● MK-MCPS 540 Magic Commu Polisher |
Compatible with Tamiya Sport motor and Mabuchi RS-540SH motor. It is cleaning tool of commutator's carbon. Can be used for Tamiya race |
● MR-CBL Tire Scrub Brush Large - Nylon Bristle |
● MR-CBM Tire Scrub Brush Medium - Nylon Bristle |
● MR-CBS Cleaning Brush - Nylon Bristle |
● Features |
Available in 3 types. |
● MR-DMX Diff Master for X-RAY 008 & 009 |
● MR-DMT Diff Master for TAMIYA 416 |
● MR-DMH Diff Master for HB Cyclone |
● Features |
Diff maintenance tool, it helps you rebuild the ball diffrential on your touring car. These tools have two functions, the first is a diff ring holder with a small magnet on one side, diff ring can be attached and held easily for sanding smooth. The other side of the tool can be used as a diff stand, securely holding the ball diff and stabilizing it while tou insert the small diff balls and it also has a pin or a small block to hold the diff nut or screw. Available in 3 different type |
● MR-LBS Light Weight Setup Board for 1/10・1/12 (300×420×9mm) |
● MR-LBL Light Weight Setup Board for 1/8 (400×500×9mm) |
● Features |
Light weight setup board. Made with PB-wood and thin thickness reduces the weight. Board is hard plastic surface covered can be easily cleaned of dirt. MR-LBS Size : 300 x 420 x 9mm Weight : 0.8kg MR-LBL Size : 400 x 500 x 9mm Weight : 1.2kg Both item include Muchmore Logo sticker. |
● MR-MSK2 MINI-Z Set Up Board 2 Black (for MINI-Z,1/18car) |
● MR-MSB2 MINI-Z Set Up Board 2 Blue (for MINI-Z,1/18car) |
● MR-MSP2 MINI-Z Set Up Board 2 Purple (for MINI-Z,1/18car) |
● MR-MSC2 MINI-Z Set Up Board 2 Clear (for MINI-Z,1/18car) |
● MC1-50ZC Muchmore Cell 1 Cell IB5000 price rose de ZAP (approx.) 1,240 |
● MC4-50ZC Muchmore Cell IB5000 price rose four-cell de-ZAP (approx.) 4,780 |
● MC5-50ZC Muchmore Cell 5 Cell IB5000 price rose de ZAP (approx.) 5,380 |
● MC6-50ZC Muchmore Cell IB5000 price rose six-cell de-ZAP (approx.) 5,980 |
● MC24-50ZC Muchmore Cell 24 Cell IB5000 price rose de ZAP (approx.) 23,500 |
● Features of loose cells IB5000 Muchmore de Zapp
IB5000 Muchmore added to the lineup from loose cells using a series of cells.
The original Zap treatment has improved while retaining a large punch.
Since a wide range of combinations available: 6-cell 24-cell and cell 4 cell 5 cell 1 can be selected according to categories that are entertaining you.
Muchmore IB5000 battery case of a new battery management to exploit the full performance of the cell de-Zap also rose to state that the battery voltage is low there is a possibility that self-discharge.
After four cells formed a new battery please charge-5A. Then 5 ~ 10A discharge at a place, please.
Makes it possible performance out of the original break-in battery charging and discharging of the battery once.
Charging Base Set
Matchimoaserumasutashirizu
Charging current 4-5.0A
Delta Peak 06-18mV
Cutting temperature 48 °
Long Lockout 30 minutes
Charging current NI-MH 4 Mode-5.0A
Delta Peak LOW
Cutting temperature 48 °
From the state down to temperatures below 35 degrees after running the battery 2000mA Please save more while charging.
But may lead to long-term damage to the battery is discharged without long-term leave Dzuruto (more than 2 months) is not used, please charge once every two weeks.
Reuse is a first time 800-1000mA After charging, you can run to demonstrate the power of the original term by charging and discharge from each cell using single-cell single discharger Matchimoare .
If there is no single cell discharger if the master cell, a discharge mode discharges Please Sairentochaja 5A.
Appliances Series 100% better performance Matchimoabatteri withdraw the charge
● MC1-46V2ZC マッチモア4600HPC V2 ザップ 1セル 定価(税込) 1,365 |
● MC4-46V2ZC マッチモア4600HPC V2 ザップ 4セル 定価(税込) 5,250 |
● MC5-46V2ZC マッチモア4600HPCザップ 5セル入り 定価(税込) 5,880 |
● MC6-46V2ZC マッチモア4600HPC V2 ザップ 6セル 定価(税込) 6,615 |
● MC24-46V2ZC マッチモア4600HPC V2 ザップ 24セル 定価(税込) 25,725 |
● マッチモア4600HPC V2ザップセルの特徴 |
ご好評を頂いているマッチモア4600HPCセルをベースで以前の性能上回る新しく4600HPCのNEWタイプ「4600HPC Ver2」を開発しました。 パンチ・トルク感とも従来品を上回る性能を備えながらも、自己放電を抑えるなど耐久性を 向上させています。 ラインナップは今までの5セル・6セル・24セルに加えて、トゥエルブ(1/12)に 最適な4セルと1セルが加わりました。 マッチモア4600HPC V2ザップセルの性能をフルに引き出すバッテリー管理方法 新品バッテリーの場合は自己放電している可能性もありバッテリーの電圧が低くなっている状態もあります。 新品バッテリーセルを組んだ後4-5Aで充電してください。それから5~10A位で放電して下さい。 1回の充放電のバッテリー慣らしでバッテリー本来の性能を引き出すことが可能になります。 |
||||||||
充電基本セット マッチモアセルマスターシリーズ |
||||||||
|
||||||||
マッチモアサイレントチャージャーシリーズ | ||||||||
|
||||||||
走行後バッテリーの温度が35度以下まで下がった状態になってから2000mA以上充電をした状態で保存して下さい。 放電されたままで長期間放置づるとバッテリーが破損してしまう場合もありますので長期間(約2ヶ月以上)使用されない 場合は2週間に1回充電をして下さい。 |
||||||||
再使用時は、まず一度800-1000mA充電した後、マッチモアれシングの単セル放電器を利用して各セルの放電を行ってから 充電することで本来のパワーとランタームを発揮することが出来ます。 もし単セル放電器が無い場合はセルマスター、サイレントチャージャーの放電モードで5A放電して下さい。 |
||||||||
マッチモアバッテリーの性能を100%引き出す充方電器シリーズ |
||||||||
■ 関連お勧めのアイテム |
● MR-PBW Premium Balance Weight (Cut completion) |
Pre-cut Balance weight, to use cut the double side tape only. It prevents dirt and remains clean from dust. |
● MMH-UC Ultra Hard 2P Connector 1Set (Male & Female) |
● MMH-UCB Ultra Hard 2P Connector 3Set (Male & Female) |
● MMH-UCF Ultra Hard 2P Connector Female 4pcs |
● MMH-UCM Ultra Hard 2P Connector Male 4pcs |
It can be used to make easy plug adapters to between batteries, speed control and motors. For racers and hobbyists *When using with MMJ-HC. It may be difficult to connect. we recommended you use the same series. |
● MK-MCPJ 540Jonson Magic Commu Polisher |
● Features |
Compatible with Tamiya 540 jonson motor for cleaning of commutator's carbon. |
We have 360 guests online