TQ R/C & Hobbies

Electric R/C Car Series no.714

1/10 R/C Volkswagen Golf II GTI 16V Rally (MF-01X)

Item No: 58714

A True Icon
The Golf is one of Volkswagen's most iconic cars. From its first appearance in 1974, the Volkswagen Golf has continued to develop and lead the worldwide compact car class, all the while also actively participating in motorsport. The second-generation model - the result of a full model change in 1983 - had a GTi sports model with a 1,781cc inline-4 engine. This assembly kit R/C model depicts that car, which met with success in global rally races, in 1986 becoming champion of its class. It features a lightweight and durable polycarbonate body, paired with the MF-01X chassis that parlays its shaft-driven 4WD into a great drive on road and flat dirt.

MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.

Specifications
★Length: 397mm, width: 170mm, height: 142mm ★Wheelbase: 239mm (L) ★Tire width/diameter (front & rear): 26/60mm ★Tread (front & rear): 138mm ★Monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 9.5:1 ★Type 540 motor ★Electronic Speed Controller (sold separately)

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 29, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.724

1/10 R/C 2003 Ford Focus RS Custom (TT-02)

Item No: 58724

In Sharp Focus
This R/C car assembly kit depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations. Its powerful body is recreated in polycarbonate, and the model is based upon the efficient shaft-driven 4WD TT-02 chassis.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Silver color fin-spoke wheels use semi-pneumatic slick tires.

Specifications
★Length: 427mm, width: 185mm, height: 145mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 1, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.726

1/10 R/C XV-02RS PRO Chassis Kit

Item No: 58726

On-Road Oriented Rally Chassis!
This 4WD touring chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via identical length front and rear propeller shafts, and is ideally setup for on-road running. 39T differential gears front and rear, and one setup option 40T differential gear are included, facilitating changes to drive balance. It features optimum balance and a slim chassis with carbon fiber-reinforced rigid lower deck. The 4-wheel independent double wishbone suspension has dedicated aluminum-cylinder oil dampers.

Featured Components
Drivetrain: Full ball bearings, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (2x 39T and 1x 40T gears included), front and rear universal drive shafts
Suspension: Front and rear aluminum oil dampers (blue caps, touring car size), 6-degree caster blocks, turnbuckle upper arms, 3.5mm thickness carbon damper stays
Chassis: Carbon fiber-reinforced lower deck, aluminum servo mount, angled front bumper, hi-torque servo saver

Specifications
★Length: 368mm, width: 180mm ★Wheelbase: 257mm ★Carbon fiber-reinforced plastic bathtub frame ★Front midship motor, shaft-driven 4WD ★Front & rear oil-filled gear differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Aluminum cylinder oil dampers (blue caps, touring car size) ★Gear ratio = 7.00:1 using kit 26T pinion (14 ratios between 10.71:1 and 6.28:1 are possible with separately sold pinions) ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★Body ★Type 540 motor ★2-channel R/C system w/ESC & low-profile servo ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 29, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2072

XV-02 Aluminum Steering Arms (L/R)

Item No: 22072

★These precision crafted aluminum steering arms feature built-in 850 ball bearings for smooth motion. ★They will also firm up the steering setup and give a more direct driving feel. ★Arms have the iconic Tamiya blue anodized finish.

Information is current as of August 1, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2073

XV-02 Carbon Bumper Support

Item No: 22073

★Crafted in 2mm thickness carbon fiber, this lightweight ad tough support will firm up your front bumper and reduce body wobble. ★The carbon fiber pattern will give your model a racy mood, too! ★Also contains two each of rubber bushings and snap pins, and more.

Information is current as of August 1, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2074

XV-02RS Stabilizer Set (Front & Rear)

Item No: 22074

★Tune up your suspension with these stablizers, which help keep it from flipping. ★Front (1.0mm) and rear (1.1mm) stabilizers are included, and their use of ball links allows adjustment of balance.

