TQ R/C & Hobbies

1/48 Aircraft Series No.108

Mitsubishi A6M3/3a Zero Fighter (ZEKE)

Item No：61108

【 The Japan's Mainstay in the Solomons 】 Following the Zero Model 21 (A6M2), which achieved overwhelming victories against Allied forces in the first half of Pacific War, the summer 1942 saw the introduction of the Model 32 (A6M3) which was powered by a Sakae 21 engine and an 11m wingspan with clipped wingtips. Although top speed increased, its range reduced drastically, therefore the Model 22 (A6M3) was rushed into development in order to correct the Model 32's shortcomings. Overall performance improved as the 12m wingspan and folding wingtips were reintroduced to regain maneuverability and new wing fuel tanks restored range to 2,560km. The Model 22 (A6M3a) which was fitted with long-barreled cannons was also put into production. Deployed mainly to the Solomon Islands from early 1943, Zeroes had fierce battles against U.S. fighters.

【 About the Model 】 ★1/48 scale plastic assembly model kit of the Mitsubishi A6M3 Model 22 Zero. ★Length: 190mm, Wingspan: 250mm ★Well-balanced form of the aircraft has been beautifully reproduced. ★Photo-etched parts depict the folded wingtip mechanism. ★The A6M3a which was armed with long-barreled cannons can also be assembled. ★You can choose to assemble the cowl flap in either open or closed position. Also, flaps can be depicted in either up or down positions. ★1 seated and 4 standing pilot figures included. ★Comes with 3 kinds of markings including one to depict the aircraft from the 251st Naval Air Group.

Specifications are subject to change without notice.

1/24 Sports Car Series No.316

ASTON MARTIN DBS

Item No：24316

【 Aston Martin's Flagship Model 】 Aston Martin, a renowned British sports car manufacturer founded in 1914, released their flagship DBS in the summer of 2007. The car's design features gorgeous, flowing curves and liberal use of carbon fiber while its front-midship 510hp 5,935cc V12 engine delivers power to the rear wheels via a 6-speed manual gearbox. This car is a scintillating blend of high-performance and hand-crafted luxury. It debuted on the silver screen in the 2006 film Casino Royale as James Bond’s favorite ride before it was officially unveiled in August 2007.

【 About the Model 】 ★This is a 1/24 scale plastic assembly kit model. ★Length: 196mm, Width: 86mm, Height: 55mm. ★The V12 engine has been accurately reproduced. The bonnet can be opened to showcase the engine compartment. ★Rear suspension and sub-frame faithfully rendered. ★Metal-plated parts such as wheels and front grille included. ★Metal transfer depicts realistic mirror surfaces. ★Photo-etched grilles for intakes enhance exterior realism.

Specifications are subject to change without notice.

1/20 Grand Prix Collection No.60

Lotus Type 79 1978

Item No：20060

【 The Black Beauty 】 In 1977, Lotus introduced a ground effect car, the Type 78 which had a slim monocoque chassis and wide side pontoons with undersurfaces like inverted aircraft wings. Round 6 Belgium GP in the 1978 season saw the introduction of the further evolved Type 79. The fuel tanks were placed behind the cockpit and the rear suspension featured effective inboard dampers. Mario Andretti was paired with Ronnie Peterson that year, and the former drove the car to an impressive pole-to-finish debut win. More success followed, with Andretti taking 5 wins to claim the drivers' championship and Peterson adding another win to help the team claim the constructors' title. The Type 79 greatly influenced later F1 machines and its overwhelming speed as well as graceful design and livery earned it the nickname “Black Beauty.”

【 About the Model 】 ★1/20 scale plastic assembly kit model of the Lotus Type 79 1978. Length: 220mm, Width: 108mm. ★The sleek, low profile of the machine has been realistically reproduced. ★Front and rear cowlings are removable even after assembly to showcase cockpit, engine, and suspension. ★The distinctive undersurface shape of side pontoons are accurately rendered. ★Metal covers for air funnels enhance great scale realism. ★Rubber tires included. ★2 kinds of decals to depict No.5 and No.6 cars are included. ★2 types of roll bars as well as air outlets on side pontoons are included to allow the choice of assembly from the car driven by Mario Andretti or Ronnie Peterson from either the British GP or German GP.

Specifications are subject to change without notice.

Masterwork Collection No.70

1/12 Suzuki RGV-Γ (XR89) '99 #10 (Finished Model)

Item No：21070

★1/12 scale finished model of the Suzuki RGV-Γ which demonstrated impressive performance in the hands of Kenny Roberts, Jr. in the 500cc class of the 1999 Moto GP. ★The unique form of the bike as well as its distinctive livery have been accurately reproduced. ★Internal weight provides the model with a great scale presence.

