Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:
Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:
https://forms.gle/ZqUybUaVissSRpbb8
Registration fee: IDR 300,000 per racer, eligible for 20 run
Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country. For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.
Regulation:
1. Race system is bracket system 4-2-1
Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined
2. All parts MUST BE Tamiya original parts.
3. Racer can use their own rechargeable batteries
4. Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5. Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.
Other things to note:
1. Please note that all racers should bear their own tickets and accomodation to Jakarta.
2. Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.
Electric R/C Car Series no.694
1/10 R/C Toyota GR 86 (TT-02)
Item No: 58694
A Mouthwatering Prospect
The Toyota GR 86 is a lightweight front-engine, rear-wheel-drive sports car which was announced in April 2021; Powered by a 2.4-liter horizontally opposed four-cylinder DOHC engine capable of 235hp, the GR 86 delivers direct feel and the joy of driving to owners. It is recreated by this R/C model assembly kit, with the stylish form expertly recreated by a polycarbonate body.
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 10-spoke wheels use tread patterned semi-pneumatic tires.
Specifications
★Length: 428mm, width: 188mm, height: 131mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel resin differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.
Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
Information is current as of September 15, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2028
TD4 Assembly Universal Shafts (2pcs.)
Item No: 22028
★These universal shafts facilitate shafts' stability and efficient power transmission. ★Clip-ring together assembly provides not only easy setup but also superior performance. ★Use on front and rear. ★The image at right shows an example of attachment.
Information is current as of September 3, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2029
TD4 Differential Nut & Screw Set
Item No: 22029
★This rigid aluminum differential nut allows precise adjustment of ball differentials. ★A precision differential screw is also included. ★Right: this product is used in place of the kit standard plastic A5 component.
Information is current as of September 3, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2030
TD4 Aluminum Servo Stays
Item No: 22030
★These rigid aluminum servo stays offer secure attachment and sharp steering response. ★They have a blue anodized finish. ★The image at right shows an example of attachment.
Information is current as of September 3, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2031
TD4 Slipper Clutch Set
Item No: 22031
★This set is useful to not only protect drivetrain from overload but also control traction during acceleration. ★Great for slippery surfaces. ★Pressure plate featuring low friction anodized surface offers stable performance. ★Use with 48 pitch pinion gear. ★The image at right shows an example of attachment.
*Cannot be used with Type 540SH motor, Item 53068 Sport-Tuned Motor or Item 54358 Torque-Tuned Motor.
Information is current as of Novermber 8, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2039
TA08 Lightweight Front One-Way Set (37T)
Item No: 22039
★This front one-way unit parts set provides sharper acceleration and responsive steering, as wheels rotate freely when not on the throttle. ★It features a slimline pulley.
Compatible Chassis
TA07 PRO*1, TA07 MS*1, TA07 MSX*1, TA08 PRO, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis
*1: Use shims to adjust clearance.
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of October 26, 2021. Specifications are subject to change without notice.
Hop-Up Options no.2040
TA08 Lightweight Ball Differential Set (37T)
Item No: 22040
★This ball differential set includes slim, lightweight differential pulley, especially useful when installed in the rear, for a highly stable drive. ★Aluminum differential joints contribute to its lightness. ★Contents: Aluminum diff joints (A & B); ball diff pulley (37T); diff plate; 850 ball bearings x2; 3mm steel balls x12; 1/16-inch balls x8; ball diff grease; and more.
Compatible Chassis
TA07 PRO*1, TA07 MS*1, TA07 MSX*1, TA08 PRO, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis
*1: Use shims to adjust clearance.
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of October 26, 2021. Specifications are subject to change without notice.
TRF Series no.275
1280 Sealed Ball Bearings (2pcs.)
Item No: 42375
★These high performance ball bearings use a non-contact rubber seal and low-viscosity oil. ★Internal tightness can be adjusted to find optimal smoothness and give more precise camber and toe. ★Contents: 1280 sealed ball bearings x2
*Periodic application of oil is recommended to maintain peak performance levels.
Compatible Chassis
CR-01, F104, F104W, F104 Ver.II PRO, F104 PRO II, SW-01, T3-01, SU-01, TRF101, TRF102, TRF103, TT-01 Type-E, TT-01D Type-E, TT-02, TT-02 Type-S, TT-02 Type-SR, TT-02D, TT-02RR, TT-02FT & TT-02B Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of October 4, 2021. Specifications are subject to change without notice.
TRF Series no.276
1260 Sealed Ball Bearings (2pcs.)
Item No: 42376
★These high performance ball bearings use a non-contact rubber seal and low-viscosity oil. ★Internal tightness can be adjusted to find optimal smoothness and give more precise camber and toe. ★Contents: 1260 sealed ball bearings x2
*Periodic application of oil is recommended to maintain peak performance levels.
Compatible Chassis
RM-01, CC-01 & CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of October 4, 2021. Specifications are subject to change without notice.
TRF Series no.277
1150 Sealed Ball Bearings (2pcs.)
Item No: 42377
★These high performance ball bearings use a non-contact rubber seal and low-viscosity oil. ★Internal tightness can be adjusted to find optimal smoothness and give more precise camber and toe. ★Contents: 1150 sealed ball bearings x2
*Periodic application of oil is recommended to maintain peak performance levels.
Compatible Chassis
DF-02, DF-03, DT-02, DT-03, DT-03T, F103GT, F104 Ver.II PRO, M-05, M-05 PRO, M-05 Ver.II PRO, M-06, M-06 PRO, M-07 Concept, M-08 Concept, MF-01X, RM-01, TRF101, TRF102, TRF103, TT-01 Type-E, TT-01D Type-E, TT-02, TT-02 Type-S, TT-02 Type-SR, TT-02RR, TT-02FT & TT-02B Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.
Information is current as of October 4, 2021. Specifications are subject to change without notice.
We have 673 guests online