TQ R/C & Hobbies

Limited Edition R/C Product

Holiday Buggy (2010) (Red Edition)
Item No：84212　
【 Special Color Edition 】　This is a 1/10 scale electric R/C assembly kit of the popular Holiday Buggy (2010) in a different body/wheel color combination featuring a red body with black wheels. The DT-02 chassis features a 4-wheel double wishbone suspension, and its simple, durable construction makes for easy assembly. The durable soft resin body can be finished by simply applying included markings and features a semi-finished driver figure wearing a cowboy hat for enhanced realism. ※Please note that the body shell is made from impact-resistant material and cannot be painted with standard paints.

【 Fun-to-Drive DT-02 Chassis 】　The bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with coil spring damped units to provide superb off-road traction. A sealed gearbox protects against sand and debris and is equipped with differential gears to efficiently transmit the power from the type 380 motor. By installing separately available Type 540 motor and corresponding pinion gear, more powerful driving can be enjoyed.

【 Specifications 】　●Length: 390mm, Width: 240mm, Height: 164mm ●Wheelbase: 260mm ●Ground Clearance: 26mm ●Weight: 1250g ●Type 380 Motor Included ●Rear Wheel Drive 2WD ●Tire Width/Diameter: F=22/81mm, R=39/86mm　●Tread: F/R=217mm/208mm ●3-Bevel Differential Gear ●2-Piece Steering Tie-Rod ●F/R Double Wishbone Suspension ●Gear Ratio=15.77:1

【 Separately Required Items 】　　●Finespec FM Radio Control System w/ESC　●Battery Pack and compatible charger ●R6/AA/UM3 Batteries (x8) for Transmitter
【 Upgrade Your Car! 】

■Install Ball Bearings

Replace plastic bearings with 1150 ball bearings to help minimize friction loss and ensure smooth power transfer.

・Item 53008 1150 Sealed Ball Bearing Set (4pcs.)
・Item 53029 1150 Sealed Ball Bearing Set (2pcs.)
※14pcs. of 1150 ball bearings may be installed (Item 53008ｘ3sets + Item 53029ｘ1set).

■Replace Motor

By installing separately available Type 540 motor and corresponding pinion gear, more powerful driving can be enjoyed. Select either motor listed below.

・Item 53689 540-J Motor
・Item 53068 Sport-Tuned Motor

※Following parts also required.
・Parts Code 13515005 17T Pinion Gear
・Parts Code 14305125 Motor Plate
・Item 50576 3mm Grub Screw (10pcs.)
Specifications are subject to change without notice.

【 New Item 】

1/10 Electric R/C Car Series No.495

Ford F-150 1995 (Baja Version)
Item No：58495　
★This is a 1/10 scale R/C assembly kit of a SCORE desert racing series Baja 1000-inspired Ford F-150 trophy truck.　★The body reproduces the dynamic form of the truck and the large tires further enhance its presence.　★The full-time 4WD TA02T chassis is equipped with a double wishbone suspension, allowing you to enjoy exciting off-road R/C action. *2-channel R/C units sold separately.

Information and specifications coming soon.

1/10 Expert Built Series No.116

XB Mazda RX-7 (M-06)
Item No：57816　
【 Rotary-Powered Beauty 】　In 1978, Mazda Motor Corporation announced the debut of the first RX-7, which featured an impressive rotary engine. This famous sports car is reproduced as a 1/10 scale ready-to-run R/C model. The polycarbonate body captures the beautiful form of the RX-7 including the features of the late-type model such as refined front nose and wider sides. This accurately reproduced body is mounted on the M-06 chassis, which offers nimble performance just like the actual RX-7.

【 R/C Units, Battery Pack, and Charger 】 　R/C units are installed onto the pre-assembled chassis and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. The FM transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation. (*Battery pack and charger are included for Japan market only.)

【 Improved RR Performance 】　The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup. The chassis layout features a longitudinally-mounted battery pack with R/C units positioned on either side for optimum balance and a low center of gravity. The 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear to provide excellent grip and stability. In addition, 3-piece steering linkage offers nimble handling performance.

【 Specifications 】　●Length: 419mm, Width: 170mm, Height: 120mm　●Wheelbase: 239mm　●Tread(F/R): 138mm　●Rear-Motor, Rear-Wheel Drive　●3-Bevel Differential Gear　●3-Piece Steering Tie-Rod　●F/R Double Wishbone Suspension　●F/R Friction Dampers　●Gear Ratio=5.8 :1　●RS540 Type Motor Included ●Tire Width/Diameter (F/R): 26mm/60mm　●Forward/Reverse Electronic Speed Controller Included　※R6/AA/UM3 batteries for transmitter separately required

Specifications are subject to change without notice.

【 New Item 】

Limited Edition R/C Product

Leopard 2 Die-Cast Metal Suspension Arms
Item No：84216　
★This set includes die-cast metal suspension arms for the 1/16 scale R/C Leopard 2. ★These suspension arms offer superb strength to further enhance the durability of the suspension system.

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

Die-Cast Metal Tracks For 1/16 Scale R/C Pershing (T81)
Item No：84217　
★These die-cast metal tracks for the 1/16 scale R/C Pershing tank depict T81 tracks fitted onto early M26 Pershings at the end of WWII. ★Die-cast metal drive sprockets are also included. ★Each track come with a sand blasted finish and provides the model with greater scale presence.

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

Die-Cast Metal Tracks For 1/16 Scale R/C Panzerkampfwagen IV
Item No：84218
★These die-cast metal tracks for the 1/16 scale R/C German Panzer IV provides a greater level of realism and highlights the heaviness of your R/C tank. ★Each track features precise molding and comes with a sand blasted finish.

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

Die-Cast Metal Tracks For 1/16 Scale R/C KV-1 ・ KV-2
Item No：84219　
★These die-cast metal tracks for the 1/16 scale R/C Russian KV-1 and KV-2 provide a heightened level of realism and highlight the heaviness of your R/C tank. ★Each track features precise molding and comes with a sand blasted finish.

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

1/16 Scale R/C Leopard 2 Die-Cast Metal Track Tensioners
Item No：84220　）
★These are die-cast metal track tensioners for the 1/16 scale R/C Leopard 2. ★These tensioners give your model's suspension greater strength and enables the adjustment of track tension in fine increments.

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

1/16 Scale R/C Sherman Die-Cast Metal Idler Wheels

Item No：84221　

★These die-cast metal idler wheels for the 1/16 scale R/C Sherman features detailed moldings to provide the model with greater scale presence. ★Each wheel is equipped with a ball bearing to enable smooth wheel rotation. ★Compatible with 1/16 R/C M4 Sherman and M51 "Super Sherman."

Information and specifications coming soon.

【 New Item 】

Limited Edition R/C Product

1/16 Scale R/C Sherman Die-Cast Final Drive Covers
Item No：84222　
★These die-cast metal idler wheels for the 1/16 scale R/C Sherman features detailed moldings to provide the model with greater scale presence. ★Each wheel is equipped with a ball bearing to enable smooth wheel rotation. ★Compatible with 1/16 R/C M4 Sherman and M51 "Super Sherman."

Information and specifications coming soon.