TQ R/C & Hobbies

TRF Series no.262

44mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.)

Item No: 42362

★Durable, rigid steel drive shafts have a low-friction coating for smooth motion. ★Shaft end needle pins are enlarged to 10.8mm for improved durability when fitting reinforced swing caps in Item 54921.

Information is current as of September 2, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1968

M-08 Aluminum Motor Bridge

Item No: 54968

★Used in place of the kit-standard K3 plastic part, this component allows attachment of fans (which require careful positioning to avoid interference). ★It also enhances the solidity of the chassis rear.

Compatible Chassis
M-08 Concept Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

Mini 4WD Product

Aero Manta Ray Black Special (AR Chassis)

Item No: 95419

A Special Ray
This kit creates a Black Special version of the aerodynamically honed Aero Manta Ray, with the unmistakable body molded in tinted Smoke ABS resin. Stickers are included in the kit to create a red-themed marking scheme inspired by the classic Manta Ray Jr. Black Special. Fittingly, the AR chassis is molded in black (polycarbonate-ABS), with matching black A parts in low-friction resin. Fluorescent oranage 6-spoke wheels are paired with super hard black tires featuring white sidewall lettering for a racy look.

AR: Aerodynamic Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, cooling the batteries and motor and extending their effectiveness. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features a 4.2:1 gear ratio.

Specifications
★Length: 155mm ★Width: 97mm ★Motor included ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of October 5, 2018. Specifications are subject to change without notice.

【 New Item 】

Limited Edition R/C Item

XB Ferrari F60 (Without R/C System)

Item No：84161

★This pre-assembled model is not equipped with R/C units to allow you to install your own desired R/C units. ★The beautifully finished body features tapered side pontoons as well as realistic side mirrors and wheel fairings. ★The direct drive 2WD F104 chassis offer sharp handling response. ★Rubber slick tires included. ※2-channel R/C system, battery pack and charger separately required.

Information and specifications coming soon.

Masterwork Collection No.86

1/12 Honda RC166 GP RACER #8 (Finished Model)

Item No：21086

【 6-Cylinder Legend 】 Honda's legendary racing bike, the RC166, was developed to win the World Road Race Championship in 1966. The bike featured a 250cc 4-stroke 6-cylinder DOHC 4-valve engine which thumped out an impressive 60ps/18,000rpm. Mike Hailwood rode the RC166 and won every 250cc class race he entered to give Honda their first Rider and Manufacturer's Championships. The RC166 now comes released as a beautifully finished display model.

【 About the Item 】★1/12 scale finished plastic display model. ★Length: 166mm, Width: 43mm. ★Front and rear wheels feature aluminum wheel rims and stainless steel spokes. Metal front forks achieve a realistic finish. ★The air-cooled inline 6-cylinder engine features cooling fins which provide a great scale realism. ★Curved lines of cowlings accurately reproduced. ★Solid rubber tires with realistic tread patterns included. ★Bike's livery is depicted with high-quality decals and pad-printed markings. ★The model depicts the bike at MAN TT Race ridden by S. Graham. ★The packaging features a clear window to allow you to see the stored model.

■Click here for information for the assembly kit version.

Specifications are subject to change without notice.

【 New Item 】

Grade-Up Parts Series No.412

Item No：15412

★This roller stay has been made with carbon-fiber reinforced material and features 3 attachment points for increased rigidity. ★Stay and roller mount can be separated to offer a wide range of settings. ★Includes 11mm and 17mm rollers.

Specifications are subject to change without notice.

Limited Edition Mini 4WD

Avante Mk.III Azure Clear Special (Polycarbonate Body)

Item No：94741

【 Durable, Lightweight Polycarbonate Body 】 This is an assembly kit model of the Avante Mk.III Azure Clear Special which features a durable, lightweight polycarbonate body. The 3-piece MS Chassis consists of lightweight center chassis with N-02 and T-01 units, which are all made of black ABS resin. Large diameter black tires with white letterings on sidewalls are mounted on narrow lightweight white wheels. Clear type sticker sheet as well as lightweight hollow shafts are also included.

【 Specifications 】 ●Length: 152mm, Width: 92mm ●Double Shaft Motor Included. ●Easy assembly (No glue required).

【 Separately Required Items 】 ●R6/AA/UM3 Battery (x2)

��For Mini 4WD PRO Series Grade-Up Parts click here

★For Mini 4WD PRO Series Grade-Up Parts click here

Specifications are subject to change without notice.

【 New Item 】

Limited Edition Mini 4WD Item

11mm Aluminum Ball-Race Rollers (Bowl Type)

Item No：94769

★When attached to underside of the bumper, these bowl type ball-race rollers will help your machine stay on track when running on the course walls. ★Use with Item 15412 and 94745 recommended.

Specifications are subject to change without notice.

1/20 Grand Prix Collection No.64

Wolf WR1 1977

Item No：20064

【 A Memorable Debut 】 Founded by Canadian businessman Walter Wolf, Walter Wolf Racing's WR1 made its debut at the 1977 Argentina GP and sensationally won the race. It was a historic result as it was the first time ever for a new team to win their debut race with a new car. The WR1 was designed by Harvey Postlethwaite and featured a light and considerably compact design. With Jody Scheckter at the wheel, the WR1 also went on to win the Monaco and Canadian GPs. At the end of the season, Jody Scheckter finished 2nd in the driver standings while the team finished a respectable 4th in the constructor standings despite only fielding one car.

【 About the Model 】 ★This is a 1/20 scale plastic assembly kit model of the Wolf WR1. Length: 199mm, Width: 100mm. ★The sharp form of the car has been realistically reproduced. ★DFV engine, transmission, and suspension have been precisely replicated. ★Cockpit features details such as pedals and seat cushion. ★High quality Cartograf markings are included to depict the car's livery including gold stripes, Canadian national markings, and sponsor logos. ★Photo-etched parts and metal air funnel covers are included for greater realism. ★Cockpit cowling and induction box are removable even after assembly.

Specifications are subject to change without notice.

【 New Item 】

Detail-Up Series No.38

1/20 Seat Belt Set F

Item No：12638

★This set greatly enhances the realism to the cockpit area of modern F1 machine's. ★Set includes photo-etched seatbelt buckles as well as cloth-like (blue, red, black) seatbelts and logo stickers. ★Stencil for tire sidewall markings is also included.

Specifications are subject to change without notice.