TQ R/C & Hobbies

1/48 Military Miniature Series No.87

British 7ton Armored Car Mk.IV

Item No: 32587

Marked for Success
Mobile yet defensively capable armored cars were a necessity for forces in WWII, and the 7ton armored car filled that need amply for the British: featuring effective sloped armor, a fully-rotating turret and 4WD setup, it managed a top speed of 72km/h from its 90hp 6-cylinder engine. The Mk.IV was the final of its four variants and possessed the largest gun, with an upgrade from the previous 15mm machine gun to a 37mm weapon. It was also the most prolifically produced, and around 2,000 Mk.IVs rolled off the production line and into units across North-West Europe and Italy in the latter stages of WWII. The Mk.IV was called upon as a reconnaissance vehicle and even a command car.

About the Model
This is a 1/48 scale plastic model assembly kit of the British Mk.IV 7ton armored car. ★Length: 95mm, width: 48mm. ★Extensive study of the real thing ensures that this model captures the sloped form of the Mk.IV with great accuracy. ★An intuitive parts breakdown makes for hassle-free assembly. ★Features a realistic depiction of the vehicle underside. ★Choose to assemble with turret crew hatch open or closed. ★Comes with a commander torso figure. ★Markings included to recreate a Polish 1st Armoured Division vehicle.

The information on this page is current as of February 29, 2016. Specifications are subject to change without notice.

1/24 Sports Car Series No.176

Alfa Romeo 155 V6 TI Martini

Item No: 24176

A Hot Contender
The Martini-sponsored Alfa Romeo works team had an excellent 1996 season in the International Touring Car Championship (ITC), their 155 V6 TI taking on the might of Mercedes-Benz and Opel and coming away with an impressive 9 victories. Based upon the iconic Italian company's four-door 155 sedan, it was souped up with front spoiler, rear wing, diffuser and aerodynamic tweaks to the body shell. Its 450hp-plus 2.5l V6 employed the same pneumatic valve system run by Formula One cars, and had its power transmitted to all four wheels via a semi-automatic 6-speed transmission and electronically controlled front, rear and center differentials. Little wonder, then, that it had such a successful season!

About the Model
★This is a 1/24 scale plastic model assembly kit of the Martini-sponsored Alfa Romeo 155 V6 TI which appeared in the 1996 International Touring Car Championship. ★Length: 196mm, width: 80mm. ★The body is elegantly captured, including such details as the agressive front spoiler, large fenders and unique rear wing. ★Just like on the actual car, the front cowling can be removed, allowing you to display the engine room with powerful V6 and complex air ducts. ★Suspension and 4WD system are also given accurate depictions. ★The interior is kitted out with roll cage, pedals and other equipment for an authentic finish. ★High-quality Cartograf decals included to recreate distinctive Martini livery. Choose between No.5 and No.6 cars.

Information is correct as of February 12, 2016. Specifications are subject to change without notice.

Fully-Cowled Mini 4WD Series No.47

Beak Stinger G (AR Chassis)

Item No: 19447

Linking the Classic and the Modern
This plastic Mini 4WD model assembly kit creates the Beak Stinger G car which appears as the hero's rival machine in the popular Japanese comic "Let's & Go!! Return Racers!!" It is a fascinating fusion of inspiration from three classic 1990s Mini 4WD racers - the Brocken Gigant, Ray Stinger and Beak Spider. A silver ABS resin body comes with metallic stickers for decoration.

AR Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The underpanel and diffuser can be removed from the model without taking off the body, while a low-friction rear skid bar is fitted to slash time loss experienced on tricky slope sections, and keep the racer on the track where it belongs. Features red 5-spoke wheels, black low-profile tires and a 3.5:1 gear ratio.

Specifications
★Length: 155mm ★Width: 97mm ★Height: 44mm ★Includes motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

The information on this page is current as of February 25, 2016. Specifications are subject to change without notice.

