TQ R/C & Hobbies

1/10 Electric R/C Car Series No.630

Plasma Edge II (TT-02B Chassis)

Item No: 58630

★The Plasma Edge II is a controllable, fun-to-drive R/C 4WD buggy assembly kit. ★It uses a lightweight yet tough polycarbonate body that can be decorated with the bright and racy stickers included in the kit. ★The TT-02B chassis offers reliable and effective shaft-driven 4WD, and comes with white CVA oil dampers for a great ride, plus eye-catching fluorescent yellow dish type wheels.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Electric R/C Car Series No.631

Subaru Impreza Monte-Carlo '99 (TT-02 Chassis)

Item No: 58631

★This R/C model assembly kit recreates the Subaru Impreza which competed on the 1999 rally circuit. ★The unmistakeable form is recreated in polycarbonate, with stickers included to depict the car's livery and markings. ★The TT-02 chassis provides an adaptable, reliable and controllable shaft-driven 4WD base for the model. ★Gold fin-spoke wheels are paired with hard-working rally block tires.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.196

XB Mercedes-Benz Unimog 425 (CC-01 Chassis)

Item No: 57896

★This factory-finished Expert Built (XB) R/C model recreates the 425, a variant of the hard-working and versatile Mercedes-Benz Unimog which first appeared in 1974. ★The lines of the boxy body are expertly recreated in durable polycarbonate, which is pre-painted in orange with light cases installed. Fit with separately-sold LED units to light up the model! ★The CC-01 is a cross-country shaft-driven 4WD chassis that gives a reliable and capable ride whether off-road or on.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Grade Up Parts Series No. 497

HG Carbon Reinforcing Plate for 13/19mm Roller (1.5mm)

Item No: 15497

★These plates make possible a whole range of Mini 4WD car modifications, including the installation of 13mm and 19mm rollers while keeping the car inside official Mini 4WD width regulations. ★The parts feature white printed Tamiya logo and roller size markings. ★Do not use cleaners, as they may damage the printed surface.

Compatible Chassis
Mini 4WD and Mini 4WD PRO cars
★Use with separately sold rollers. ★Some bodies and chassis may require modification.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Educational Construction Series No.223

Friction Powered Snail

Item No: 70223

★This eco-friendly kit creates an amusing snail model which moves without the need for batteries or motor! ★The motion of the flywheel powers the model forwards in typically languid snail fashion. ★A soft resin PP piece is used to express the shell and body. ★Altering the attachment position of the cranks which drive the model allows you to change the way the snail moves.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

Educational Construction Series No.224

Swimming Dolphin

Item No: 70224

★Enjoy watching this model as it glides through the water with head and dorsal fin bobbing up and down. ★Powered via cranks by an underwater gearbox, the movement of the soft resin sheet tail makes for a swimming motion that looks just like a real dolphin! ★Changing the position of the float and dorsal fin allows you to make the dolphin swim in circles. ★Alter the attachment position of the cranks to change the swimming style and speed.
*Requires one separately sold R03/AAA/UM4 battery.

Information is correct as of April 26, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.194

XB Honda City Turbo (WR-02C Chassis)

Item No: 57894

A Funky Blast from the Past!
This factory finished R/C model is a comical recreation of a racing version of Honda's 1983 release in Japan - the City Turbo. The tough resin body features crisp molding, and the kit includes a driver figure with helmet to add further mirth to proceedings - both body and driver are painted, and have colorful decorative stickers pre-applied. The WR-02C chassis runs on tires with left-right asymmetric tread patterns.

WR-02C Chassis - Wheelie Fun!
The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the center-mounted motor, and passes it on to the rear wheels. A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling.

2.4GHz Transmitter Included
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.

Specifications
●Length: 345mm、Width: 210mm、Height: 165mm　●Wheelbase: 185mm ●Tread: 165mm (Front), 170mm (Rear)　●Tire Width/Diameter: 35/70mm (Front), 42/70mm (Rear)　●Resin Monocoque Frame ●Rear-Wheel 2WD ●4-Wheel Double Wishbone Suspension　●Front/Rear Friction Dampers　●2-Piece Steering Tie Rod　●3-Bevel Differentials ●Gear Ratio: 16.5:1　●Torque-Tuned Motor ●Electronic speed controller (forward/reverse type)

Separately Required Items
●R6/AA/UM3 batteries for transmitter

Information is correct as of March 17, 2016. Specifications are subject to change without notice.

1/10 Expert Built Series No.195

XB Racing Fighter (DT-03 Chassis)

Item No: 57895

★The stylish Racing Fighter also joins the Expert Built series of factory finished models! ★The durable polycarbonate body comes pre-painted with racy markings already applied. ★The DT-03 is a long-wheelbase monocoque type chassis that offers superb stability and uncomplicated assembly.

Information is correct as of March 3, 2016. Specifications are subject to change without notice.

1/35 Military Miniature Series No.348

Russian Self-Propelled Gun SU-76M

Item No: 35348

In the Nick of Time
The SU-76M filled an important and particularly pressing Soviet need for an effective self-propelled gun against invading German forces after the start of Operation Barbarossa in WWII. Based upon the T-70 light tank chassis, it was production-friendly and some 11,000 were manufactured between 1943 and 1945. Its 76.2mm ZiS-3 gun helped it to play a valuable part offering supporting fire and as an anti-tank weapon. Superior mobility was its calling card, and the SU-76M was also able to operate in close unison with infantry units.

About the Model
★This is a 1/35 scale plastic model assembly kit of the Russian self-propelled gun SU-76M. ★ Length: 146mm, width: 78mm. ★Exhaustive surveys of a real SU-76M ensure the model accurately captures the open-top self-propelled gun form. ★76.2mm gun parts breakdown and attachment was inspired by the real vehicle. Poly caps allow movement. ★Realistic assembly type tracks feature one-piece straight sections and jig for construction. ★Contains three figures in authentic pose, and comes with two marking options.

Information is correct as of March 28, 2016. Specifications are subject to change without notice.

1/35 Military Miniature Series No.349

French Light Tank AMX-13

Item No: 35349

★This plastic model assembly kit recreates the AMX-13, a light tank operated by French forces post-WWII. It was designed as a lightweight vehicle that could be airlifted with little trouble, an important feature given the signs of discontent in the French colonies. ★Tamiya designers closely measured and studied real AMX-13s in the making of this model, leading to a highly accurate depiction of the tank's oscillating turret and overall form. ★The canvas cover is also artfully captured in resin. ★Comes with a commander torso figure and 2 marking options. ★Includes realistic belt-type tracks, plus photo-etched engine grille part.

Information is correct as of March 3, 2016. Specifications are subject to change without notice.