● MR-TTS Temp Tuning Screwdriver |
● Specs |
Size | 88x15mm(Except driver) | Accuracy | ±2.5% |
Weight | 28g | Resolution | 0.2℃ |
Temperature range | -33~220℃ | Response time | 1sec |
Operating temperature | 0~50℃ | Cell type | LR-44 2EA |
Auto switching Off | 15sec | Case | Aluminum + Plastic |
● Features |
Non contact temp gauge measures -33 to 220 degrees. Special silicon ring ensures consistent positioning when checking engine temperature. Race designed screwdriver is long enough to reach small areas. |
● MR-CTG CTX Temperature Gun |
● Spec |
Size | 88x15mm | Accuracy | ±2.5% |
Weight | 28g | Resolution | 0.2℃ |
Temperature range | -33~220℃ | Reaction time | 1sec |
Available temperature | 0~50℃ | Cell type | LR-44 2ea |
Auto Power OFF | 15sec | Case | Aluminum, Plastic |
● Features |
Temperature gun, simple hand held device that comes with a key chain. It offers instant non contact and accurate temperature measurement from -33 to 220 degrees celsius and can also be displayed in Fahrenheit. |
● MR-PSWU RC Stopwach with USB Link |
● Features |
Perfect laptimer for RC racing. 500 laps recall, segregated memory and saved data can be uploaded to PC and printed. Comes supplied with lanyard, USB cable and required software. |
● MR-BHT Battery Hole Tool for Pack Equalizer |
● Features |
Compatible, used for Muchmore Pack Equalizer. To use the Pack equalizer you need to drill shrink for outer terminal of battery pack.. |
● MM-DBMK Diff Break-In Machine Black |
● MM-DBMB Diff Break-In Machine Blue |
● MM-DBMP Diff Break-In Machine Purple |
The Diff Break-In Machine is a device that can quickly and effectively break-in your new ball diffrential Prepare your car just as you would do for racing, then simply connect this device to your car's wheel nut, connect the input clips to a 12V power supply. While holding the tire on the other side, turn the switch on to spin the wheel forward, let the diff sit properly for 10 to 30 seconds. Repeat the process for the other side to make it well balanced. After the break-in process is complete , you will feel the diff is smoother than it was when newly built. It will increase the life time and efficiency of the diffs as well as help deliver consistent lap times |
● MM-BWBK 1:8 TRUE Buggy Wheel Balancer |
● Features |
1:8 TRUE Buggy Wheel Balancer is balancing tool of wheel. Wheel balancing work increases Tire grip and Stability jump. It can be fixed to the ensure wheel that you can check balance more precisely. |
● MK-PLT Piston Lock Tool |
● Features |
Made with hard derlin that is strong and safe for piston lock. Suitable for standard, turbo type. |
● DR-LRS Brushless Motor Bearing Set for LRP Vector 2pcs |
● DR-NOS Brushless Motor Bearing Set for Novak 2pcs |
● DR-SOS Brushless Motor Bearing Set for Speed Passion, Orion 2pcs |
● Features of Brushless Motor Bearing series |
High quality Brushless motor Bearing. Available for LRP, Novak, Speed Passion. It can be used with Muchmore brushless bearing puller2 for easy maintenance. |
● SB-CM01 3mm Ceramic Diff Ball (12pcs) for Cyclone TC, Tamiya 415 |
● SB-CM02 1/16in Ceramic Thrust Ball (8pcs) |
● Features |
Accuracy and smoother than normal diff ball. Increases maintenance cycle of differential and diff ring life. |
● MK-APHB Antenna Pipe Holder Blue |
● MK-APHK Antenna Pipe Holder Black |
● Features |
Hold tight the antenna pipe. for race Available for Blue, Black |
We have 342 guests online