Information is current as of August 1, 2023. Specifications are subject to change without notice.

1/12 Big Scale Racing Car Series no.46

Team Lotus Type 72D 1972

Item No: 12046

A History Maker
The Lotus 72 was certainly an attention-grabbing car, and not just because of the stunning performance which swept Jochen Rindt to a world championship in 1970. An unmistakable wedge-shaped silhouette, cockpit-side radiators and torsion bar spring suspension were just some of the notable features on its avant-garde design. Team Lotus were never ones to rest upon their laurels, and the 1972 iteration of the car, the 72D was updated across the board - including a high-profile change of sponsor and a striking black color scheme. Burgeoning Brazilian driving sensation Emerson Fittipaldi was right at home in the 72D, and his 5 victories from 12 races were enough to take him to a maiden drivers' championship and Lotus to yet another team championship crown.

About the Model
This is a 1/12 scale plastic model assembly kit recreating the Team Lotus 72D that took the team and star driver Emerson Fittipaldi to championships in 1972. ★Length: 400mm, width: 173mm, height: 87mm. ★The distinctive wedge-shaped 72D form is captured with aplomb. ★Torsion bar suspension mimics that of the real car, and provides smooth movement. ★Steering wheel moves front wheels via rack and pinion mechanism. ★Breathtaking engine recreation even features tubing to recreate pipes and wiring. ★Front cowl and cockpit cowl fairings can be removed after assembly. ★Features semi-pneumatic synthetic rubber tires. ★Photo-etched parts and seatbelt parts add further to the precision finish. ★Driver figure included.

Information is current as of August 29, 2023. Specifications are subject to change without notice.

Special Edition Static Model Product

1/48 Focke-Wulf Fw190 D-9 JV44 & Citroen Traction 11CV Staff Car Set

Item No: 25213

★This handy set pairs a Fw190 D-9 with JV44 markings, with the Citroën 11CV staff car, perfect for a diorama out of the box. ★The D-9 form is recreated in style, with particular points of interest being the detailed cockpit and landing gear. ★The 11CV can be painted in a late-war dark yellow scheme if desired.

Information is current as of August 4, 2023. Specifications are subject to change without notice.

Special Edition Static Model Product

1/48 Messerschmitt Me262 A-2a w/Kettenkraftrad

Item No: 25215

★This great value set pairs the Me262 A-2a jet with the super-versatile Kettenkraftrad. ★The Me262 form with dual engine pods is captured in style, with great detail in the cockpit and 30mm cannons. ★The simple Kettenkraftrad design is depicted expertly in 1/48 scale.

Information is current as of August 4, 2023. Specifications are subject to change without notice.

1/35 Military Miniature Series no.60

German Tank Destroyer Marder II

Item No: 35060

Anti-Tank Pinch Hitter
During the early stages of the German invasion of the Soviet Union, the anti-tank self-propelled gun Marder II countered overpowering Russian tanks T-34 and KV-2. In 1941 it had become clear that not only Panzerkampfwagen III and IV but also the 5cm Pak 38 did not have enough power, and the 7.5cm Pak 40 was developed; it could penetrate 130mm armor plate from 1,000m away, and at a rate of up to 14 shots per minute. The Marder II equipped the 7.5cm Pak 40 with the open-top fighting compartment based upon the Panzerkampfwagen II. The production started from the middle of 1942.

About the Model
★This is a 1/35 scale plastic assembly model. Length: 175mm. ★The open-top form with a 7.5cm Pak 40 is authentically captured in style. Features a realistic rendering of barrel base. ★The interior details of open-top fighting compartment such as bulletproof plate inside face, radio rack and ammunition box are well worth closer inspection. ★Includes components to depict wooden box, shells and empty cartridges. ★Gun travel lock and ammunition box can be assembled for a vehicle in combat or on the move. ★Two full body figures are included.

Specifications are subject to change without notice.