatible Cars
Mini 4WD and Mini 4WD PRO cars setup for use with small-diameter, low-profile tires
*Some bodies may require modification.

Information is current as of November 5, 2020. Specifications are subject to change without notice.

Finishing Materials Series no.206

Tamiya Masking Tape 1mm

Item No: 87206

★This is dedicated masking tape developed for plastic models. ★Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. ★At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. ★Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. ★Plastic core ensures minimal dust is produced. ★Length: 18m, width: 1mm.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

Finishing Materials Series no.207

Tamiya Masking Tape 2mm

Item No: 87207

★This is dedicated masking tape developed for plastic models. ★Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. ★At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. ★Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. ★Plastic core ensures minimal dust is produced. ★Length: 18m, width: 2mm.

Information is current as of October 14, 2020. Specifications are subject to change without notice.

Finishing Materials Series no.208

Tamiya Masking Tape 3mm

Item No: 87208

★This is dedicated masking tape developed for plastic models. ★Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. ★At just 3mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. ★Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. ★Plastic core ensures minimal dust is produced. ★Length: 18m, width: 3mm.

Information is current as of October 14, 2020. Specifications are subject to change without notice.