Item No:58742

All Electric R/C Car Series No.742

1/10 R/C HORNET EVO.

This R/C model assembly kit is an updated version of The Hornet, the original of which was first released in 1984. It largely keeps the original bathtub frame and pairs it with 4-wheel independent double wishbone suspension and oil dampers, while the sealed rear gearbox gives excellent off-road dust proofing with a built-in 3-bevel differential gear for smooth cornering. Three-piece assembly wheels are paired with front ribbed and rear high-grip spike tires, and a lightweight and durable polycarbonate body can be decorated with the included stickers, which have been freshened up on the occasion of The Hornet's 40th birthday.

Smooth 4-Wheel Doubel Wishbone Suspension
Hornet EVO. uses a lightweight, superbly balanced chassis based around a slim ABS plastic bathtub with the R/C equipment atop the inline battery pack in the lower center; its 4-wheel independent double wishbone suspension uses upper I arms and lower H arms front and rear, with CVA oil dampers making for smooth motion. Turnbuckle upper arms ensure that you can adjust the camber to meet your needs. The motor is mounted in the rear along with a sealed gearbox, and dog bone design drive shafts give an extra layer of reliability, with full ball bearings ensuring efficient drive.

Specifications
★Length: 430mm, width: 230mm, height: 135mm ★Wheelbase: 251mm ★Weight (not including R/C equipment and battery pack): 1,075g ★Rear-wheel drive ★4-wheel double wishbone suspension with CVA oil dampers ★Tire width/diameter: 21/73mm (front), 49/86mm (rear) ★Type 540 motor ★Gear ratio = 9.28:1 (with kit 17T pinion) ★Full ball bearings ★ESC included for export.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 13, 2024. Specifications are subject to change without notice.

Item No:47514

Special Edition R/C Models No.514

1/10 R/C ENEOS X PRIME GR Supra (TT-02 CHASSIS)

This R/C model assembly kit recreates the ENEOS X PRIME GR Supra of Rookie Racing, which is one of six GR Supra cars taking part in the GT500 class of Super GT 2024. A polycarbonate body depicts the complex, honed body, and a comprehensive sticker sheet is included to help you apply sponsor logos and the like. The TT-02 is an adaptable chassis platform great for beginners yet customizable to your tastes and ability.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 12-spoke wheels use semi-pneumatic slick tires.

Specifications
★Length: 466mm, width: 188mm, height: 125mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 13, 2024. Specifications are subject to change without notice.

Item No:56376

1/14 R/C Tractor Truck Series No.76

1/14 R/C SCANIA 770 S 8x4/4 (GUN METAL EDITION)

This R/C model assembly kit recreates the Scania 770 S 8x4/4, a double front-axle steering, double rear-axle drive eight-wheel heavy trailer head equipped with a 16.4-liter V8 turbo engine capable of 770hp, added in 2020 to the Swedish manufacturer Scania's top-grade S Series. The model has a highly realistic cab which - along with the side deflectors, roof, bumper and other parts - is pre-painted in gun metal color. Inside the cab is an interior with rounded dashboard and other details. Its chassis features a ladder frame with aluminum side channels, and power is delivered to the two rear axles via a 3-speed transmission, while the two front axles are steered by a single servo; the second axle is a lift axle which can be manually raised and lowered.

Specifications
●Length: 610mm, width: 196mm, height: 320mm, weight (without optional parts): approx. 4.2kg ●Wheelbase: 183mm + 109mm + 103mm ●Tread: 155mm (front), 138mm (rear, double tire) ●Chassis: aluminum & polycarbonate resin ladder frame ●Suspension: front/rear leaf spring rigid ●Caster angle (front/rear): 0°/0° ●Camber angle (front/rear): 0° ●Toe angle (front/rear): 0° ●Aluminum dummy dampers (front/rear) ●Dual rear axle drive ●3-gear transmission (gear shifting operated via transmitter) ●Gear ratio = (1st gear) 32.49:1, (2nd gear) 17.66:1, (3rd gear) 10.66:1 ●3-bevel differential gears ●Type 540 motor ●Tire width/diameter: 30mm/85mm (front); 22mm/84mm (rear) ●TR Mighty-Tuned Motor (35T) ●Tire width/diameter: 30mm/85mm (front), 22mm/84mm (rear)

Separately Required Items
★R/C system ★Servos x2 ★ESC or Multi-Function Control Unit ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Realistic Lights, Sounds, and Vibration
Tamiya Multi-Function Control Units (sold separately) offer light, sound, and vibration operation to accompany your R/C truck experience. Engine sounds have been digitally recorded from an actual truck, and together with air horn, gear shifting, and many other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

Semi-Trailers Separately Available
Various types including semi-trailer, tank-trailer, and pole-trailer, are currently available. Attach any one of them via the coupler on the model to create an exciting combination over a meter in length.

Information is current as of September 13, 2024. Specifications are subject to change without notice.

Item No:47508

Special Edition R/C Models No.508

1/10 R/C PORSCHE 956

This R/C model assembly kit recreates the legendary Porsche 956, which was developed along with the start of Group C regulations for endurance races in 1982 and proved a dominant presence, taking maker and driver crowns in 1982 and then astonishingly winning all 7 races on the 1983 endurance circuit. The aerodynamically refined body is recreated in lightweight polycarbonate plastic, with plenty of detail provided by separate parts for the rear wing, head- and taillights. Stickers are included in the kit to recreate sponsor logos, body side pin stripes and more. Choose whether to finish your model as car #1, #2 or #3.

