TQ R/C & Hobbies

The exciting world of 200mm 1:10 GT racing… synonymous with “speed,” “precision,” and “champions.” The ideal class for XRAY to unveil its latest engineering masterpiece: the XRAY X10 “GT version.”

Based on the all-new XRAY XII 1:12 pan-car, XRAY Project Manager Martin Hudy created the perfect platform to dominate the new World GT class of 200mm 1:10 pan cars. 

Knowing that the X10 would need a versatile design — participating in classes with either open-tire rules or spec-tire rules — particular attention was paid to the rear end of the car to give it the perfect combination of rear traction, corner speed and steering under any conditions. Well-proven yet “conventional” T-bar technology again proved to make for faster and more consistent handling.

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum and highest-grade graphite are part of XRAY’s signature, and the X10 has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the X10 achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together, with many parts fully compatible between the X10 and XII platforms.

The XRAY pedigree is carried over into the X10, allowing for a car that is very easy to build and dial in for any level of RC racer. Setup and tuning could not be easier, and exquisite quality and customer service are our promise to you. Get the holeshot, lead the pack, take the win with the new XRAY X10.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

XRAY has taken its X10 pan car to the next level with the introduction of the now industry-standard linkage rear end. The X10 Link is now truly a universal platform that conforms and adapts to current rules and trends in allowing the use of either NiMH or LiPo battery technology with no ill-effects to handling or balance.

The X10 Link has been designed to be driven and win on any club track around the world, under any conditions. Whether soaking up bumps on a rough asphalt club track or slicing through the infield of a super-smooth carpet track, the X10 Link does it with ease and versatility.

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum, and premium-grade graphite are part of XRAY’s signature, and the X10 has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD programs and tools, and manufactured using the world’s best machining and molding machinery, the X10 Link achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together, with many parts fully compatible between the X10 and XII platforms.

The XRAY pedigree is carried over into the X10 Link, making this a car that is very easy to build and dial in for any level of RC racer. Set-up and tuning are done very easily, and exquisite quality and customer service are our promise to you. Get the holeshot, lead the pack, take the win with the new XRAY X10 Link.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

XRAY is pleased to offer the all-new XRAY T3R, the latest release from the XRAY design studio that will surely please the masses. The XRAY T3R represents the latest evolution of the super-successful RAYCER concept – luxury at an affordable price. 

The new XRAY T3R is based on the award-winning XRAY T3 high-performance electric touring car plat form, a car that has raised the bar in engineering, design, and performance and has won the hearts of racers worldwide along with an exceptional amount of titles and awards.

With the worldwide success of the T3 platform — my best touring car design to date — I wanted to release a platform that would allow everyone to enjoy the design and performance benefits of the T3 platform no matter what their racing needs and budget are.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Martin Hudy
T3 Designer, XRAY

The Saga Continues

XRAY has long been viewed as the highest-quality and best-performing touring car available since it arrived on the RC car scene in 2000. Now with a long and distinguished history of racing achievements and groundbreaking, award-winning innovations, XRAY is proud to offer the 2011 version of the T3 platform… a top-quality “no-compromise” engineering marvel designed to put you in the Winners Circle.

Revolution, evolution, optimization… those are the key terms that describe the T1 and T2 platforms brought forward to the racing world in the last decade, and the new T3 carries with it all the heritage and racing pedigree to again raise the standard even higher. XRAY Research & Development along with the Factory Team have devoted themselves to extensive testing, all in the effort to bring to the consumer the latest evolution year after year. The T3 platform has been redesigned and improved for 2011, raising the bar once again. No extras needed… just a desire to win.

pure DESIGN. pure ADRENALINE. pure RACING.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

XRAY quality… ready to run…

Introducing XRAY's NT18T RTR kit… XRAY quality, built in the box!

XRAY’s nitro micro truck - the NT18T - now comes fully assembled with an XRAY premium radio system and electronics set, creating a world-class RTR set. Assembled in the European XRAY factory, the ready-to-run micro nitro truck is ready to hit the track or your backyard!

