TQ R/C & Hobbies

TRF Series no.256

42mm Swing Shafts (Hard) 2pcs.

Item No: 42356

★These 42mm swing shafts have a special hard anodized finish and are thicker, for more efficient drive, even under heavier loads. ★Pin and cross joint are separated by 90 degrees for truer rotation.

※The image to the right shows an example of attachment to Item 47439 TT-02 Type-SR Chassis. Some parts were removed for this photo.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

TRF Series no.258

Transmitter Bag

Item No: 42358

★Keep your transmitter safe by carrying it around in this dedicated soft shell bag. ★Whether carrying it by hand or over your shoulder, or even attaching it to the separately sold trolley pit bag Item 42337, it will be a most convenient purchase. ★Features an internal divider making a small upper compartment for R/C equipment or other items. The cover has an interior pocket. ★Mainly black, with blue zippers and distressed TRF (Tamiya Racing Factory) logos, it is sure to garner admiring looks. ★Dimensions: 335mm x 210mm x 165mm. ★Material: nylon.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

TRF Series no.259

VG O-Rings for Oil Dampers (30°)

Item No: 42359

★These O-rings are crafted in silicone and provide an ideal balance of expansiveness and smooth motion, particularly for touring car models. ★Their 30 degree hardness facilitates ideal initial shock motion. ★There is minimal risk of air being sucked into the dampers, ensuring long-lasting, stable shock absorption. ★Components have a dark blue finish.

※The image to the right shows an example of attachment in Item 42353 TRF Super Short Big Bore Dampers+ (4pcs.). Some parts were removed for this photo.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

TRF Series no.260

42mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.)

Item No: 42360

★Durable, rigid steel drive shafts have a low-friction coating for smooth motion. ★Shaft end needle pins are enlarged to 10.8mm for improved durability when fitting reinforced swing caps in Item 54921.

Information is current as of September 2, 2020. Specifications are subject to change without notice.

TRF Series no.261

43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.)

Item No: 42361

★Durable, rigid steel drive shafts have a low-friction coating for smooth motion. ★Shaft end needle pins are enlarged to 10.8mm for improved durability when fitting reinforced swing caps in Item 54921. ★43mm shafts are designed for use when changing suspension mount setup.

Information is current as of September 2, 2020. Specifications are subject to change without notice.

TRF Series no.263

Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.)

Item No: 42363

★These axle shafts move the joint 1mm inside to allow fitting of 4mm ball bearings. ★This stabilizes the front of the car through turns, for improved cornering speed. ★Use as spare parts for the TRF420 chassis, or on other TRF Series touring cars in conjunction with Item 51239 or Item 42113.

Information is current as of September 2, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1960

TC-01 Aluminum Damper Extenders (4pcs.)

Item No: 54960

★Used in place of kit-standard plastic A5 parts, these blue anodized aluminum components will enhance damper performance with their superior rigidity.

Compatible Chassis
TC-01 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1969

33mm Lightweight Aluminum Swing Shafts (2pcs.)

Item No: 54969

★These lightweight aluminum swing shafts have drive pin and cross joint apart by 90 degrees to ensure smoother power. ★They also realize a weight savings of around a half. ★Components have a stylish blue anodized finish. ※Image at right shows example of attachment to the M-08 Concept chassis. Please note that other separately sold Hop-Up Options are also pictured.

Compatible Chassis
M-07 Concept & M-08 Concept Chassis
*Cannot be used with Item 42312 33mm Double Cardan Joint Shaft (2pcs.).

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1970

CC-02 Aluminum Spur Gear Mount

Item No: 54970

★Used in place of the kit-standard plastic A5 part, this aluminum mount gives a secure spur gear for more efficiency and better acceleration/speed. ★A 0.3mm thickness shim is included to fine-tune fit. ★The mount has a gun metal color anodized finish.

Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of September 29, 2020. Specifications are subject to change without notice.

Hop-Up Options no.1971

CC-02 Motor Mount Bridge Spacer

Item No: 54971

★Use this spacer to give a more secure motor position. It also helps avoid damage to the gearbox when screwing motor on and off. ★This is a precision component crafed in aluminum and given a gun metal color anodized finish. ★Two 3x14mm cap screws and three 3mm washers are also included. ★The image at right shows an example of attachment.

Compatible Chassis
CC-02 Chassis
*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of September 29, 2020. Specifications are subject to change without notice.