TQ R/C & Hobbies

【 New Item 】

1/10 R/C Expert Built Series No.197

XB Plasma Edge II (TT-02B)

Item No：57897

★Polycarbonate body and rear wing are painted and markings already applied.　★Shaft-driven 4WD TT-02 chassis features 4-wheel double wishbone suspension equipped with CVA oil dampers.　★2.4GHz R/C system is pre-installed.
※Battery pack and charger are included for Japan market only.

Information is correct as of April 28, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.198

Mercedes-Benz G 320 Cabrio (MF-01X)

Item No：57898

G Whizz!
The Mercedes-Benz G-Class' outstanding durability and off-road performance have made it a firm favorite with consumers since its inception in 1979, its polished technology taken over and modernized with each generation to make it a top class SUV. This is a factory finished model of the G 320, a 2-door cabriolet produced between 1997 and 2001, and much sought-after thanks to its stylish looks and typically uncompromising G-Class performance. The boxy form has been realistically reproduced by the polycarbonate body which is pre-painted in silver with the soft top pre-painted in black. Canvas stitches on the soft top are depicted by stickers. Metal-plated part is used for the 3-star emblem on the front grille to heighten realism.

MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD MF-01X chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. This model pairs 7-spoke wheels and semi-pneumatic treaded tires for super performance whether on- or off-road.

2.4GHz Transmitter Included
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

Specifications
●Length: 385mm, Width: 177mm, Height: 180mm　●Wheelbase: 239mm (L)　●Tire Width/Diameter (Front & Rear): 30/77mm　●Tread (Front & Rear): 145mm　●Monocoque Frame　●Shaft-Driven 4WD　●3-Bevel Differential Gears　●2-Piece Steering Tie-Rod　●4-Wheel Double Wishbone Suspension　●Front & Rear Friction Dampers　●Gear Ratio=9.5:1　●Type 540 Motor and Electronic Speed COntroller (Forward/Reverse Type) included.

Separately Required Items
●R6/AA/UM3 batteries for transmitter

The information on this page is correct as of May 30, 2016. Specifications are subject to change without notice.

1/24 Sports Car Series No.343

FXX K

Item No：24343

An Uncompromising Track Car
The FXX K is an uncompromising car developed for an exclusive group of client-test drivers in the Ferrari XX program. Based on the mold-breaking LaFerrari hybrid car, every section has been tuned to maximize track performance. With cutting edge technology like the car’s HY-KERS hybrid kinetic energy recovery system, the powerful 6,262cc V12 engine produces an astonishing maximum output of 1,050hp. With only 30 examples produced in 2014, the FXX K is an elite presence even among modern super sports cars.

About the Model
★1/24 scale plastic model assembly kit of the FXX K. ★Length: 204mm. Width: 88mm. ★The model breathtakingly captures the FXX K form, right down to the side skirts extending from the sills, and rear cowling ducts. ★Interior features faithful depictions of the bucket seats, racing style dashboard, and rear view monitor-fitted center console. ★Highly detailed front/rear suspension, large brake discs and caliper parts. ★End sections of the silencer-less exhausts are metal-plated parts. ★Nylon mesh is included to recreate front air intakes and rear cowling openings. ★The 6,262cc V12 engine, transmission and parts of the HY-KERS hybrid system are depicted with great accuracy. ★Engine is mounted on a sub-frame integrated into the monocoque. ★Metal transfers included for realistic depiction of emblems and side mirror surfaces. ★Comes with decals to reproduce tire sidewall markings. ★Opening left/right doors and rear cowling.

Detail-Up Parts Series

1/24 FXX K Photo-Etched Parts Set

Item No：12668

★These photo-etched parts give supremely fine renderings of front spoiler air intakes and outlets, as well as seatbelt buckles for use with the included seatbelt stickers. The result is a highly effective finish.

Detail-Up Parts Series

1/24 FXX K Carbon Pattern Decal Set

Item No：12669

★The FXX K features plenty of carbon fiber components, which can be recreated with effectiveness using these decals. They depict three different types of surface pattern for awesome realism.

The information on this page is correct as of May 19, 2016. Specifications are subject to change without notice.

【 New Item 】

Tamiya Italeri Series　No.23

1/35 German Field Maintenance Team & Equipment Set

Item No：37023

★Extensive set great for German vehicle dioramas　★Parts recreate A-frame crane, compressor, gas cylinders, drums, Jerry cans and more.　★Comes with metal chain for the crane and 2 figures in realistic pose.

Information is correct as of April 28, 2016. Specifications are subject to change without notice.

1/32 Limited Edition Mini 4WD Product

Raikiri (MA Chassis) Japan Cup 2016

Item No: 95093

The Raikiri Goes All 2016!
Commemorate the Japan Cup 2016 festivities in style, with this special double shaft motor-powered Mini 4WD racer assembly kit. It includes the ever-popular Raikiri body, with a stylish white color scheme and specially designed stickers incorporating Japan Cup 2016 logos and motifs. The MA chassis is a speedy and reliable unit with its A parts molded in black. Y-spoke wheels are molded in bright red to make a big impression, and paired with super hard low-profile tires sporting the lettering "JAPAN CUP 2016 TAMIYA" in white.

The Ultra-Efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.

Specifications
★Length: 156mm ★Width: 97mm ★Height: 43mm ★Includes double-shaft motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is correct as of June 8, 2016. Specifications are subject to change without notice.

【 New Item 】

Grade-Up Parts Series No.498

HG Carbon Wide Front Plate (1.5mm)

Item No：15498

★This 1.5mm-thick carbon fiber plate provides superior rigidity and has attachment holes for 9mm, 11mm, 13mm and 19mm rollers. ★Compatible with MA, MS, AR, VS, Super-II and Super XX chassis cars.
※Some chassis/bodies may require modification.

Information is correct as of April 28, 2016. Specifications are subject to change without notice.

【 New Item 】

Grade-Up Parts Series No.499

HG Carbon Wide Rear Plate (1.5mm)

Item No：15499

★This 1.5mm-thick carbon fiber plate provides superior rigidity and has attachment holes for 9mm, 11mm, 13mm, 17mm and 19mm rollers. ★Compatible with MA, MS, AR, VS, Super-II, Super X, Super XX and Super TZ-X chassis cars.
※Some chassis/bodies may require modification.

Information is correct as of April 28, 2016. Specifications are subject to change without notice.

Great Construction

The use of a heat-resistant magnet attached steel case and double insulated windings,

high precision bearings, and rotor with a strong structure guarantees outstanding

performance and super durability.

High Torque

The 4 pole design will guarantee the motor to produce very large amounts of torque,

a much faster acceleration response and a very stable

output of power to the drivetrain.

High Efficiency

The output performance of this motor has an efficiency of up to 90%.

In the same load condition, XERUN 4274SD has the higher efficiency but lower

temperature than other 4274 motors.

Efficient Cooling Design

The aluminum ribbed heatsink housing can effectively reduce the motor temperature.

Compatible with the XERUN XR8 ESC

When pairing the XERUN 4274SD motor with the Hobbwing XERUN XR8 ESC,

the excellent match between ESC and motor will give you large torque

plus a very smooth and linear power band.

Wide Application

This motor is applicable to various 1/8th scale vehicles,

especially monster trucks.