Information and specifications coming soon.

Masterwork Collection No.71

1/12 Suzuki RGV-Γ (XR89) '99 #9 (Finished Model)

Item No：21071

【 Suzuki's Revival in 1999 】 The Suzuki RGV-Γ made impressive results in the GP 500cc class at the 1999 World Road Race Championships by team riders Kenny Roberts, Jr. and Nobuatsu Aoki. The bike was powered by a V-type 4-cylinder engine cradled by an aluminum twin-tube frame. With a greater overall balance to unlock its maneuverability and cornering speed, K. Roberts, Jr. took four victories, including the first two races in the season, and secured an overall season ranking of second place to prove Suzuki's potential.

【 About the Model 】 ★This is a 1/12 scale finished plastic display model. Length: 168mm, Width: 52mm, Height: 93mm. ★This model depicts the bike No.9 which was ridden by Nobuatsu Aoki. ★Distinctive form of the bike, including the curved seat and upper cowl, has been realistically reproduced. ★Cable parts are included to depict acceleration and brake wires. ★The model features high-quality paint finish with pad-printed markings. ★Metallic stickers are used for inner struts in front forks to enhance realism. ★The V-type 4-cylinder engine has an internal weight for greater presence. ★Solid rubber tires included.

Click here to see information on assembly kit version.

Specifications are subject to change without notice.

1/12 Motorcycle Series No.16

Honda CX500 Turbo

Item No：14016

【 Born From The Honda's Challenging Spirits 】 The 1980 IFMA trade show in Cologne, Germany saw the debut of the Honda CX500, the world’s first turbocharged production motorcycle. The liquid-cooled V-twin engine was fitted with a turbo unit which was developed together with IHI (Ishikawajima-Harima Heavy Industries). In conjunction with Honda’s computerized fuel injection system, the 500cc engine produced an impressive 82hp. Other technical advances included a cowling which was designed through extensive wind tunnel testing, Honda’s unique Pro-Link rear suspension, and a 4-step adjustable anti nose dive front suspension. With its progressive design and excellent power, the CX500 was one of the most significant motorcycles ever produced.

【 About the Model 】 ★This is a 1/12 scale assembly plastic model kit of the Honda CX500 Turbo, the world’s first turbo-charged production motorcycle. ★Length: 180mm, Width: 60mm, Height: 112mm ★The model featured highly-detailed turbo-charged engine which helps you to understand the mechanisms of the turbo system. ★Metal screws are used to attach wheels and front forks for increased rigidity. ★Front and rear brake pipes as well as other cables are depicted with vinyl tubing. ★One-piece cowling features an integrated headlight. ★High-quality Cartograf markings included.

Specifications are subject to change without notice.

1/10th SCALE RADIO CONTROL 4WD OFF ROAD CAR

TOYOTA LAND CRUISER 40

Item No：58445

【 The Pioneer Vehicle 】 Of the many iterations of the Toyota Land Cruiser, the 1972 Land Cruiser 40 is particularly popular thanks to its attractive styling and has a large fan base around the world. This R/C model's body is made from ultra durable polycarbonate and the actual vehicle's front bumper and 35-inch tires are accurately reproduced to provide a realistic scale appearance. In addition, 2 white and 2 red LEDs depict the head and tail lights respectively, further enhancing its presence. The tough CC-01 chassis is equipped with a front independent double wishbone and rear 4-link rigid axle suspension setup, allowing you to enjoy exciting cross-country, off-road, and on-road R/C action.

【 All Terrain Chassis 】 Excellent ground-hugging, long-stroke suspension system consists of front double wishbone and rear 4-link rigid setups and is equipped with 4 oil dampers. Highly reliable and efficient full-time 4WD system features a front-mounted motor, which transmits power to the front wheels via the gearbox and to the rear wheels via the propeller shaft with universal joints. Front and rear differentials enable smooth cornering. For even greater off-road performance on rough terrain, the rear differential may be locked during assembly.

【 Specifications 】 ●Length: 426mm, Width: 195mm, Height: 215mm　●Wheelbase: 252mm　●Tread (Front and Rear): 160mm　●Tire Width/Diameter (Front and Rear): 30/90mm　●Ladder Frame Bathtub Type Chassis　●Longitudinally Placed Motor Shaft-Driven Full-Time 4WD　●Front and Rear 3-Bevel Differential Gears　●Front Suspension: Double Wishbone, Rear Suspension: 4-Link Rigid 　●Front and Rear CVA Oil Dampers　●Gear Ratio＝1：14.67　 ●TEU-104BK ESC (Electronic Speed Controller) Included　●RS540 Type Motor Included　●Comes with LED Light Unit (TLU-01), two 5mm white LEDs for headlights, and two 5mm red LEDs for taillights.

