【 New Item 】
Grade-Up Parts No.421
Gold Plated Terminal Set (for Super-II Chassis)
Item No:15421
★Gold plated terminal connectors are rust-resistant and highly conductive of electricity. ★These terminals stand up well to the rigors of racing, and will improve efficiency of battery power transmission for stable and reliable Mini 4WD running.
Information and specifications coming soon.
【 New Item 】
Craft Tool Series No.97
Fine Craft Saws II (for Scribing)
Item No:74097
★This set of thin craft saws is made from photo-etched metal and can be used for applying panel lines. ★The blades feature grips which can be folded over to increase support.
Information and specifications coming soon.
Tamiya R/C System Series No.45
EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET)
Item No:45045
【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form. The ideally placed steering wheel and trigger offer a user-friendly layout. This set does not include an ESC to allow you to use your desired ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.
<NOTE>ESCs without BEC such as TEU-101BK and TEU-104BK are not compatible with the receiver.
【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.
【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In ●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8~6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g ●Servo: TP-S3003 Power Supply: 4.8~6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g
【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.
Tamiya R/C System Series No.46
EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET + ESC)
Item No:45046
【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form. The ideally placed steering wheel and trigger offer a user-friendly layout. This set includes a TEU-302BK ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.
【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.
【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In ●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8~6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g ●Servo: TP-S3003 Power Supply: 4.8~6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g ●ESC: TEU-302KB Control System: High Frequency Wave Drive System, Max. Continuous Current (FET Spec): Forward 120A, Reverse 60A, Power Supply: 7.2~8.4V, Compatible Motor: Electric Motor for R/C cars (over 23 turns), Drive Frequency: 500Hz, 1kHz, 2kHz (with 3 steps), Output Voltage for Receiver: 6V (Input 7.2V), Dimensions: 33.5×27.2×14.3mm (excluding protrusions), Weight: 48g (body 43g)
【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.
【 New Item 】
Display Goods
Display Turntable (Black)
Item No:89927
★This black colored Turntable allows you to leisurely view your finished model from various angles. ★The set includes mirror type and brick-wall patterned table sheets. High and Low selectable turntable speed. ★Table diameter: 20cm.
Specifications are subject to change without notice.
【 New Item 】
Finishing Material Series No.125
15 Well Palette (5pcs.)
Item No:87125
These Palettes are made of PET plastic and each palette contains 15 wells, including 9 round (Dia: 25mm/Depth: 9mm) and 6 five-sided (Depth: 9mm) sections. The palette is 0.3mm thick and each section can be easily cut away with scissors and be disposed of after each use.
Specifications are subject to change without notice.
【 New Item 】
Masterwork Collection
1/48 Mitsubishi A6M3a Zero Fighter 582nd Naval Air Group (Finished Model)
Item No:21093
★This is a 1/48 scale finished display model of the Mitsubishi A6M3a Zero Fighter from 582nd Naval Air Group. ★Markings depict the aircraft piloted by major Saburo Shindo. ★Metal gun barrels and photo-etched landing gear position indicators included. ★1 seated pilot figure included.
Information and specifications coming soon.
【 New Item 】
Masterwork Collection
1/48 Mitsubishi A6M3 Zero Fighter Iwakuni Naval Air Group (Finished Model)
Item No:21092
★This is a 1/48 scale finished display model of the Mitsubishi A6M3 Zero Fighter from Iwakuni Naval Air Group. ★Photo-etched parts depict landing gear position indicators included. ★Weathering is applied to achieve realistic finish. ★1 seated pilot figure included.
Information and specifications coming soon.
【 New Item 】
1/35 Military Miniature Series No.313
U.S. Light Tank M5A1 "Pursuit Operation" Set (w/4 Figures)
Item No:35313
★1/35 scale plastic assembly kit of the U.S. Light Tank M5A1 with 4 figures. ★4 figures and 2 types of markings included.
Information and specifications coming soon.
【 New Item 】
1/35 Military Miniature Series No.312
U.S. Howitzer Motor Carriage M8 "Awaiting Orders" Set (w/3 Figures)
Item No:35312
★1/35 scale plastic assembly kit of the U.S. Howitzer Motor Carriage M8 with 3 figures. ★Open top turret, howitzer, and overall form reproduced in rich detail. ★Commander, gunner, and loader figures included.
Information and specifications coming soon.
We have 609 guests online