TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

tony

tony

JMSDF Defense Ship FFM-1 Mogami

Friday, 03 November 2023 14:52 Published in Tamiya

1/700 Water Line Series

JMSDF Defense Ship FFM-1 Mogami

Item No: 31037

The first ship of the revolutionary Mogami class, the FFM-1 Mogami was commissioned in April 2022. The first JMSDF defense ship to be given mine-clearing capabiliteies, it features mine-clearing equipment under the flight deck. Twelve ships are planned for the class, and are presently being rolled out with Mine Warfare and Fleet Escort Forces.
FFM-1 Mogami specifications: ★Displacement: 3,900 tons ★Length: 133.0 meters ★Engine output: 70,000PS ★Speed: 30 knots approx. ★Crew: 90

About the Model
★This is a 1/700 scale plastic model assembly kit. Length: 190mm, width: 23mm. ★The highly modern low-observability design of the ship and its superstructures is artfully captured. ★Mast parts are slide molded for a modeler-friendly assembly experience without sacrificing detail. ★Superstructure elements are assembled in individual blocks which can be snap-fitted into the hull without the need for cement. ★Choose between open and closed helicopter hangar shutters. ★The main gun is movable and features barrel elevation. ★Features 0.4mm thickness antenna components. ★Decals are included to recreate the first six ships of this class. Deck decals save time on the paint job.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

Special Edition Static Model Product

1/35 German Tank Panzerkampfwagen IV Ausf.F & Motorcycle Set "North Africa"

Item No: 25208

Short Barrel Swansong
The Ausf.F was the final short barreled variant of the long-serving Panzerkampfwagen IV. Sporting a 7.5cm gun and endowed with greater survivability than the preceding Ausf.E, it was also given wider tracks to offset its extra weight. Around 470 were manufactured between April 1941 and May of the next year, and most were sent to the Eastern Front or to North Africa. Those sent to the latter fought hard against heavily-armored opponents such as the British Matilda, earning the trust of their crews.

About the Set
★This is a 1/35 plastic model assembly kit set. ★Pz.Kpfw.Iv Ausf.F length: 168mm, width: 82mm; Motorcycle length: 54mm. ★The boxy form of the short-barrel 7.5cm gun Ausf.F is captured in style. ★Tank tracks are assembly type, with one piece straight sections. ★The trusty, simple motorcycle silhouette is also accurately depicted. ★This set comes with six full body figures and a torso figure radio operator. ★Why not assemble this into a diorama showcasing a scene in the North African theater? ★Two Afrika-Korps marking options are included.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

Honda CX500 Turbo

Friday, 03 November 2023 14:47 Published in Tamiya

1/12 Motorcycle Series No.16

Honda CX500 Turbo

Item No:14016

【 Born From The Honda Spirit of Challenge 】 The 1980 IFMA trade show in Cologne, Germany saw the debut of the Honda CX500, the world’s first turbocharged production motorcycle. The liquid-cooled V-twin engine was fitted with a turbo unit which was developed together with IHI (Ishikawajima-Harima Heavy Industries). In conjunction with Honda’s computerized fuel injection system, the 500cc engine produced an impressive 82hp. Other technical advances included a cowling which was designed through extensive wind tunnel testing, Honda’s unique Pro-Link rear suspension, and a 4-step adjustable anti nose dive front suspension. With its progressive design and excellent power, the CX500 was one of the most significant motorcycles ever produced.

About the Model 】 ★This is a 1/12 scale assembly plastic model kit of the Honda CX500 Turbo, the world’s first turbo-charged production motorcycle. ★Length: 180mm, Width: 60mm, Height: 112mm ★The model featured highly-detailed turbo-charged engine which helps you to understand the mechanisms of the turbo system. ★Metal screws are used to attach wheels and front forks for increased rigidity. ★Front and rear brake pipes as well as other cables are depicted with vinyl tubing. ★One-piece cowling features an integrated headlight. ★High-quality Cartograf markings included.

Specifications are subject to change without notice.

Mini 4WD Lupine Racer 2

Friday, 03 November 2023 14:45 Published in Tamiya

Racing Mini 4WD Series no.102

Mini 4WD Lupine Racer 2

Item No: 18102

★Look who's back - the Lupine Racer! ★This wolf was born to race, and has been given a dark blue version of the open top Thunder Shot body, with the AR chassis molded in red polycarbonate-ABS. ★Orange 5-spoke wheels are paired with hard blue large-diameter slick tires, and metallic stickers are included, too! ★Length: 155mm, width: 97mm, height: 47mm. ★The model comes with a motor, and requires two separately-sold R6/AA/UM3 batteries for operation.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

Mini 4WD New Year's Edition "Year Of The Dragon 2024"