【 Separately Required Items 】 ●2-channel R/C Unit　●Tamiya Battery Pack and Charger ●8xR6/AA/UM3 Batteries for Transmitter

※Click here for related product: XB Mitsubishi Pajero Metaltop Wide (Item 57782)

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.466

Motul NISMO GT-R Tokachi 24Hours Race (TA05 ver.II)

Item No：58466

【 Tuned For 24Hours Race 】 This is a 1/10 scale R/C model of the MOTUL NISMO GT-R which raced at Tokachi, the only 24 hour endurance race held in Japan. The lightweight polycarbonate body realistically reproduces the GT-R’s distinctive form. In addition, separately molded parts for the unique rear wing, side mirrors, and light cases are included to enhance realism. Markings to depict sponsor logos are also included to allow to finish the body at ease.

【 The Evolved Race-Spec Chassis, TA05 ver.II 】 The chassis width has been reduced for greater roll movement range during cornering. Thanks to the one-piece aluminum motor mount with cantilever center shaft, the position of the battery pack has been shifted forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T center pulley. The four wheel double wishbone suspension features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes.

【 Specifications 】 ●Length: 444mm, Width: 187mm, Height: 132mm ●Wheelbase: 257mm ●Tread (Front & Rear): 165mm ●RS540 Type Motor ●Horizontally-Placed Motor Equal Length 2-Belt Driven 4WD ●Front & Rear Ball Differentials ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Front & Rear CVA Shock Units Super Mini ●Gear Ratio=7.19:1 ●Tire Width/Diameter (Front & Rear): 24mm/64mm ●Requires an Electronic Speed Controller

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries for transmitter (x8)

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.465

Fiat Abarth 1000 TCR Berlina Corse (M-05)

Item No：58465

【 Classic on Modern 】 The Fiat Abarth 1000TCR Berlina Corse won European Touring Car Championship titles in 1968 and 1969. Based on the Fiat 500, this machine was equipped with a 948cc engine and had an impressive power of over 100hp, which made it possible to beat other race cars with larger displacements. This little monster now comes reproduced as a 1/10 scale R/C model. The classic body features such as the radiator integrated into the front bumper and large fenders have all been realistically reproduced. Furthermore, the rear-mounted exposed engine and side mirrors have also been recreated with separate plastic parts. The modern M-05 chassis features a low center of gravity and optimum chassis balance to offer you a superb handling and great excitement of R/C driving.

【 Low Center of Gravity M-05 Chassis 】 The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　an easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provides stable high-speed cornering. In addition, 55mm dia. slick tires are mounted on wheels which feature the same design as those from an actual vehicle to enhance realism.

【 Specifications 】 ●Length: 374mm, Width: 168mm ●Wheelbase: 210mm　●Front Motor Front Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio=5.8 :1 ●Tire Width/Diameter (Front & Rear): 25/55mm ●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 batteries (x8) for transmitter

Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.462

Datsun 240Z Rally (TT-01 Type-E)

Item No：58462

【 Safari Rally Hero 】 Debuted in 1969 as Nissan's domestic sports car, the first generation Fairlady Z actively took part in motor sports racing and showed off its superb performance especially in rally races. This 1/10 scale R/C assembly kit model replicates one such rally car, the Datsun 240Z. The distinctive long-nose, short-deck body silhouette has been realistically reproduced with durable polycarbonate. Separate parts for metal-plated front and rear bumpers, light cases, and light pods are included to enhance scale realism. In addition, LEDs are included to depict headlights (white) and taillights (red). Separately available LEDs can also be installed into light pods to further enhance realism.

【 Evolved Chassis 】 The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. In addition, racing radial tires with realistic tread pattern are mounted on black dish wheels.

【 Specifications 】 ●Length: 451mm, Width: 190mm, Height: 137mm　●Wheelbase: 251mm　●Tread (F/R): 161mm　●Tire Width/Diameter (F/R): 27/67mm　●Bathtub Type Chassis Frame　●Longitudinally-Placed Motor Shaft-Driven Full-Time　●F/R 3-Bevel Differential Gears　●3-Piece Steering Tie-Rod　●4-Wheel Double Wishbone SUspension　●F/R Friction Dampers　●Gear Ratio＝8.35:1　●Type540 Motor Included　●Requires Electronic Speed Controller (separately available)

【 Separately Required Items 】 ●Finespec FM Radio Control System w/ESC ●R6/AA/UM3 Batteries (x8) for Transmitter

Specifications are subject to change without notice.