Direct-Drive 2WD Chassis
Based around an ABS plastic bathtub, with space frames front and rear and FRP plate, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive drive. At the front, it has an independent coil-sprung king pin suspension setup, while the rear rigid suspension is a 3-point design with a 1.5mm thickness FRP T-bar and CVA oil damper; teamed up with sponge tires front and rear, they ensure superb road holding. Additionally, use of spacers allows two different front and three rear ground clearance setups. The 2WD direct drive setup transmits power straight to the rear wheels via a spur gear, with a built-in ball differential giving limited slip diff effect.

Specifications
★Length: 483mm, width: 207mm, height: 108mm ★Wheelbase: 270mm ★Tire width/diameter: 28/64mm (front), 45/68mm (rear) ★Bathtub frame with space frame and FRP plate ★Transverse motor direct drive 2WD ★Ball differential ★2-piece steering tie-rod ★3-point suspension with CVA oil damper ★Gear ratio = 5.00:1 ★Sport-Tuned motor ★Contact your local Tamiya Agent regarding the ESC.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 13, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.743

Item No:58743

1/10 R/C TOYOTA CELICA GT-FOUR (ST205) (TT-02 CHASSIS)

Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. Now it appears as a radio control model assembly kit with a polycarbonate body recreating the car's classic form and separately molded parts adding plenty of detail.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels use semi-pneumatic treaded tires.

Specifications
★Length: 451mm, width: 186mm, height: 134mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★ESC included for export.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 13, 2024. Specifications are subject to change without notice.

1/24 Sports Car Series No.45

Item No:24045

1/24 Honda BALLADE SPORTS MUGEN CR-X PRO.

The Mugen CR-X PRO. was a special version of the Honda Ballade Sport CR-X, a fun FF lightweight sports car first announced in June 1983. Mugen is a famous tuner of Honda cars and they fitted the Mugen CR-X PRO. with a plethora of performance parts plus a revamped body with air dam bumpers and blister fenders that featured design work from Mooncraft, the company founded by Japanese car designer Takuya Yura. It also had upgrades to its intake and exhaust sytem and the suspension: honed on the circuit and often customized even further by its owners, the CR-X PRO. really stood out among numerous custom CR-X cars.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 154mm, width: 75mm, height: 59mm. ★The powerful form of this customized car is captured in style. ★A realistic interior has depictions of seats, instrumentation and more. Choose between 2 types of steering wheel. ★Exhaust and suspension details enliven the underside of the model. ★Decals recreate features such as body stripes, window frames and seat patterns. ★Realistic synthetic rubber tires.

Information is current as of October 17, 2024. Specifications are subject to change without notice.

Educational Construction Series (Units) No.260

Item No:70260

UNIVERSAL GEARBOX 2

This assembly type gearbox has two shafts which provide independent motion; each shaft offers three gear ratios, and you can change the attachment position of the removable mount to switch between four different output directions. Clear parts leave internal mechanisms visible. Crank plates are included.

Specifications
★Length: 63mm, width: 29.8mm, height: 27.8mm (dimensions when assembled) ★Shaft section width: 13.4mm ★Type 130 motor included. ★3mm hex shaft gear ratios are 102.4:1, 273.1:1 and 728.2:1 ★2mm shaft gear ratios are 8.5:1, 22.8:1 and 60.7:1 ★Crank plates and small parts for attachment are included.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Screwdrivers No.165

Item No:74165

MINI 4WD HEX WRENCH SCREWDRIVER BIT

Plug this into the grip in the separately sold Mini 4WD Screw & Nut Driver Set PRO to efficiently tighten up 2mm cap screws. This bit is magnetic, is crafted in chrome molybdenum vanadium steel, and has the bit size laser engraved in it. ★Length: 20mm ★Bit size: 1.5mm hex ★For use on 2mm cap screws, and other screws with 1.5mm hex holes.

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Mini 4WD Special Edition Products (Parts)

Item No:95668

FULLY COWLED MINI 4WD COMPACT BAG (BLACK)

This handy little nylon bag is perfect for carrying your Mini 4WD car or parts, and can even take the Mini 4WD Parts Storage Box Set (Item 15460), the Mini 4WD Motor Case 2 (Item 15505) or the Mini 4WD Parts Case (Item 15163)! It has dual zippers and opens up nice and wide for easy access. This black back has pink printed logos: Fully Cowled Mini 4WD on the front and the Tamiya logo on the back. ★Interior dimensions: 120mm x 190mm x 115mm (height) ★Maximum load: 1kg

Information is current as of September 3, 2024. Specifications are subject to change without notice.

Mini 4WD Special Edition Products (Parts)

Item No:95674

FULLY COWLED 30TH ANNIV. HG CARBON FRONT STAY (1.5mm/SILVER)

★This 1.5mm stay can be fitted to your Fully Cowled Mini 4WD Series car without the need for any modifications! ★It commemorates thirty years of the Series, and features a rather special silver color carbon fiber pattern plus wording printed in blue. ★Sporting refined lines, it has holes for the attachment of 9mm, 13mm and 19mm rollers to ensure there are setup options aplenty. ★The stay can also be attached to the underside of your car to lessen the likelihood of getting stuck on the course fence.

Information is current as of September 3, 2024. Specifications are subject to change without notice.