The RTR package includes everything you need to get your NT18T running in a matter of minutes. The easy-to-use instructions describe how to easily and safely perform the required engine break-in process to get the most out of your NT18T. The fully assembled and electronics-equipped truck comes with a highly-detailed painted, trimmed and decaled truck body. Radio system is available on world-friendly frequencies.

XRAY NT18T Professional 1/18 4WD shaft-drive nitro micro truck
• the world’s first 1/18 4WD shaft-drive nitro off-road truck 
• powerful 0.8cc nitro engine with tuned exhaust system
• super fast — more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• steel spur gear for dusty tracks
• front and rear adjustable ball differentials 
• fully independent and adjustable front and rear suspension
• oil-filled coil-over shocks
• front & rear anti-roll bars
• servo saver included
• micro truck tires included

• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• powerful disk-brake system
• super-efficient, ball-bearing supported drivetrain
• steel clutchbell with integrated pinion gear

XRAY Electronics installed in the NT18T RTR:

• high-capacity receiver battery pack
• two XMS01 metal-gear servos
• pre-wired on/off switch with cables
• XT1 AM high quality radio system

Charger and charging cable not included in the kit.

XRAY NT18T Professional 1/18 4WD shaft-driven micro nitro truck
• the world's first 1/18 nitro off-road truck
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 24 high-speed bearings for maximum efficiency and speed 
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear adjustable ball differentials
• adjustable shock position for damping adjustment
• oil-filled coil-over shocks
• servo saver included
• front and rear anti-roll bars
• adjustable turnbuckles
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• 36pc nickel-coated steel pivot balls throughout the suspension
• steel spur gear for dusty tracks
• accepts standard electronics

This kit includes the #389103 XRAY Micro Nitro Electronic Pack (Receiver Battery, 2x Servo, Switch+Cables) which includes electronics specially designed for the XRAY NT18 and NT18T. The Electronic Pack includes one Receiver Battery Pack, two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables.

"I am extremely proud that XRAY has proved once again to be the innovation and design leader in RC world, creating new revolutionary ideas, and setting new trends and standards by introducing the world's first micro nitro on-road car - the XRAY NT18."

The heritage of XRAY excellence continues as we proudly present... the world's first micro nitro off-road truck - the XRAY NT18T.

Dipl. Eng. Juraj Hudy, chief designer, XRAY

Main features:

• the world's first 1/18 nitro off-road truck
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel
• accepts standard electronics

• drivetrain includes 24 high-speed bearings for maximum efficiency and speed 
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear adjustable ball differentials
• adjustable shock position for damping adjustment
• oil-filled coil-over shocks
• servo saver included
• front and rear anti-roll bars
• adjustable turnbuckles
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• 36pc nickel-coated steel pivot balls throughout the suspension
• steel spur gear for dusty tracks
• accepts standard electronics

Technical specifications:

• length (without body): 208mm
• wheelbase: 150mm
• front width (outside rims): 178mm
• rear width (outside rims): 180mm
• front caster: 12.3°
• approx. running weight: 690 g
• internal gear ratio: 2.5

Included:

• XRAY NT18 engine 0.8cc & muffler
• racing style dish wheels
• rubber low pin tires with foam inserts 
• 1/18 racing truck body included 
• HUDY phillips screwdriver for comfortable assembly

XRAY NT18 engine 0.8cc

• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 16T clutch bell
• silicone fuel tubing

XRAY quality… ready to run…

Introducing XRAY's NT18MT RTR kit… XRAY quality, built in the box!

XRAY’s nitro micro monster truck - the NT18MT - now comes fully assembled with an XRAY premium radio system and electronics set, creating a world-class RTR set. Assembled in the European XRAY factory, the ready-to-run micro nitro monster truck is ready to hit the track or your backyard!

