TQ R/C & Hobbies

Electric R/C Car Series no.732

1/10 R/C Alfa Romeo Giulia Sprint GTA Club Racer (MB-01)

Item No: 58732

Go Sporty!
The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack. This assembly kit recreates that classic car as a radio control model, with a polycarbonate body plus stickers to create a design inspired by the numerous club racers driven run by amateur drivers.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Specifications
★Length: 385mm, width: 168mm, height: 132mm ★Wheelbase: 225mm (Middle) ★Tread: 140mm (front & rear) ★Tire width/diameter: 25/59mm (front & rear) ★Bathtub type chassis ★Midship motor, rear-wheel drive ★4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers ★Gear ratio = 5.83:1 (using kit 29T pinion) ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of December 11, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.728

1/10 R/C Super Sabre (2023)

Item No: 58728

At the Sharp End
This R/C model assembly kit is a re-released and updated version of the Super Sabre, a beginner-friendly buggy released in 1987. It is based upon a bathtub frame chassis with 4WD and CVA oil dampers: a recipe for off-road success enhanced by gripps hybrid tires. The aerodynamic polycarbonate body is pre-painted and pre-cut, and really looks the part on this speedy model.

Capable Off-Road Chassis
This shaft-driven 4WD chassis has a midship motor and sealed front and rear gearboxes, each containing a differential gear for smooth cornering. It is broken down into three easily-maintained sections: bathtub frame and gearboxes, and features short CVA oil dampers on the double-wishbone suspension, plus a front stabilizer to combat roll. Oval block/pin spike hybrid tires deliver superb grip, and together with the efficient 4WD make the Super Sabre right at home off-road.

Specifications
★Length: 385mm, width: 234mm, height: 135mm ★Wheelbase: 260mm ★Tire width/diameter: 31/88mm (front), 38/88mm (rear) ★Tread: 196mm (front), 194mm (rear) ★Bathtub chassis frame ★Shaft-driven 4WD ★3-bevel differential gears ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★CVA oil dampers ★Gear ratio = 8.70:1, 10.04:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of December 11, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2078

Aluminum Differential Holders (0.8mm Offset, 2pcs.)

Item No: 22078

★Use these components in place of plastic K1 parts in belt-driven 4WD chassis. ★Precision crafted in aluminum, they offer excellent durability and ensure efficient drive by maintaining their shape. ★They also boost overall bulkhead rigidity to make the most of oil damper effectiveness.

Compatible Chassis
TRF420X & TRF420 Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of November 22, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2079

Aluminum Differential Holders (0.5mm Offset, 2pcs.)

Item No: 22079

★Use these components in place of plastic K1 parts in belt-driven 4WD chassis. ★Precision crafted in aluminum, they offer excellent durability and ensure efficient drive by maintaining their shape. ★They also boost overall bulkhead rigidity to make the most of oil damper effectiveness. ★These parts' offset of 0.5mm gives an alternative to the kit standard 0.8mm, letting you fine-tune your car just how you want to.

Compatible Chassis
TA08 PRO, TRF420 & TRF420X Chassis

*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

Information is current as of November 22, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2080

Lo-Mount Aluminum Retainers for Large-Diameter Springs (4pcs.)

Item No: 22080

★These retainers let you mount the large-diameter springs from Super Short Big Bore Dampers and the like in a lower position, leading to smoother spring motion and letting you get the most out of your dampers' stroke. ★A more nimble car will show improved footwork through corners. ★Parts have a stylish blue anodized finish. ★Includes four retainers and four 5.5x0.5mm aluminum spacers.

Information is current as of November 22, 2023. Specifications are subject to change without notice.

1/20 Grand Prix Series no.72

Toyota Celica LB Turbo Gr.5

Item No: 20072

Aero Wonder
The Toyota Celica LB Turbo was a Group 5 car developed for the 1977 DRM (German Racing Championship). Based upon the road car Celica Liftback 2000GT, the car featured aerodynamic components such as bulging over fenders and rear wing, and employed numerous FRP body panels, which helped keep its weight down to a mere 860kg. An body extensively modified by Schnitzer and a 2,090cc, 560hp inline-4 DOHC turbo engine were utilized. This car made its debut in July 1977, and in October of the same year, it beat the Porsche 935 and achieved its maiden victory.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 240mm, width: 105mm, height: 61mm. ★The highly modified fastback form is captured in style. ★A removable front cowl lets you take a closer look at the detailed 560hp engine underneath. ★The roll cage is recreated in the interior. ★Solid synthetic rubber tires are different widths front and rear, both with a realistic finish. ★Cartograf decals are included, and give you a choice between No.56 and No.68 cars. ★The kit comes with a driver figure.

★Present your model as it deserves to be displayed
Item 73007 Display Case F

Information is current as of December 11, 2023. Specifications are subject to change without notice.

