TQ R/C & Hobbies

Gold plated connectors offered as a male/female set (#05021), male 2 piece set (#05022) and female 2 piece set (#05023).

Colored silicon wire offered in black, pink, green, and yellow. 12 gauge, 13 gauge and 15 gauge is available. 15GA Black/Pink (#75105), 15GA Green/Yellow (#75106), 13GA Black/Pink (#75101), 13GA Green/Yellow (#75102), 12GA Black (#75107), 12GA Pink (#75108), 12GA Green (#75109).

Servo horns come three in a pack. Made of durable plastic with an aluminum color. Colors offered are Black (#36012), Orange (#36017) and Green (#36018).

The ultimate booster is an upgrade replacement for the shotki diode double version. Includes silicon wires for easier connection to the motor.Item #45519

Stealth solder contains 96.5% Tin and 3.5% Silver for low resistance and is lead free.

VFS-1 BMC v1.5 #40051

Version 1.5 of the BMC has proved itself at the ROAR Carpet Nationals with 3 TQ positions and two wins in it's first outting. Five new preset programs and now you can adjust the drag brake through the setup switch in 10% increments (OFF-50%). All specs are the same as the original 1.0 version, but you will also be able to take advantage of the Stock Motor Manager for increased speeds.

All v1.5 now include the added ROAR Spec function to comply with the NO timing class. The switch LED will flash at neutral to indicate that 0 timing has been set to the ESC.

Specifications:

The VFS-1 BMC uses KO PROPO's patented VFS technology.
Five preprogrammed settings
Overheat & Current Overload protection equipped
Motor Limit: 4.5T (with heat sink and fan installed, 2.5T)
Size: 33.4 x 37.0 x 16.8 (mm)  Weight: 30.8g
Max Peak Current: 3120A (FET Specifications)
Max Continuous Current: 780A (FET Specifications)

VFS technology allows you to program and fine tune:
Drive frequencies (2KHz~12.0KHz) for 32 throttle steps for more control/efficiency
Brake Frequency (500Hz~2.5kHz) 64 settings
Drag Brake (off~255 step adjustment)
Three battery settings [NiMh (4C), NiMh (5,6C), LiPo(2S)]
For setting help click here.

VOLTAGE:    6V or 7.4V
TORQUE @6V:      200.1 oz-in, 14.5 Kg-cm
TORQUE @7.4V:   242.9 oz-in, 17.6 Kg-cm
SPEED@6V:       0.07 S @ 60°
SPEED @ 7.4V:  0.06 S @ 60°
BEARINGS:        YES, DBL
LEAD CONNECTOR:    GOLD PLATED
GEARS:    FULL METAL
WEIGHT:    70.5 g
SIZE:    41x37.5x20 mm

The RSx Response H.C. (Hard Case) is designed for ultimate rigidity while still providing high speed. This servo comes ready to operate at 6V or 7.4V.

Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.

Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and 1/10th GP on-road.

VOLTAGE:    6V or 7.4V
TORQUE @6V:      200.1 oz-in, 14.5 Kg-cm
TORQUE @7.4V:   242.9 oz-in, 17.6 Kg-cm
SPEED@6V:       0.07 S @ 60°
SPEED @ 7.4V:  0.06 S @ 60°
BEARINGS:    YES, DBL
LEAD CONNECTOR:    GOLD PLATED
GEARS:    FULL METAL
WEIGHT:    65.6 g
SIZE:    41x38x20 mm

The RSx Response is designed to providing high speed. This servo comes ready to operate at 6V or 7.4V.

Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.

Recommended for use on steering for 1/8th off-road buggy, 1/8th on-road and all 1/10th scale vehicles.

VOLTAGE:    6V or 7.4V
TORQUE @6V:      362.9 oz-in, 26.3 Kg-cm
TORQUE @7.4V:   436.1 oz-in, 31.6 Kg-cm
SPEED@6V:       0.13 S @ 60°
SPEED @ 7.4V:  0.11 S @ 60°
BEARINGS:        YES, DBL
LEAD CONNECTOR:    GOLD PLATED
GEARS:    FULL METAL
WEIGHT:    70.5 g
SIZE:    41x37.5x20 mm

The RSx Response H.C. (Hard Case) is designed for ultimate rigidity while providing high torque. This servo comes ready to operate at 6V or 7.4V.

Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.

Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.

The RSx Response is designed for ultimate rigidity while providing high torque. This servo comes ready to operate at 6V or 7.4V.

Programming of this servo will also be available via PC or ICS setting card for the RSx for further fine tuning.

Recommended for use on steering for 1/8th off-road truggy, throttle for 1/8th off-road buggy/truggy and throttle for 1/8th on-road.