The RTR package includes everything you need to get your NT18MT running in a matter of minutes. The easy-to-use instructions describe how to easily and safely perform the required engine break-in process to get the most out of your NT18MT. The fully assembled and electronics-equipped truck comes with a highly-detailed painted, trimmed and decaled truck body. Radio system is available on world-friendly frequencies.

XRAY NT18MT Professional 1/18 4WD shaft-drive nitro micro truck
• the world’s first 1/18 4WD shaft-drive nitro off-road monster truck 
• powerful 0.8cc nitro engine with tuned exhaust system
• super fast — more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum chassis
• integrated 1-piece moulded radio tray
• top deck for maximum stability
• powerful disk-brake system
• super-efficient, ball-bearing supported drivetrain
• steel clutchbell with integrated pinion gear

• steel spur gear for dusty tracks
• front and rear adjustable ball differentials 
• fully independent and adjustable front and rear suspension
• maximum suspension uptravel
• 8x oil-filled coil-over shocks
• servo saver included
• micro monster truck tires included

XRAY Electronics installed in the NT18MT RTR:

• high-capacity receiver battery pack
• two XMS01 metal-gear servos
• pre-wired on/off switch with cables
• XT1 AM high quality radio system

Charger and charging cable not included in the kit.

"I have been a diehard nitro fan since my teenage years. When we designed XRAY M18, the micro 1/18 car, in the back of my mind I had an idea of creating something new, something revolutionary, something avant-garde --- a nitro powered 1/18 touring micro car. I have now made my dream come true." 


Dipl. Eng. Juraj Hudy, chief designer, XRAY

Main features:

• the world's first 1/18 nitro touring car
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 18 high-speed bearings for maximum efficiency and speed 
• ultra low center of gravity
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear gear differentials
• adjustable shock position for damping adjustment
• coil-over shocks for precise chassis handling
• adjustable body posts
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum 1.5mm chassis
• integrated 1-piece moulded radio tray
• accepts standard electronics

Technical specifications:

• front width: adjustable 98-101mm
• rear width: adjustable 104-107mm
• length: 215 mm
• wheelbase: 150mm
• front/rear camber: -1° (present)
• front caster: 12° (preset)
• front toe: 0.5° toe-out preset (adjustable option)
• rear toe: 4° toe-in preset (adjustable option)
• down stops: front/rear down stops preset (adjustable option)
• ride height: 3~4mmm
• weight: 422 g
• approx. running weight: 530 g

Included:

• XRAY NT18 engine 0.8cc & muffler
• set of foam tires 
• 1/18 micro body 150mm
• front foam bumper
• HUDY phillips screwdriver for comfortable assembly

XRAY NT18 engine 0.8cc

• uses standard model car fuel
• standard glow-plug design
• durable construction
• large, billet blue anodized aluminum heatsink
• slide adjustable carburator
• dual needle aluminum carburator
• 2 shoe aluminum clutch
• T6 aluminum flywheel
• polished muffler
• HUDY steel 23T clutch bell
• silicone fuel tubing

XRAY NT18 Professional 1/18 4WD shaft-driven micro nitro touring car
• the world's first 1/18 nitro touring car
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine 
• super fast - speed more than 50km/hour (30mph)
• easy to drive and handle
• excellent fun and RC enjoyment
• works with any standard RC fuel

• drivetrain includes 16 high-speed bearings for maximum efficiency and speed 
• ultra low center of gravity
• maximum drive train efficiency
• fully independent front and rear suspension
• front and rear gear differentials
• adjustable shock position for damping adjustment
• coil-over shocks for precise chassis handling
• adjustable body posts
• 30cc capacity fuel tank with hypertonic tank lid, and internal stone type filter
• CNC-machined Swiss T6 7075 aluminum 1.5mm chassis
• integrated 1-piece moulded radio tray
• accepts standard electronics

This kit includes the #389103 XRAY Micro Nitro Electronic Pack (Receiver Battery, 2x Servo, Switch+Cables) which includes electronics specially designed for the XRAY NT18 and NT18T. The Electronic Pack includes one Receiver Battery Pack, two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables.