TQ R/C & Hobbies

TRF Series No.67

TRF201 Chassis Kit

Item No：42167

【 A 2WD Thoroughbred 】 The TRF team has used their world championship knowledge to create the TRF201 to challenge the very exciting R/C 2WD Buggy class. The TRF201 features a new chassis frame which has a longitudinal battery position with R/C units placed on either side for optimum balance and is designed to offer low center gravity and a plenty of ground clearance thanks to its skid-shaped underside. The motor is mounted at the rear to provide ample of traction, and the new compact gearbox is equipped with a ball differential, ball thrust bearing, and traction control slipper clutch. Furthermore, the suspension is coupled with new long-span suspension arms and aeration dampers to enable superb control during high-speed off-road driving.

【 Specifications 】 ●High-Traction Bathtub Type Chassis ●Traction Control Slipper Clutch ●Inch-Sized Diff Balls ●WO Universal Shafts ●Aeration Oil Dampers (HL Coated Cylinders ＆ Titanium Coated Piston Rods) ●New Front Coil Springs ●Titanium Turnbuckle Shafts (Blue) ●New Front Wheels (IFMAR Spec) ●Steering Crank with Built-In Servo Saver ●Full Ball Bearings

【 Specifications 】 ●Length: 382mm (when body and rear wing installed) ●Width: 249mm ●Wheelbase: 272mm ●Tread： Front=249mm, Rear=244mm ●Bathtub Type Chassis Frame ●Rear Motor Rear Wheel Drive 2WD ●Ball Differential ●3-Piece Steering Tie-Rod with Titanium Turnbuckle Shafts ●4-Wheel Double Wishbone Suspension ●Aeration Dampers ●Gear Ratio＝8.01～10.27 ●Full Ball Bearings ●Body and rear wing sold separately ●Requires separately sold motor and ESC.

【 Separately Required Items 】 ●Body, Rear Wing, Tires, Motor, Pinion Gear ●2-Channel R/C Unit with ESC ●Tamiya Battery Pack ●R6/AA/UM3 Batteries for Transmitter (x8)

【 Setting Sheet 】●Blank Sheet

Specifications are subject to change without notice.

Tamiya Airbrush System No.39

Spray-Work Airbrush Stand II

Item No：74539

This airbrush stand will greatly help you with painting at your work area. This stand consists of a tray-type base and two airbrush hangers which enable placement of two airbrushes at the same time and is compatible with all Tamiya airbrushes except for Tamiya Badger airbrushes. In addition, spare bottles can be placed onto the base and stirrer sticks can be attached to the stay. Long pipette is also included.

Specifications are subject to change without notice.

Limited Edition Mini 4WD

Shadow Breaker Z-3 Super XX Special

Item No：94735

【 Special Color 】 ★The Shadow Breaker Z-3 now comes released as a special version featuring gun metal body and beautiful metallic stickers. ★Polycarbonate reinforced ABS resin Super XX chassis comes in light blue color. ★Carbon reinforced nylon resin small diameter wheels are equipped with white hard wide tires.

【 Specifications 】 ●Length: 153mm ●Width: 98mm ●Height: 38mm ●Motor included ●Snap-on easy assembly

【 Separately Required Items 】 ●R6/AA/UM3 batteries (x2)

Specifications are subject to change without notice.

Grade-Up Parts No.411

Reinforced N-04/T-04 Units (Red)

Item No：15411

This unit is made from durable polycarbonate reinforced ABS resin (red) and includes 3 different bearing sections to enable fine settings according to the course layout.

Specifications are subject to change without notice.

Grade-Up Parts No.414

Narrow Large Dia. Wheel & White Arched Tires (For Super X & XX Chassis)

Item No：15414

★The set includes carbon reinforced narrow large diameter 3-spoke wheels and white arched tires.

1/10 R/C Limited Edition

M-05 PRO Chassis Kit (Blue Plated Version)

Item No：84131

【 Limited Release Blue Version 】 The immensely popular M-05 PRO chassis now comes released as a special blue-plated version assembly kit. The eye-catching blue-plated resin chassis frame and damper stays as well as clear blue damper cylinders enhance the racing aura. In addition, to name it PRO, the kit comes standard with many Option Parts such as Aluminum Servo Horn and Aluminum Rear Uprights.

【 3 Wheelbase Lengths/Plenty Body Choice 】 Battery pack, motor, and R/C unit are positioned lower than the tire height for optimum weight distribution and a low center of gravity. Three wheelbase lengths are possible (210mm/225mm/239mm) by simply switching the position of parts from the rear suspension. The chassis is compatible with M-03 chassis bodies, providing you with a wide range of body choice. The 60D radial tires with realistic tread pattern are mounted on the black plated 11-spoke wheels.

【 Main Equipment 】 ●M-03R Aluminum Rear Uprights (Blue) ●Hi-Torque Servo Saver ●Aluminum Horn for Hi-Torque Servo Saver ●CVA Oil Damper Super Mini (Clear Blue Cylinder) ●Short Springs for TRF Dampers (Soft/Medium/Hard) ●1150 Ball Bearings ●850 Ball Bearings ●Aluminum Ball Connectors (Blue) ●5mm Aluminum Ball Connector Nuts (Blue) ●2.0mm Setting Spacers (Blue) ●3.0mm Setting Spacers (Blue) ●4mm Aluminum Flange Lock Nuts (Blue)

【 Specificaions 】 ●Chassis Length: 299mm (when assembled in 239mm wheelbase), Chassis Width: 165mm 
●3 Wheelbases (210mm, 225mm, 239mm) can be assembled. ●Tread (Front & Rear): 138mm ●Front-Mounted Motor Front Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension 
●Front & Rear CVA Oil Damper Super Mini ●Gear Ratio=5.8 :1 ●Tire Width/Diameter (Front & Rear)＝25/59mm 
●Requires Electronic Speed Controller (sold separately).

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter (x8)

Specifications are subject to change without notice.

Limited Edition Mini 4WD Parts

Front Under Guard (Red)

Item No：94736

The popular Front Under Guard now comes in a bright red color. It is compatible with normal and wide roller settings and the skid angle provides brake effect.

Specifications are subject to change without notice.

Craft Tool Series No.94

Fine Craft Saws (Photo-Etched)

Item No：74094

★This set of thin craft saws is made from photo-etched metal to enable extremely fine cuts. ★The blades feature grips which can be folded over to increase support and this feature also allows them to be fitted onto the Modeler's Knife's handle for greater ease of use.

Information and specifications coming soon.

Display Good Series No.18

Display Case N (w/Base) (Inner 620×125×165mm)

Item No：73018

This display case has the ideal dimensions for displaying 1/350 scale Japanese Navy cruisers such as the Mogami. It protects your ship model against damage, dust, and humidity. The transparent case is made of 3mm acrylic resin and the base is made of MDF finished in dark brown.

Specifications are subject to change without notice.

Limited Edition Mini 4WD Parts

Black Plated Screw Set

Item No：94742

★These screws have black metal plating and features stylish look. ★Set includes an assortment of 2mm screws as well as 2mm lock nuts and washers which are often used on Mini 4WD machines.

Information and specifications coming soon.