1/24 Sports Car Series no.169

Fiat 500F

Item No: 24169

Little Legend
Adorable looks and an extremely nimble drive are just two of the reasons behind the massive popularity enjoyed by the Fiat 500, which was adopted by many residents of Italy as their daily run-around. The second generation of the car was manufactured between 1957 and 1975. Measuring in at less than three meters, this rear-wheel drive car's 500cc 2-cylinder engine was housed in the back; it could just about hold four people in its rather spartan interior. The 500F was first sold in 1965 and was updated with front-hinged doors and larger tail lamps. The Fiat 500 would of course become a worldwide hit, and even evolved into a third generation model in 2007.

About the Model
★This is a 1/24 scale plastic model assembly kit. Length: 124mm, width: 56mm, height: 57mm. ★The adorable form of this classic car is accurately recreated, with a choice of open and closed top parts. ★Engine and transmission are shown in detail, and the former is visible under the opening rear hood. ★Suspension is depicted with accuracy. ★The model comes with solid synthetic rubber tires. ★Optional decals are included to add racing stripes to the car. ★Special box art features an urban setting, where the 500F is right at home.

★Present your model as it deserves to be displayed
Item 73004 Display Case C

Information is current as of December 12, 2023. Specifications are subject to change without notice.

Special Edition Mini 4WD Productx

Rayvolf Polycarbonate Body Special (Light Blue) (MS)

Item No: 95572

Cool and sporty model with many useful parts
This kit creates a Special version of the Rayvolf with large rear wing. The lightweight and tough polycarbonate body is based on the MS Chassis which features a 3-piece design for flexible setup. The combination of light blue and white gives a cool and sporty image. Silver color plated Y-spoke wheels use super hard and small-diameter low-profile tires with sidewall print, facilitating both great drive performance and excellent visuals. Dedicated clear stickers depict cool blue-based graphics and logos.

MS Chassis
The direct drive, double-shaft motor MS Chassis features a three-piece setup split into nose, center and tail units for easy attachment and detachment, with batteries flanking the central motor for superior balance in addition to the low center of gravity. The chassis has a gear ratio of 3.5:1 and is fitted with 16mm plastic rollers.

Specifications
★Length: 154mm ★Width: 92mm ★Height: 45mm ★Includes double shaft motor ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of October 14, 2020. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

19mm Aluminum Ball-Race Rollers (6 Spokes)
w/Plastic Rings (Red)

Item No: 95513

★These are 6-spoke versions of race-spec ball bearing-fitted rollers in lightweight and durable aluminum. ★520 ball bearings come pre-installed for super smooth rotation. ★Components feature a reversible design. ★Plastic rings for the outside are molded in a lively shade of red. ★Small parts such as screws and spacers are included for use in attchment.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars
*Some bodies may require modification.

Information is current as of October 8, 2019. Specifications are subject to change without notice.

1/14 R/C Truck Series no.373

Scania 770 S 6x4 (Silver Edition)

Item No: 56373

Top-Grade Scania
This R/C model assembly kit recreates the Scania 770 S 6x4, a double rear-axle drive trailer head equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp added in 2020 to the Swedish manufacturer Scania's top-grade S Series. The kit features a highly realistic body, plus a working chassis with numerous metal parts, and a transmission that can be operated via transmitter.

Pre-Painted Body
Cab, roof, spoiler, bumpers, side guards, front fenders and more have been painted in a stunning silver tone and given a clear topcoat. With that job off of the table, assemble the parts, brush paint areas such as window frames, and the body will be ready to put on your model.

Specifications
●Length: 532mm, width: 193mm, height: 307mm, weight (without optional parts): approx. 4.0kg ●Wheelbase: 237mm + 103mm ●Tread: 155mm (front), 138mm (rear, double tire) ●Chassis: aluminum & polycarbonate resin ladder frame ●Suspension: front/rear leaf spring rigid ●Caster angle (front & rear): 0° ●Camber angle (front & rear): 0° ●Toe angle (front & rear): 0° ●Aluminum dummy dampers (front/rear) ●Rear axle drive　●3-gear transmission (gear shifting operated via transmitter) ●Gear ratio: (1st gear) 32.49:1, (2nd gear) 17.76:1, (3rd gear) 10.66:1 ●3-bevel differential gears ●Type 540 motor ●Tire width/diameter: 30mm/85mm (front); 22mm/83mm (rear) ●Requires four R6/AA/UM3 batteries for transmitter (sold separately).

Realistic Lights, Sounds, and Vibration
Tamiya Multi-Function Control Units (included for Japanese market only, available separately overseas) offer light, sound, and vibration operation to accompany your R/C truck experience. Engine sounds have been digitally recorded from an actual truck, and together with air horn, gear shifting, and many other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

Semi-Trailers Separately Available
Various types including semi-trailer, tank-trailer, and pole-trailer, are currently available. Attach any one of them via the coupler on the model to create an exciting combination over a meter in length.

Information is current as of December 1, 2023. Specifications are subject to change without notice.