Mini 4WD Product

Shadow Shark Italia Special (AR Chassis)

Item No: 95224

Bellissimo!
Add a touch of Italian verve to your Mini 4WD life with this Italia Special version assembly kit of the Shadow Shark! The tones of the Italian tricolor feature prominently, with white chassis parts, a bright red ABS resin body, green tires, plus white and green body marking metallic stickers.

AR Chassis
The AR chassis is designed to offer its driver durability, customizability and ease of maintenance, all of which are vital ingredients for a successful Mini 4WD racer. The Italia Special AR Chassis is molded in durable white polycarbonate-ABS, with matching white low-friction rollers, diffuser, skid bar and so on. Black carbon fiber-reinforced resin 3-spoke wheels are paired with green hard tires, evoking the Italian tricolor. Its aerodynamic form smoothly allows air to pass through the chassis interior as the machine runs, performing the vital function of cooling the batteries and motor and extending their effectiveness. The underpanel and diffuser can be removed from the model without taking off the body, while the rear skid bar slashes time loss on tricky slope sections, and keeps the racer on the track where it belongs. Features a 3.5:1 gear ratio.

Specifications
★Length: 155mm ★Width: 97mm ★Height: 43mm ★Includes motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

The information on this page is current as of February 25, 2016. Specifications are subject to change without notice.

Grade Up Parts Series No. 496

Avante Clear Body Set (Polycarbonate)

Item No: 15496

★That perennial favorite, the Avante Jr. body is now available in clear polycarbonate. ★Use this lightweight body for excellent acceleration and top speed, plus superior durability in the event of high-speed crashes. ★Comes with dedicated clear stickers to decorate the body.

Compatible Chassis
Super-1, Super-II, Super TZ, Super TZ-X ★some chassis may require body modifications

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.

Grade Up Parts Series No. 500

2mm Aluminum Lock Nut (Blue, 5pcs.)

Item No: 15500

★Make sure that your rollers, mass dampers, etc. stay securely tightened with these aluminum lock nuts. ★The resin section ensures that the nut stays securely fastened even during high-octane Mini 4WD races. ★These nuts come with a jazzy blue anodized finish to add a splash of color to your machine.

Compatible Chassis
All Mini 4WD and Mini 4WD PRO cars

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.

Grade Up Parts Series No. 501

Slimline Mass Damper Set

Item No: 15501

★This set includes 2 each of 2 different lengths of 7mm diameter mass damper, which measure 5.5mm (1.5g) and 11.5mm (3g) respectively. ★Their slimline form makes them great for use in cluttered spaces, and they are of a different weight to existing mass damper options, broadening your setting horizons.

Compatible Chassis
All Mini 4WD and Mini 4WD PRO cars (★Some chassis or bodies may require modification.)

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.

Mini 4WD Product

Hard Arched Tires (Blue) & Carbon Reinforced Large Dia. Narrow Wheels

Item No: 95254

★Liven up your Mini 4WD car with the help of this set, which includes carbon fiber-reinforced nylon resin large-diameter wheels and striking light blue hard arched tires. ★Arched tires have minimal contact with the racing surface, and are especially useful on technical circuits loaded with corner sections.

Compatible Chassis
All Mini 4WD and Mini 4WD PRO cars capable of running large-diameter tires
(★Some chassis or bodies may require modification.)

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.

Mini 4WD Product

AR Fluorescent-Color Chassis Set (Green)

Item No: 95255

★Everyone will see your AR chassis machine coming once you've fitted it with these hi-visibility fluorescent green parts! ★At the time of release, no AR chassis kit featured parts in this color. ★Matching fluorescent green A parts (underpanel, diffuser, etc.) are also included.

Compatible Chassis
AR Chassis

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.

Mini 4WD Product

Super-II Reinforced Chassis (White)

Item No: 95256

★Don't take any chances - choose durability with this set of PC-ABS parts for the widely-used Super-II chassis. They are more resilient than kit standard ABS parts. ★The kit also includes ABS A parts (rollers, etc.) and J parts (gear cover).

Compatible Chassis
Super-II Chassis
(★Please note that as this material is reinforced, screw fit may be tight.)

The information on this page is current as of February 10, 2016. Specifications are subject to change without notice.