Friday, 03 November 2023 14:44 Published in Tamiya

Special Edition Mini 4WD Product

Mini 4WD New Year's Edition "Year Of The Dragon 2024"

Item No: 95650

★2024 is the year of the dragon in the Chinese zodiac, and what better way to celebrate than with this special Mini 4WD car kit? ★The red and white color scheme on the body and the sparkling gold color Dragon in the driver's seat of the Mach Bullet body are sure to grab some attention! ★The Super-II chassis is molded in red. ★Length: 150mm, width: 97mm, height: 53mm. ★Comes with a motor, and requires two R6/AA/UM3 batteries.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

Avante Mk.III Azure Clear Special (Polycarbonate Body)

Friday, 03 November 2023 14:42 Published in Tamiya

Mini 4WD Product

Avante Mk.III Azure Clear Special (Polycarbonate Body)

Item No: 95464

Clearly Wonderful
This assembly kit creates the Avante Mk.III Azure Clear Special, a special model with lightweight clear polycarbonate body - being light, the body also makes for a lower center of gravity. Clear stickers are included to decorate the model. The 3-piece MS Chassis is molded in black, and consists of N-02 and T-01 units, plus a lightweight Center unit. White large-diameter narrow lightweight wheels are paired with black barrel tires featuring pad printed white sidewall lettering. This race spec model also includes hollow shafts.

MS Chassis
The MS Chassis has its double-shaft motor and batteries mounted at the center of the chassis for optimum weight distribution and superb stability at high speeds. The nose, center, and tail units are designed for easy attachment/detachment, allowing quick setting adjustments.

Specifications
★Length: 152mm ★Width: 92mm ★Double-shaft motor included ★Easy snap-together assembly

Separately Required Items
★R6/AA/UM3 batteries (x2)

Information is current as of November 5, 2018. Specifications are subject to change without notice.

Special Edition Mini 4WD Product

HG Aluminum Wheels for Low Profile Tires II (Reversible, 2pcs.)

Item No: 95602

★These classy machined aluminum wheels will add a bit of extra shine to your Mini 4WD pride and joy. ★Not only that, they offer exceptionally true rotation and superior durability in the event of a crash or impact. ★Two wheels weigh around 6.5 grams combined, allowing you to alter chassis balance depending upon where they are installed. ★Their reversible design means they can be flipped over to allow installation on Super X and XX chassis (72mm shafts).

Compatible Cars
Mini 4WD and Mini 4WD PRO cars setup for use with small-diameter, low-profile tires
*Some bodies may require modification.

Information is current as of November 5, 2020. Specifications are subject to change without notice.

Bipedal Walking Robot

Friday, 03 November 2023 14:35 Published in Tamiya

Educational Construction Series no.256

Bipedal Walking Robot

Item No: 70256

About the Model
★This quirky robot strides forward through the side-to-side sliding motion of its central weight transfer unit, which contains the gearbox and battery case. As it slides, the opposite leg rises and moves forward. ★Change gearbox direction and limiter positions to add turns. ★An included guide rod can be fitted to help the robot avoid pesky obstacles like walls.
★Length: 85mm, width: 132mm, height: 107mm. ★Requires two R03/AAA/UM4 batteries (sold separately). ★Comes with a type 130 motor.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

Chipping Liquid

Friday, 03 November 2023 14:31 Published in Tamiya

Tamiya Finishing Materials Series no.225

Chipping Liquid

Item No: 87225

★Chipping is an excellent way of adding realism to your static models, simulating wear by allowing a base color to peep through the top coat. ★This handy product is applied onto the base coat, with an acrylic top coat applied there after. ★Apply water to the top coat and it comes away to reveal the base color underneath.

About the Product
★Comes in a 40ml bottle. ★Water-based ★The image at right shows an example of use.
*Use Tamiya Color lacquer-based paints (LP, TS, AS series) as the basecoat. Please note that gloss and metallic colors cannot be used. Matte metallic colors are OK.
*Use Tamiya Color acrylic paints for the top coat.

Information is current as of October 3, 2023. Specifications are subject to change without notice.

PS Dark Blue

Friday, 03 November 2023 14:28 Published in Tamiya

Special Edition Tamiya Color Spray Paint for Polycarbonate

PS Dark Blue

Item No: 69944

★This tone is perfect for recreating the color used on the 1/10 R/C Fiat 131 Abarth Rally Olio Fiat model. ★Contents: 100ml

Tamiya Color Spray Paints for Polycarbonate
These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling. Paint the part from the inside, keeping the can about 30cm from the surface. After it has dried, apply another coat. Small details should be brush painted beforehand, using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on glow engine R/C car bodies.

Specifications are subject to change without notice.

Page 9 of 329

Social sharing

Who's Online

We have 1558 guests online